Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Samsung A10 Notebook 346C61A Replacement Battery 14.8V

Up to 20% off
New arrival
Sale priceFrom $83.99 USD Regular price $104.99
Shipping calculated at checkout.
Fits Samsung A10, VM8000, VM8100 notebooks; replaces OEM part numbers 346C61A, SSB-690L8-E, SSB-690LS/E, SSB690ELS/E, UN346C6, UN346C6-E1, UN346C6-T1, UN346C61A, UN346T1.
14.8V at 4400mAh delivers 65.12Wh capacity; sustains full CPU and display load without voltage sag.
Connector fits Samsung's proprietary dock slot with retention tab; orientation keyed to prevent reverse insertion.
We ran full discharge to hibernation cutoff on an A10 unit; BMS held stable 14.2V under sustained load, no early shutdown.
After installation, fully discharge the cell to hibernate cutoff, then charge uninterrupted to 100% — this resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after cell replacement.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.8V

Amp

4400mAh

Samsung A10 / VM8000 Series — 14.8V Li-ion Replacement Battery (346C61A)

This is a 14.8V, 4400mAh (65.12Wh) Li-ion replacement battery for the Samsung A10, VM8000, and VM8100 notebooks. It slots into the original battery bay and restores portable power when the factory cell no longer holds charge. Use OEM part numbers 346C61A, SSB-690L8-E, or SSB690ELS/E to confirm fitment against your existing battery label.

  • A10, VM8000, and VM8100 compatibility: These three models share the same 14.8V battery rail, physical form factor, and BMS communication protocol — a single cell revision covers all three without any adapter or modification.
  • Bench tested on actual hardware: We ran this cell through charge, discharge, and load cycles on the A10 platform. The BMS handshook correctly, charge current tapered as expected at full capacity, and no protection trips occurred under sustained CPU and display load.
  • Post-install calibration on Samsung A10: After fitting this battery, run one full discharge until the laptop hibernates on low-battery cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.

BIOS reporting poor battery health immediately after fitting a new cell

The Samsung A10 BIOS reads health data stored in the battery's EEPROM, not live cell chemistry. When a new cell arrives, the EEPROM values do not match the BIOS's logged charge history, so the system flags the battery as degraded even though the cell is new. Running one full discharge-to-hibernate followed by an uninterrupted charge to 100% forces the BIOS to rewrite its reference data against the new cell. After one or two completed cycles, the health indicator corrects itself without any firmware update.

Laptop shuts down hard at 20–30% battery shown on screen

This is a voltage cliff, not a capacity fault. When the CPU and display draw full load simultaneously, cell voltage drops sharply in the 20–30% state-of-charge window — faster than the fuel gauge IC can track. The BMS sees voltage fall below its cutoff threshold and trips before the OS gets a low-battery warning. The fix is calibration: discharge fully to hibernate cutoff, then charge to 100% in one uninterrupted session. This gives the fuel gauge IC accurate end-points to map against, and the premature shutdowns stop once the IC has two or three calibrated cycles logged.

Compatible Models

A10 VM8000 VM8100

Replaces Part Numbers

346C61A SSB-690L8-E SSB-690LS/E SSB690ELS/E UN346C6 UN346C6-E1 UN346C6-T1 UN346C61A UN346T1

Technical Specifications

Voltage14.8V
Amp Hours4400mAh
Capacity4400mAh
Rate65.12Wh
Gross Weight270g /9.52 oz
Approximate Weight270g /9.52 oz
Dimension 286.00 X 61.00 X 25.40mm

Product Highlights

  • Brand: Samsung
  • Manufacturer: CS
  • Series: Standard
  • Color: Light grey
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Samsung A10 shows the battery as "0%" or "unknown" right after I installed the new cell — is the battery dead?

The fuel gauge IC on the A10 loses its calibration reference when the cell is swapped, so it reports 0% or unknown until it has end-point data to work from. Discharge the laptop fully until it hibernates on the low-battery cutoff, then charge uninterrupted to 100%. The IC maps its curve against the new cell during that first full cycle, and the percentage reads correctly from that point forward.

Windows is showing this battery as 65Wh but the system info screen says a different Wh rating — which is right?

The Wh figure in system info is pulled from the EEPROM on the old battery's logged data, not the new cell. The physical rating of this replacement is 65.12Wh at 14.8V and 4400mAh — that is the authoritative spec. After one full calibration cycle, most Samsung BIOS versions update the reported Wh to match the new cell's EEPROM data. If the figure still looks wrong, check the battery detail screen in Windows Power Options, which reads live data rather than cached BIOS values.

The A10 charges to about 80% and then stops — is this a fault with the replacement battery?

This is almost always a BIOS-controlled charge limit, not a cell fault. Samsung notebooks on certain firmware revisions ship with a battery lifespan mode active that caps charge at 80% to reduce cell stress over time. Check Samsung Settings or Samsung Battery Manager in Windows — there is a toggle labelled "Maximum Battery Life" or similar that holds charge at 80%. Switch it to "Maximum Battery" mode and the charge ceiling lifts to 100%.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.