Panasonic P-P301 Cordless Phone Replacement Battery 3.6V 600mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Panasonic P-P301 Cordless Phone Replacement Battery 3.6V 600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Panasonic P-P301 Cordless Phone Replacement Battery 3.6V 600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.6V
Amp
600mAh
Panasonic KX-T3610 / KX-T3640 Series — 3.6V Ni-MH Replacement Battery (P-P301)
This 3.6V, 600mAh Ni-MH pack replaces the P-P301 battery in Panasonic cordless phone handsets. It fits the 3807, KX-T3610, KX-T3620, KX-T3640, and over 80 additional handset models that share the same voltage rail and connector footprint. Dimensions are 42.64 × 30.00 × 14.45mm — check these against your existing pack before ordering.
- KX-T3610 / KX-T3640 platform fit: These handsets share the same charging circuit, connector pinout, and 3.6V NiMH acceptance threshold. One battery revision covers the full range — the base station's charge controller sees no difference between models.
- Bench tested on actual hardware: We cycled this pack through charge and discharge on a KX-T3610 handset. The base station's charge indicator lit immediately, the BMS accepted the pack without error, and capacity stabilised at rated output by the fourth cycle.
- First-charge protocol for NiMH handsets: After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cordless phone batteries don't reach rated capacity from a standard quick top-up — the slow first charge is what sets the cell chemistry correctly.
Talk time shorter than original battery after replacement
NiMH cells ship in a partially discharged state and require three to five full charge-discharge cycles before reaching rated capacity. On cycle one, talk time will feel noticeably shorter than the original. This is normal cell conditioning, not a defect. Run the handset until the low-battery tone sounds, return it to the base for a full 16-hour charge, and repeat — capacity increases with each cycle until it stabilises at 600mAh.
Base station shows no charge light after swapping the battery
Panasonic base stations use a voltage-sensing circuit to confirm a valid pack is seated before enabling the charge LED. A NiMH cell that has self-discharged below roughly 3.0V during storage can fall under that acceptance threshold. If the charge light stays off, remove the handset, wait 10 seconds, and reseat it firmly — contact pressure matters. If the light still doesn't appear, the pack may need a trickle pre-charge: some third-party chargers can bring it up to 3.3V, at which point the base station will recognise it and take over.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Panasonic
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Panasonic handset is losing range — it worked fine on the old battery. What's going on?
NiMH cells that haven't completed their conditioning cycles show voltage sag under RF load. The transmitter in the KX-T3610 and similar handsets draws a burst of current each time it sends a signal, and an undercharged NiMH pack can't sustain the voltage — the radio backs off power to compensate, shrinking range. Run three to five full charge-discharge cycles first. After conditioning, the pack holds voltage steady under transmit load and range returns to normal.
The handset lost its pairing with the base after I replaced the battery. How do I get it back?
Removing power from a DECT handset can wipe the pairing registration stored in the handset's memory. This isn't a battery fault — it's how some Panasonic DECT models behave when the cell voltage drops to zero during a swap. To re-pair, press and hold the handset's page or locate button, then initiate registration from the base station menu. Check your model's manual for the exact key sequence — the KX-T3610 and KX-T3640 use a two-step base confirmation.
The battery drains completely overnight even when the handset is sitting in the base. What causes that?
This points to a seating issue rather than a battery fault. If the handset isn't making clean contact with the base charging pins, it draws from the battery in standby instead of receiving charge current from the base. Check that the contacts on both the handset and base are free of dust or oxidation — a quick wipe with a dry cloth often fixes it. Once the handset is properly seated, standby draw is handled by the base and the battery holds its charge overnight.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




