Kodak KLIC-7005 EasyShare C763 Replacement Battery 3.7V 850mAh

Kodak EasyShare C763 — 3.7V Li-ion Replacement Battery (KLIC-7005)

This is a 3.7V, 850mAh Li-ion cell built to the KLIC-7005 spec for the Kodak EasyShare C763 compact digital camera. It slots into the battery compartment in place of the original Kodak cell. Voltage, connector, and physical dimensions (40.20 × 35.30 × 6.10mm) match the OEM unit.

• EasyShare C763 fit: The C763 runs a single-cell 3.7V Li-ion system with a fixed connector orientation. This cell matches that voltage rail and connector, so the camera body accepts it without modification.
• Bench tested on actual hardware: We cycled this cell through the C763 body and a compatible external charger. The BMS completed charge termination cleanly and the camera powered on without a rejection warning on first insertion after a full charge.
• First-charge protocol on the C763: Charge this cell inside the camera body using the OEM AC adapter before your first shoot. Some C763 units need one full charge cycle through the body to calibrate the battery-remaining display to a new cell's discharge curve.

Dead battery indicator showing on a partially charged replacement cell

The C763 maps its battery indicator to a voltage-threshold table tuned for the original cell's discharge curve. A new third-party cell can sit at 3.85V and still trigger the dead-battery icon because the camera reads the resting voltage against the wrong point on that table. Running one full charge-to-discharge cycle inside the camera body resets this mapping. After that cycle, the indicator tracks the actual charge state correctly.

Battery percentage jumping erratically mid-shoot

If the percentage display skips — say, 60% to 20% in a few frames — the camera's voltage sampling is catching brief sag under flash-capacitor recharge load. The KLIC-7005 cell at 850mAh has limited headroom when the flash fires in quick succession, and the C763 interprets that sag as a steep capacity drop. Let the flash indicator confirm a full recycle between shots and the display stabilises. If the jumping persists from a full charge, check that the battery contacts in the door are clean and making full contact.