Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Lenovo IdeaPad S6000 Replacement Battery L11C2P32 3.7V

Up to 20% off
New arrival
Sale priceFrom $40.99 USD Regular price $50.99
Shipping calculated at checkout.
Fits Lenovo IdeaPad S6000, IdeaPad S6000F, IdeaPad S6000L, and IdeaTab B6000F models; replaces OEM part L11C2P32.
This 3.7V Li-Polymer cell delivers 6300mAh capacity for full tablet runtime on a single charge cycle.
Connector seats flush into the battery slot with no locking tab; orientation marked on the housing.
We ran a full discharge cycle on the IdeaPad S6000 platform; BMS accepted the cell without fault codes.
After installation, discharge the tablet fully to automatic shutoff then charge uninterrupted to 100% — this recalibrates the fuel gauge IC against the new cell and corrects inaccurate percentage display.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

6300mAh

Lenovo IdeaPad S6000 Series — 3.7V Li-Polymer Replacement Battery (L11C2P32)

This is a 3.7V, 6300mAh Li-Polymer replacement battery for the Lenovo IdeaPad S6000 tablet family. It fits the IdeaPad S6000, S6000F, S6000L, and IdeaTab B6000F, among others. OEM part number L11C2P32 confirms direct fitment to these models.

  • IdeaPad S6000 family compatibility: These models share the same 3.7V single-cell architecture, L11C2P32 connector pinout, and BMS handshake protocol — which is why one battery covers the full S6000 lineup without modification.
  • Bench tested on actual hardware: We cycled this battery through charge and discharge on the S6000 platform and confirmed the BMS accepts the cell, negotiates charge current correctly, and holds voltage above the low-battery cutoff threshold throughout the discharge curve.
  • Fuel gauge recalibration after swap: After fitting this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100% without using the tablet. This resets the fuel gauge IC against the new cell's actual capacity and clears the inaccurate percentage readings that appear after any cell replacement.

Why the IdeaPad S6000 shuts down at 15–25% after a battery swap

The S6000's fuel gauge IC was calibrated to the old cell's internal resistance profile. After a swap, it miscalculates the remaining charge and triggers a low-voltage shutdown early — typically between 15% and 25% displayed. This is not a fault in the new battery. The combined load of the display backlight and active WiFi pulls voltage down faster than the gauge expects, hitting the cutoff threshold before the cell is actually depleted. Run one full discharge-to-shutoff cycle followed by an uninterrupted full charge to recalibrate the IC to the new cell.

Fast charging unavailable after fitting L11C2P32

Some users find fast charge stops working after a battery replacement on the S6000 series. The charge IC requires at least one completed charge cycle before it re-negotiates the correct charge rate with the new cell. Plug in using the original charger and allow one full charge from near-zero to 100% without interruption. After that cycle, fast charge behaviour returns to normal. If it does not, verify the charger output — the S6000 requires a charger delivering at least 5V/2A to enable higher charge rates.

Compatible Models

IdeaPad S6000 IdeaPad S6000F IdeaPad S6000L IdeaTab B6000F IdeaTab S6000 IdeaTab S600H IdeaPad S6000H IdeaPad A10-70 IdeaPad A7600-F A7600

Replaces Part Numbers

L11C2P32

Technical Specifications

Voltage3.7V
Amp Hours6300mAh
Capacity6300mAh
Rate23.31Wh
Net Weight124g /4.37 oz
Gross Weight264g /9.31 oz
Approximate Weight264g /9.31 oz
Dimension 159.43 x 123.57 x 3.00mm

Product Highlights

  • Brand: Lenovo
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My IdeaPad S6000 shows 40% battery but the screen just goes black and it shuts off — is the new battery faulty?

The battery is not faulty. The fuel gauge IC on the S6000 is still calibrated to the old cell's resistance curve, so it triggers a low-voltage shutdown before the new cell is actually empty. Run the tablet down to automatic shutoff, then charge it uninterrupted to 100% with the screen off. That single full cycle re-anchors the fuel gauge to the new cell and the early shutdowns stop.

The percentage on my S6000 is jumping around after I replaced the battery — it reads 67%, I use it for a few minutes and it drops to 31%.

Erratic percentage readings after a cell swap are caused by the fuel gauge IC being calibrated to the old battery's charge curve — the new cell reports different voltage characteristics and the IC loses track. This is not a hardware fault. Do one full discharge to automatic shutoff followed by a single uninterrupted charge to 100%. The IC recalibrates against the new cell's actual voltage curve and percentage reporting stabilises.

Fast charging worked before I swapped the battery on my IdeaPad S6000, but now it only charges slowly — same charger, same cable.

After a cell replacement, the S6000's charge IC defaults to a conservative current until it completes one full accepted charge cycle with the new cell. Allow the tablet to charge from below 10% to 100% without interruption using the original charger. Once that cycle completes, the IC re-negotiates the correct charge rate. Confirm your charger outputs at least 5V/2A — anything below that will keep the tablet in slow-charge mode regardless of the battery.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.