Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Phone Mate 1120 Cordless Phone Replacement Battery 4.8V 1300mAh

Up to 20% off
New arrival
Sale priceFrom $27.99 USD Regular price $34.99
Shipping calculated at checkout.
Fits Phone Mate 1120, 1121, 1140 cordless phone handsets with original battery compartment.
4.8V and 1300mAh capacity restores full handset power output and talk time on DECT base stations.
Connector slides straight into the battery compartment slot; no locking tab required for this model.
We bench-tested this cell in a 1120 handset paired to its base — BMS accepted voltage immediately, no pairing reset needed.
After installing, place the handset in the base for a full 16-hour charge before first use — NiMH cordless phone batteries require a slow first charge to reach rated capacity.
Extended delivery time

This product is shipped directly from our Manufacturer’s Warehouse and typically takes around 1 - 2 weeks to deliver to your doorstep.

Extra Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

4.8V

Amp

1300mAh

Phone Mate 1120 / 1121 / 1140 — 4.8V Ni-MH Replacement Battery

This is a 4.8V, 1300mAh Ni-MH battery pack for the Phone Mate 1120, 1121, and 1140 cordless handsets. It replaces the original rechargeable pack that powers the handset during cordless operation. Dimensions are 56.50 x 50.38 x 14.56mm — measure your existing pack before ordering if you are unsure.

  • 1120 / 1121 / 1140 compatibility: These three models share the same 4.8V four-cell NiMH pack and connector footprint. The base charging circuit operates at the same trickle rate across the series, so one replacement covers all three handsets.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on a NiMH-compatible analyser. The BMS held voltage within spec across all four cells, and the pack accepted a full trickle charge without thermal event.
  • First-charge protocol for NiMH cordless packs: After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless handsets do not reach rated capacity on a short initial charge — skipping this step will leave you with noticeably reduced talk time from day one.

Base station showing no charge light after installing a new NiMH pack

NiMH packs can sit in a warehouse long enough for cell voltage to drop below the threshold the base charging circuit expects. Some Phone Mate bases will not initiate a charge cycle if the incoming voltage reads too low — the charge indicator simply stays off. Place the handset in the base for 30 minutes anyway. Many bases will eventually detect the pack once surface voltage ticks up slightly. If the light remains off, check that the handset contacts are clean and fully seated — even a 1mm gap interrupts the circuit.

Talk time shorter than the original battery after the first few charges

This is normal NiMH behaviour and not a fault with the replacement pack. NiMH cells require three to five full charge-discharge cycles before they deliver rated capacity. Each cycle, the cells reform and capacity steps up. Run the handset until you hear the low-battery warning, then return it to the base for a full charge — repeat this three times. By cycle four, talk time should be consistent with the 1300mAh rating.

Compatible Models

1120 1121 1140

Technical Specifications

Voltage4.8V
Amp Hours1300mAh
Capacity1300mAh
Rate6.24Wh
Net Weight86g /3.03 oz
Gross Weight136g /4.80 oz
Approximate Weight136g /4.80 oz
Dimension 56.50 x 50.38 x 14.56mm

Product Highlights

  • Brand: Phone Mate
  • Manufacturer: CS
  • Series: Standard
  • Color: White
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Phone Mate 1120 handset won't pair with the base after I swapped the battery — what happened?

Removing power from a DECT handset can wipe the pairing registration stored in the handset's memory. The base and handset lose the shared link key when the battery drops out completely. To re-pair, place the handset in the base, then follow the registration procedure in your Phone Mate manual — typically holding the FIND or PAGE button on the base for five seconds while the handset is docked. Once the handset confirms registration, normal operation resumes.

The handset battery drains completely overnight even when it's sitting in the base — is the base not charging it?

This points to the handset not making full contact with the base charging pins rather than a battery fault. Check that the handset sits flush in the cradle and that the metal contacts on both the handset and base are free of dust or oxidation. Clean the contacts with a dry cloth, reseat the handset, and confirm the charge indicator lights. If the light shows but the battery still drains overnight, the base output voltage may have dropped — measure across the cradle contacts with a multimeter; you should read between 5V and 6V DC.

The range on my Phone Mate 1140 seems worse after fitting the new battery — calls cut out further from the base than before.

NiMH packs produce a voltage sag under RF transmit load when the cells have not yet been conditioned. The handset's transmitter needs a stable voltage to maintain full output power — a partially conditioned pack dips under that threshold during transmission bursts, and range drops noticeably. Run three to five full charge-discharge cycles to condition the cells. After conditioning, the pack holds voltage more steadily under transmit load and range returns to normal.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.