JVC BN-VF815 Replacement Battery 7.4V 1500mAh Li-ion
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
JVC BN-VF815 Replacement Battery 7.4V 1500mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
JVC BN-VF815 Replacement Battery 7.4V 1500mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
1500mAh
JVC GR-D796 / GZ-HD40 Series — 7.4V Li-ion Replacement Battery (BN-VF815)
This 7.4V, 1500mAh Li-ion cell replaces the BN-VF815 and BN-VF915 OEM batteries used across the JVC GR-D and GZ-HD camcorder lines. It fits the GR-D796, GR-D750, GZ-HD40, GZ-HD40AC, and over 235 additional JVC camcorder models sharing the same battery bay and connector pinout. Capacity is 1500mAh (11.1Wh), matching the original spec.
- GR-D and GZ-HD platform compatibility: JVC's mid-2000s compact camcorder lines share a common battery interface — same 7.4V rail, same physical latch, and same BMS communication protocol — which is why a single cell covers both the GR-D and GZ-HD chassis without modification.
- Bench tested on actual hardware: We cycled this cell through the GR-D796 body and the OEM charger. The BMS accepted the cell on first contact, reported charge state correctly, and held voltage above 7.0V through the full discharge curve without triggering a premature cutoff.
- First-cycle initialisation on JVC camcorders: Run the first charge cycle through the camera body rather than a third-party charger. JVC's BMS reads cell impedance during that initial in-body charge to calibrate the battery-remaining display — skipping this step can cause the indicator to read inaccurately for several cycles.
Why the GR-D796 battery indicator jumps erratically during playback
JVC's battery-remaining display maps percentage to voltage thresholds calibrated against the original cell's discharge curve. A new Li-ion cell has a flatter mid-range discharge curve than an aged original, so the camera's firmware reads the voltage differently and can jump — often skipping from 60% to 20% without warning. This isn't a cell fault. After two or three full charge-discharge cycles in the camera body, the BMS re-maps to the new cell's curve and the indicator stabilises. If it still jumps after three cycles, verify the charger is bringing the cell to a full 8.4V before removing it.
GZ-HD40 showing "no battery" or refusing to power on with new cell installed
The GZ-HD40 runs a handshake check between the camera body and the battery's protection circuit on every power-on. If the cell arrives in a deep storage state — below roughly 6.0V — the body will reject it rather than attempt to charge it. The fix is to place the cell in the OEM JVC charger rather than the camera body first; the charger applies a low-current pre-charge that brings the cell back above the acceptance threshold. Once the charger shows a solid charge light, install the cell in the camera body and power on normally. Do not leave the cell in deep discharge storage for extended periods between uses.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: JVC
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My GR-D796 accepted the new battery once but now shows "no battery" every time I power it back on — what's happening?
This is the JVC BMS re-running its handshake check on every cold boot and failing because the cell voltage has dipped slightly between sessions. Remove the battery, place it in the OEM charger until the charge indicator confirms full, then reinsert it into the camera body and power on. Once the body completes a successful handshake at full voltage, it typically accepts the cell consistently on subsequent boots. If the issue persists, check that the battery contacts on both the cell and the camera bay are clean and making full contact — oxidation on mid-2000s JVC bodies is common.
Shot count is much lower than I expected — I'm barely getting through one event before the battery drains. Is the cell defective?
Probably not defective — continuous video recording on the GZ-HD40 and GR-D series pulls significantly more current than the spec shot count assumes, because it combines the image sensor, codec processor, LCD, and optical image stabilisation simultaneously. The 1500mAh rating reflects capacity under controlled discharge, not sustained HD video draw. Check whether the LCD brightness is set to maximum and whether image stabilisation is on — both add meaningful current draw. If the cell still drains faster than expected after two full charge cycles, charge it fully to 8.4V in the OEM charger and compare that cycle against the first.
The battery percentage on my GZ-HD40AC dropped from 80% to 15% in about two minutes of recording — then the camera shut off. What caused that?
That sharp drop is almost always a voltage sag event — sustained video recording pulls enough current that a cell which hasn't been fully conditioned can't hold its mid-range voltage, causing the camera's low-voltage cutoff to trigger well before the cell is truly empty. Run two full charge-discharge cycles through the camera body before heavy use. On the third cycle, check that the charger brings the cell to a solid 8.4V before you pull it — an undercharged cell will hit the cutoff threshold faster under load.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

