JVC BN-VF808 Replacement Battery 7.4V 750mAh Li-ion
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
JVC BN-VF808 Replacement Battery 7.4V 750mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
JVC BN-VF808 Replacement Battery 7.4V 750mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
750mAh
JVC GR-D796 / GZ-HD40 Series — 7.4V Li-ion Replacement Battery (BN-VF808)
This is a 7.4V, 750mAh Li-ion replacement cell for the JVC BN-VF808 and BN-VF808U battery. It fits the GR-D796, GR-D750, GZ-HD40, GZ-HD40AC, and over 230 additional JVC MiniDV and HD camcorder models. Voltage and capacity match the original spec exactly.
- GR-D796 and GZ-HD40 series fit: These camcorders share the same 7.4V two-cell Li-ion voltage rail, the same physical latch connector, and the same BMS handshake protocol — which is why one battery covers both MiniDV and early HD bodies in this JVC lineup.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a GZ-HD40 body. The BMS accepted the cell without error, voltage held steady across the discharge curve, and the protection circuit tripped correctly at the low-voltage cutoff threshold.
- First-use charge cycle on camcorder body: Insert the battery and charge it fully through the camcorder body or JVC OEM charger before your first recording session. Some JVC BMS firmware needs one complete in-body charge cycle to calibrate the battery-remaining indicator accurately on screen.
Why the GR-D796 shows a dead battery indicator on a partially charged replacement cell
JVC's battery gauge maps remaining charge to a voltage-threshold table stored in the camcorder firmware. A new third-party cell has a slightly different discharge curve than the original, so the firmware reads the voltage and maps it to the wrong percentage tier. This usually presents as the indicator jumping from full to one bar without any middle steps. One full charge-discharge cycle from within the camera body re-anchors the threshold mapping and the indicator stabilises.
Camcorder cuts power abruptly during HD recording even with a charged battery
HD recording on the GZ-HD40 series pulls significantly more current than standard MiniDV playback — sensor readout, codec processing, and the optical image stabiliser all draw simultaneously. At peak load, if the BMS protection circuit sees a momentary voltage sag below its cutoff threshold, it shuts the cell down as a precaution. This is more common when the cell is cold or has been sitting discharged for weeks. Warm the camcorder to room temperature, charge the battery to full (4.2V per cell, 8.4V total), and the BMS cutoff will have adequate headroom to sustain the HD recording load.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: JVC
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My JVC GR-D796 shows "no battery" or doesn't recognise the new BN-VF808 replacement — what's happening?
JVC camcorders from this era perform a BMS handshake when a battery is inserted. If the cell hasn't completed a charge cycle yet, the handshake can fail and the body rejects it outright. Insert the battery, connect the OEM charger or charge via the camcorder's DC input, and let it run a full charge to 8.4V. One complete charge cycle is usually enough for the body to accept the cell.
The battery percentage on my GZ-HD40 jumps erratically — it shows full, then drops to one bar almost immediately. Is the cell faulty?
The cell itself is not necessarily at fault. JVC's remaining-charge display reads voltage thresholds and maps them to bar segments. A replacement cell's discharge curve doesn't always align perfectly with the firmware's stored voltage table on the first use. Run one full charge-discharge cycle through the camcorder body and the indicator will re-calibrate — after that, the bar progression should track the actual charge level smoothly.
The BN-VF808 replacement drains noticeably faster when I'm shooting in cold weather — is this a defect?
Cold temperatures reduce the ion mobility inside Li-ion cells, which directly lowers available capacity and raises internal resistance. At temperatures below 10°C, a 750mAh cell can deliver noticeably less usable charge before the BMS voltage cutoff triggers. Store the battery in an inside pocket to keep it near body temperature before shooting, and swap it into the camcorder just before recording. Capacity returns to normal once the cell warms back to room temperature.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

