iRobot Braava 320 Replacement Battery 7.2V 1500mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
iRobot Braava 320 Replacement Battery 7.2V 1500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
iRobot Braava 320 Replacement Battery 7.2V 1500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.2V
Amp
1500mAh
iRobot Braava 320 / 321 — 7.2V Ni-MH Replacement Battery (GPRHC152M073)
This is a 7.2V 1500mAh Ni-MH battery for the iRobot Braava 320 and Braava 321 floor mopping robots. It replaces OEM part GPRHC152M073 and 4408927. The battery powers the drive motor, onboard navigation, and the wet and dry cleaning systems.
- Braava 320 and 321 platform fit: Both models share the same battery bay, connector pinout, and 7.2V supply rail. The Braava's NorthStar navigation module and motor controller both draw from this single cell pack, so voltage stability across the discharge curve matters more here than in simpler devices.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on a Braava 320 unit. The BMS accepted the pack without error flags, and the robot completed navigation sequences without mid-cycle voltage drops or reset events.
- Ni-MH storage tip for the Braava 320: Ni-MH cells left in the robot on a powered base between cleaning sessions develop voltage depression faster than cells stored partially discharged and off the charger. If the Braava sits unused for more than a week, remove the battery from the dock entirely.
Why the Braava 320 stops mid-clean even with charge showing on the indicator
The Braava's battery indicator reads state of charge from a voltage estimate, not a fuel gauge IC. An aged Ni-MH cell can sit at a nominal voltage under no load but sag sharply the moment the drive motor engages. When voltage drops below the motor controller's cutoff threshold — typically around 6.0V under load — the robot halts and returns to base even though the indicator still shows partial charge. This is a cell capacity problem, not a software fault. A fresh 1500mAh pack restores the voltage buffer the motor controller needs to complete a full room cycle.
Braava 320 not responding after battery sits unused for several months
Ni-MH cells self-discharge at roughly 1–2% per day at room temperature. A Braava left on a shelf without a maintenance charge will have a deeply depleted pack within weeks. At very low voltages the robot's charging circuit may not recognise the battery as valid and will refuse to charge it. Place the battery on a standalone Ni-MH charger capable of a recovery or trickle mode first — recover to at least 7.0V — then return it to the Braava dock for a full charge cycle.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: iRobot
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Braava 320 keeps stopping and going back to its base before it has cleaned the whole room — is the battery the cause?
Yes, and the cause is voltage sag under motor load, not a navigation fault. An aged Ni-MH cell reads acceptable on the indicator at rest but drops below the motor controller's cutoff the moment the drive wheels engage on a longer run. The indicator is based on resting voltage, so it can still show charge when the cell can no longer sustain load. Replace the cell and confirm resting voltage sits above 7.8V after a full charge.
The Braava 321 starts a cleaning pass, then cuts out for a few seconds and restarts on its own — what is happening?
This is a BMS overcurrent trip caused by a momentary voltage collapse, not a software glitch. When the drive motor works harder — turning, reversing, or crossing a floor transition — current demand spikes and a degraded cell cannot supply it cleanly. The BMS interrupts the circuit to protect the pack, then resets once voltage recovers. Check that the battery terminals are clean and seated fully; if the issue continues, the cell capacity has fallen too low to handle motor-start current and replacement is the fix.
I left my Braava 320 sitting on its charging base for three months and now it will not hold a charge — did the charger damage the battery?
Continuous trickle charging is the most common cause of capacity fade in Ni-MH packs. The Braava base does not cut off completely when the cell is full — it holds a low maintenance current — and Ni-MH chemistry degrades faster under prolonged low-rate charge than Li-ion does. The result is a cell that charges quickly, reads full, and then drains within minutes of use. Going forward, charge the replacement pack to full, then remove it from the base and store the robot unplugged until the next use.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






