Samsung NP530U4B 7.4V Replacement Battery AA-PBYN8AB 6100mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Samsung NP530U4B 7.4V Replacement Battery AA-PBYN8AB 6100mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Samsung NP530U4B 7.4V Replacement Battery AA-PBYN8AB 6100mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
6100mAh
Samsung NP530U4B Series — 7.4V Li-Polymer Replacement Battery (AA-PBYN8AB)
This 7.4V, 6100mAh lithium-polymer battery replaces the AA-PBYN8AB cell in Samsung's NP530U4B ultrabook line. It fits the NP530U4B, NP530U4B-A01US, 535U4C-S01, and BA43-00339A among others. Capacity is 45.14Wh — matched to the original cell spec.
- NP530U4B and 535U4C shared platform: These models run the same thin-chassis board layout and share an identical connector pinout, BMS handshake protocol, and 7.4V nominal rail. One replacement cell covers the full group without adapter changes.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the NP530U4B platform. The BMS communicated correctly over SMBus, charge termination triggered at the right cutoff, and the protection circuit responded normally to load transitions across the CPU and display together.
- Post-install calibration on the NP530U4B: After fitting this cell, run one full discharge down to hibernate-cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.
BIOS reporting poor battery health immediately after replacement
Samsung's BIOS reads health data stored in the old cell's EEPROM during every boot. When a new cell arrives, that EEPROM contains no matching cycle history, so the BIOS flags the battery as degraded or unknown. This is a firmware read issue, not a fault with the replacement cell. Run two complete discharge-to-hibernate and uninterrupted charge-to-100% cycles — the learn cycle rewrites the reference data and the warning clears.
Laptop shutting down at 20–30% shown on the gauge
This happens when the fuel gauge IC still holds calibration data from the degraded original cell. The percentage shown no longer maps accurately to the new cell's actual voltage curve. Under combined CPU and display load, the cell voltage drops faster than the gauge predicts, and the BMS triggers a hard cutoff before the reported percentage reaches zero. Run a full discharge to hibernate and a full uninterrupted charge twice — the fuel gauge IC recalibrates against the new cell and the shutdowns stop. Check system battery info after the second cycle; voltage at shutdown should now be at or below 6.4V rather than cutting early.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Samsung Battery Manager is showing the wrong Wh rating after I installed the replacement — it says something different from the original spec. Is the cell undersized?
The Wh figure shown in Samsung Battery Manager is pulled from the EEPROM data embedded in the cell, and the rated chemistry value written there can differ slightly from the actual measured capacity of a new cell. This is a data-reporting difference, not an undersized cell — the physical capacity is 45.14Wh as specified. Run a full discharge to hibernate-cutoff followed by a full uninterrupted charge, then check the reading again. After one calibration cycle the reported figure typically aligns closer to the actual cell rating.
The NP530U4B stopped charging above 80% after I swapped the battery — is the new cell defective?
On the NP530U4B platform, Samsung's BIOS includes a charge-limit setting that caps charging at 80% when Battery Life Extender mode is active. This is a firmware control, not a fault with the replacement cell. Open Samsung Settings or Samsung Battery Manager, locate the charge limit toggle, and set it to full charge mode. The cell will then charge to 100% normally on the next cycle.
Windows shows the battery as 0% or "plugged in, not charging" right after installing the new cell — what causes that?
The fuel gauge IC in the NP530U4B loses its reference point when the old cell is removed, and on first boot with a new cell it can report 0% or refuse to begin a charge cycle until it re-initialises. Disconnect the AC adapter, hold the power button for 15 seconds to clear residual board voltage, then reconnect AC and power on. The BMS handshake re-establishes over SMBus and the charge cycle starts — confirmed at boot by a rising percentage above 0%.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






