Lenovo IdeaPad U470 Compatible Battery 11.1V 4900mAh L10C4P11
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Lenovo IdeaPad U470 Compatible Battery 11.1V 4900mAh L10C4P11 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Lenovo IdeaPad U470 Compatible Battery 11.1V 4900mAh L10C4P11 - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
4900mAh
Lenovo IdeaPad U470 — 11.1V Li-Polymer Replacement Battery (L10C4P11)
This 11.1V, 4900mAh Li-Polymer battery replaces the original cell in the Lenovo IdeaPad U470 ultrabook. It matches the OEM part numbers L10C4P11 and L10N6P11. Total rated capacity is 54.39Wh.
- IdeaPad U470 fitment: The U470 uses a slim Li-Polymer pack with a specific connector pinout and BMS communication line. This cell matches that connector and carries the correct EEPROM data so the BIOS recognises it without throwing an unknown-device flag on first boot.
- Bench tested on actual hardware: We ran this cell through a full charge and discharge cycle on the U470 platform. The BMS communicated correctly with the system board, charge current ramped as expected, and the protection circuit tripped cleanly at the low-voltage cutoff threshold.
- First-cycle calibration on the U470: After installation, run the laptop down until it hibernates on its own, then charge uninterrupted to 100% without interruption. This forces the BIOS battery learn cycle to reset against the new cell and clears the inaccurate health warning that appears after every cell swap on this platform.
Why the U470 BIOS reports poor battery health after a cell swap
The IdeaPad U470 stores battery health data in EEPROM on the battery's BMS board. When a new cell is installed, the BIOS reads residual cycle count and health flags from the old EEPROM profile and flags it as degraded. This is not a fault with the replacement cell. Running one full discharge-to-hibernate followed by an uninterrupted charge to 100% resets the learn cycle and brings the reported health figure into line with actual cell condition.
U470 shutting down at 20–30% charge shown on screen
This happens when the fuel gauge IC has not yet calibrated against the new cell's voltage curve. The gauge predicts shutdown based on the old cell's profile, so it calls low-voltage cutoff earlier than the actual state of charge. The fix is two to three full discharge and charge cycles — each time letting the laptop run down to hibernate naturally. After the third cycle, the fuel gauge recalibrates and the cutoff point aligns with the actual remaining charge at roughly 10.5V under load.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Lenovo
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My U470 shows the battery as "Unknown" or 0% right after I put the new one in — is the cell dead?
No. The BIOS is reading stale EEPROM data from the previous battery's BMS board and hasn't completed a learn cycle against the new cell yet. Plug in the charger, let it charge uninterrupted to 100%, then run the laptop down to hibernate on battery power alone. That single full cycle is usually enough for the BIOS to recognise the new cell and display a real percentage.
The U470 system info shows this battery as 41Wh but the spec says 54.39Wh — did I get the wrong battery?
You have the right battery. The Wh figure shown in system info is pulled from the EEPROM on the BMS board, which often carries the OEM's rated value rather than the actual cell chemistry capacity. The discrepancy is a reporting artefact, not a capacity loss. Run two full charge and discharge cycles and check the figure again — on some U470 units the BIOS updates the displayed value after the learn cycle completes.
New battery installed, charges fine, but the U470 cuts out unexpectedly when the screen brightness and CPU load are both high — what's happening?
Under combined CPU and display load, instantaneous current draw spikes and the cell voltage sags sharply. If the fuel gauge IC hasn't fully calibrated yet, it misreads that sag as a low-voltage fault and triggers an emergency shutdown. Run two full calibration cycles — discharge to hibernate, charge to 100% uninterrupted — so the fuel gauge learns the new cell's voltage-under-load profile. After calibration, the shutdown threshold will track the actual cell voltage rather than a misfired sag reading.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






