Samsung NP-530 Replacement Battery AA-PBYN4AB 7.4V 6000mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Samsung NP-530 Replacement Battery AA-PBYN4AB 7.4V 6000mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Samsung NP-530 Replacement Battery AA-PBYN4AB 7.4V 6000mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
6000mAh
Samsung NP-530 Series — 7.4V Li-Polymer Replacement Battery (AA-PBYN4AB)
This is a 7.4V, 6000mAh (44.4Wh) lithium-polymer replacement battery for Samsung NP-530 series notebook computers. It fits the NP-530U3B-A01, NP-530U3B-A02, NP-530U3B-A04, and over 57 additional NP-530 variants using OEM part numbers AA-PBYN4AB and AA-PLWN4AB. Swap it in when the original cell no longer holds charge or the laptop has stopped running on battery power.
- NP-530U3B platform fit: All NP-530U3B variants share the same 7.4V two-cell Li-Polymer pack architecture, the same 273.60 × 117.04 × 5.43mm footprint, and the same five-pin BMS connector. One SKU covers the full lineup because the battery management handshake and physical form factor are identical across every sub-model.
- Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on NP-530U3B hardware. The BMS communicated correctly with the Samsung EC firmware, charge current tapered properly at the top-of-charge threshold, and cell balance held within spec across multiple cycles.
- Post-install calibration on the NP-530: After fitting this battery, run a full discharge until the laptop hibernates, then charge uninterrupted to 100%. This single cycle resets the BIOS battery learn sequence on the NP-530 and clears the inaccurate health warning that appears whenever the original EEPROM data no longer matches the new cell's chemistry profile.
Why the NP-530 BIOS reports poor battery health after a cell swap
Samsung's EC firmware on the NP-530 reads cycle count, charge history, and rated capacity from the battery's EEPROM. When a new cell ships, that EEPROM contains factory defaults that do not match the usage history the BIOS expects from the installed pack. The firmware interprets the mismatch as a degraded cell and flags it as poor health. Running a full discharge-to-hibernate followed by a full uninterrupted charge gives the BIOS one complete learn cycle against real cell data and clears the warning. After two to three cycles the fuel gauge IC stabilises and health reporting returns to normal.
NP-530 shutting down at 20–30% remaining after battery replacement
This happens when the fuel gauge IC is still calibrated to the old cell's voltage curve. The new Li-Polymer cell has a steeper voltage cliff below roughly 3.5V per cell — the laptop's load controller hits that cliff before the displayed percentage reaches zero. The gauge reads 25% but the cell voltage has already dropped below the safe discharge threshold under combined CPU and display load. Fix this by running two full discharge-to-hibernate cycles back-to-back, allowing the fuel gauge IC to map the new cell's actual voltage-to-capacity curve. After calibration, shutdown at false percentages stops and the gauge tracks down to the correct 3.0V per-cell cutoff.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Samsung NP-530 BIOS shows the new battery as "0% available (plugged in, not charging)" — what's causing this?
The BIOS has locked charge because the EEPROM on the replacement cell contains factory-default data that the Samsung EC firmware doesn't recognise as a valid charge state. Shut the laptop down fully, remove the AC adapter for 60 seconds, then reconnect and power on. If the charge lock persists, enter the BIOS setup screen, let it sit for two minutes, then exit — this forces the EC to re-poll the battery and re-initialise the charge circuit. After the EC handshake completes, charge current resumes normally and the percentage begins climbing from its actual resting voltage.
The battery percentage jumps around wildly — showing 67%, then 45%, then 71% within minutes on the NP-530. Is the cell faulty?
The cell is not faulty — the fuel gauge IC is still running its algorithm against the old cell's stored capacity data. The NP-530's gauge IC needs at least two full charge-discharge cycles against the new 6000mAh Li-Polymer cell before it can plot an accurate voltage-to-percentage curve. Run two complete cycles: discharge to hibernate cutoff, then charge uninterrupted to 100% each time. Erratic percentage jumps stop once the gauge IC has enough real data points to interpolate the new cell's curve correctly.
Why does system information show the wrong Wh rating — 43Wh instead of 44.4Wh — for this replacement battery on the NP-530?
The Wh figure shown in Windows or Samsung's battery report is pulled from the EEPROM's rated design capacity field, which uses a slightly conservative factory value based on minimum cell spec rather than the actual measured capacity. The cell in this pack is rated at 44.4Wh; the EEPROM stores a rounded nominal figure that can read 0.5–1.5Wh lower depending on how the Samsung EC rounds the calculation. This
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






