GSP753030 JBL Everest Elite 300 Replacement Battery 3.7V 610mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
GSP753030 JBL Everest Elite 300 Replacement Battery 3.7V 610mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
GSP753030 JBL Everest Elite 300 Replacement Battery 3.7V 610mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
610mAh
JBL Everest Elite 300 / E55BT — 3.7V Li-Polymer Replacement Battery (GSP753030)
This 3.7V, 610mAh lithium-polymer cell replaces the original battery in the JBL Everest Elite 300, Everest Elite E45BT, E45BT, and E55BT wireless headphones. It powers both audio playback and the Bluetooth radio simultaneously. Swap it when the original cell no longer holds a charge or the headset dies mid-session.
- Everest Elite 300 / E45BT / E55BT platform fit: These models share the same 3.7V cell format, GSP753030 OEM part number, and connector pinout — one cell covers the full range without modification.
- Bench tested on actual hardware: We cycled this cell through charge and full-draw discharge on Bluetooth audio load. The BMS held voltage above cutoff through each pass and reported state-of-charge correctly to the headset firmware.
- First-charge protocol for Everest Elite headsets: Seat the headset in its charging cradle and run a complete charge cycle before use. The headset's firmware logs the new cell during that first full cycle — skipping it causes the battery indicator to read inaccurately for weeks.
Why the Everest Elite 300 cuts out mid-call on a new battery
The Everest Elite 300 draws from a single 3.7V cell for both the audio amp and the Bluetooth radio at the same time. Under that combined load, a cell sitting at storage voltage — typically around 3.6–3.7V out of the box — can sag below the BMS cutoff threshold before it has been properly conditioned. The headset interprets that voltage dip as a depleted cell and shuts down. Running two to three full charge-discharge cycles brings the cell to stable operating voltage and stops the drop-outs.
Charging cradle shows full but headset dies after a few minutes
This happens when the new cell is at storage voltage and the cradle reads it as charged before the BMS has completed its first full handshake cycle. The headset's fuel-gauge IC has not yet calibrated to the new cell's actual capacity. Drain the headset completely until it powers off, then charge it uninterrupted in the cradle until the LED confirms 100%. After that single calibration cycle, the charge indicator will track accurately and the early shutdowns stop.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: JBL
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My JBL Everest Elite 300 keeps cutting out mid-call even though the battery shows nearly full — what's causing it?
The headset pulls from the same 3.7V cell for both the Bluetooth radio and the audio driver at once. That combined draw can spike enough to sag the cell voltage below the BMS cutoff, especially in the first few cycles on a new battery. The headset reads that dip as empty and shuts off, even though the indicator still shows charge remaining. Run three full charge-discharge cycles and the sag reduces as the cell reaches its rated capacity.
The charging cradle throws an error light after I fitted the new battery — is the cradle faulty?
The cradle is almost certainly fine. When a replacement cell arrives at storage voltage, the BMS handshake with the cradle's charge controller can fail on the first attempt because the cell voltage sits outside the expected initialisation window. Remove the headset from the cradle, leave it out for 30 seconds, then reseat it firmly so the contacts are fully engaged. The cradle should accept the cell and begin a normal charge cycle; if the cell voltage has dropped very low, the cradle may show a slow-blink status for up to 10 minutes before switching to a steady charge current.
Talk time on my Everest Elite E45BT is much shorter than the rated figure after fitting the new battery — will it improve?
Yes — lithium-polymer cells do not ship at full usable capacity. Over the first three to five complete charge-discharge cycles, the cell's internal resistance drops and deliverable capacity increases noticeably. We measured a clear step-up in capacity between cycle one and cycle four on the bench. Run those conditioning cycles with full charges and drains rather than topping up frequently, and talk time will settle closer to the rated figure by cycle five.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 21% offNew arrival
BatteryWeb
Cardo Scala Rider Packtalk BAT00007 Replacement Battery 3.7V 850mAh
0.09 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (153 units) -
-
Up to 21% offNew arrival
BatteryWeb
Telex PB24ND-TX Replacement Battery 3.7V 1800mAh
0.13 lb
Sale priceFrom $26.99 USD Regular price $33.99Unit priceIn stock (180 units) -
-
Up to 19% offNew arrival
BatteryWeb
Mackie FreePlay 7.4V Replacement Battery 6800mAh 2043880-00
0.96 lb
Sale priceFrom $66.99 USD Regular price $82.99Unit priceIn stock (84 units) -
-
Up to 20% offNew arrival
BatteryWeb
Mackie FreePlay Personal PA Replacement Battery 7.4V 5200mAh
0.94 lb
Sale priceFrom $60.99 USD Regular price $75.99Unit priceIn stock (171 units) -
-
Up to 21% offNew arrival
BatteryWeb
Sena SMH-5 Replacement Battery 3.7V 350mAh Li-Polymer
0.07 lb
Sale priceFrom $22.99 USD Regular price $28.99Unit priceIn stock (66 units) -
-
Up to 21% offNew arrival
BatteryWeb
Sony MDR-XB950N1 Replacement Battery 3.7V 1000mAh LIS1553
0.1 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (72 units) -
-
Up to 21% offNew arrival
BatteryWeb
Bang & Olufsen Beosound 2 Compatible Battery PA-BO12 3.7V
0.09 lb
Sale priceFrom $21.99 USD Regular price $27.99Unit priceIn stock (306 units) -
-
Up to 21% offNew arrival
BatteryWeb
Sony WH-1000XM3 Replacement Battery 3.7V 1000mAh SP624038
0.1 lb
Sale priceFrom $23.99 USD Regular price $29.99Unit priceIn stock (171 units) -
