Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Samsung SLB-10A IT100 Replacement Battery 3.7V 1050mAh

Up to 21% off
New arrival
From $23.99 USD $29.99
Shipping calculated at checkout.
Fits Samsung IT100, SL620, PL60, ES55 and 52 additional models; replaces OEM part SLB-10A.
Delivers 3.7V and 1050mAh; supplies continuous power to sensor, processor, and display during capture.
Connector type is proprietary Samsung; seats into battery door slot with flat orientation and click-lock tab.
Bench test showed stable voltage delivery under flash load; BMS accepted charge cycle from camera body without fault codes.
On first use, run one full charge cycle through the camera body before extended shooting — Samsung camera firmware requires initial charge acceptance to display accurate battery-remaining percentage.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

3.7V

Amp

1050mAh

Samsung IT100 / SL620 / PL60 — 3.7V Li-ion Replacement Battery (SLB-10A)

This is a 3.7V, 1050mAh Li-ion cell built to the SLB-10A spec. It fits the Samsung IT100, SL620, PL60, ES55, and over 52 additional Samsung compact camera models. The cell slots into the same battery compartment as the OEM unit and connects via the same four-contact interface.

  • IT100 / SL620 / PL60 / ES55 platform: These models share the same compact body format, battery bay dimensions, and four-contact BMS interface. The SLB-10A footprint — 43.30 × 31.30 × 7.10mm — fits all of them without modification.
  • Bench tested on actual hardware: We ran this cell through a full charge and discharge cycle on an IT100 body. The BMS handshake completed on first insert, the battery indicator populated correctly, and the cell held voltage through sustained continuous shooting without dropping to the low-battery cutoff prematurely.
  • First-cycle acceptance on the IT100: Some Samsung compact bodies map the battery-remaining display against a charge cycle completed inside the camera body itself. Charge this cell in-camera or via an OEM-compatible external charger before your first shoot to let the BMS calibrate the indicator correctly.

Flash recycling current draw and cell voltage at end of charge

The IT100's built-in flash capacitor pulls a short high-current burst each time it recharges between shots. Early in a charge cycle this is not an issue, but as the cell discharges below roughly 3.5V, that recharge current causes a momentary voltage sag. The camera body reads the sag and may flag a low-battery warning even when capacity remains. This is a BMS threshold response, not a faulty cell. Slowing your shooting rate slightly at the tail end of a session gives the capacitor time to recharge without triggering the cutoff.

Battery percentage jumping erratically on the IT100 display

Samsung's compact camera firmware maps battery percentage against a discharge curve calibrated to the original OEM cell. A replacement cell with a slightly different discharge curve can cause the indicator to jump — showing 60%, then dropping to 20% within a few frames. The cell is not defective; the BMS voltage-to-percentage mapping just hasn't yet learned the new cell's curve. Run two full charge and discharge cycles in the camera body and the indicator typically stabilises. After the second cycle, the reading should track within a few percent of actual remaining capacity.

Compatible Models

IT100 SL620 PL60 ES55 M310W M110 P1000 L110 WB550 SL820 SL420 PL50 WB500 NV9 M100 P800 L100 HZ15W SL202 SL102 PL65 HZ10W L310W L200 L210 EX2F TL9 ES50 ES60 ES63 PL51 PL55 PL57 PL70 SL502 SL720 WB150 WB150F WB151 WB151F WB152F WB690 WB700 WB710 WB750 WB850 WB850F WB855F WB2100 WB800 WB800F WB250 WB250F WB200F WB201F WB280F

Replaces Part Numbers

SLB-10A

Technical Specifications

Voltage3.7V
Amp Hours1050mAh
Capacity1050mAh
Rate3.89Wh
Net Weight20.5g /0.72 oz
Gross Weight45.5g /1.60 oz
Approximate Weight45.5g /1.60 oz
Dimension 43.30 x 31.30 x 7.10mm

Product Highlights

  • Brand: Samsung
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Samsung IT100 shows a dead battery icon the moment I insert the new SLB-10A — is the cell dead on arrival?

Almost certainly not. Samsung compact camera bodies sometimes reject an unrecognised cell on first insert and display the dead battery icon before attempting a BMS handshake. Remove the cell, reinsert it, then power the camera on again — most bodies accept the cell on the second attempt. If the icon persists, place the cell in-camera and connect the USB charging cable for five minutes to let the BMS initialise from a known charge state.

My shot count with the new SLB-10A is noticeably lower than the original battery — what's happening?

Shot count figures are calculated under controlled lab conditions with flash disabled and display brightness at minimum. On the IT100, enabling flash, running continuous autofocus, and keeping the LCD at full brightness can each add significant draw well beyond the baseline spec. The cell capacity is 1050mAh — that number is fixed. Check your shooting mode first: switching from continuous AF to single-shot AF alone can recover a meaningful portion of the difference in shot count.

The IT100 body gets noticeably warm during extended video recording on the new battery — is that a cell issue?

The heat is coming from the camera body, not the cell. During video the IT100 runs the image sensor, processor, and image stabilisation simultaneously — a combined draw that generates heat in the body chassis regardless of which SLB-10A cell is installed. The cell itself should remain close to ambient temperature. If the cell is hot to the touch after a session, check that the battery bay contacts are clean and making full contact — a partial connection increases resistance and generates heat at the terminal.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Scubapro Sea Dragon 4500 Replacement Battery, 3.7V, 1050mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections