Shinelon T3TI Laptop Replacement Battery 14.4V 2200mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Shinelon T3TI Laptop Replacement Battery 14.4V 2200mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Shinelon T3TI Laptop Replacement Battery 14.4V 2200mAh - is backordered and will ship as soon as it is back in stock.
Voltage
14.4V
Amp
2200mAh
Shinelon T3TI / T3 Pro — 14.4V Li-ion Replacement Battery (6-87-NH50S-41C00)
This is a 14.4V, 2200mAh (31.68Wh) Li-ion replacement battery for the Shinelon T3TI and T3 Pro laptops. It slots into the same bay as the original Clevo-platform cell and uses OEM part numbers 6-87-NH50S-41C00 and NH50BAT-4. Install it when the existing pack no longer holds charge or the OS reports degraded health.
- T3TI and T3 Pro compatibility: Both models run on the same Clevo NH50 platform, sharing an identical battery bay, connector pinout, and BMS handshake protocol. One cell fits both without modification.
- Bench tested on actual hardware: We cycled this cell through charge, full discharge to BMS cutoff, and recharge on a T3TI unit. The BMS accepted the new pack without error flags, and the charge controller reached full 14.4V without throttling.
- First-cycle calibration on the T3TI: After installing, run one full discharge until the laptop hibernates at its low-voltage cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap.
BIOS reporting battery health as poor immediately after replacement
The Clevo NH50 BIOS reads health data stored in the battery pack's EEPROM. A new cell ships with factory EEPROM values that don't match the laptop's learned charge history, so the BIOS flags it as degraded or unknown. This is not a fault with the replacement cell. Run one full discharge-to-hibernate cycle followed by a complete uninterrupted charge. After two to three cycles, the BIOS recalibrates and the health warning clears.
Laptop shuts down at 20–30% charge shown on screen
This happens when the fuel gauge IC hasn't yet calibrated against the new cell's actual voltage curve. The OS reads an estimated state of charge, but the real cell voltage drops below the system's cutoff threshold before the display reaches 0%. The fix is a calibration cycle — let the laptop discharge fully until it hibernates, then charge to 100% without interruption. Repeat this two to three times until the shutdown point drops below 5% shown on screen.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Shinelon
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My T3TI shows the replacement battery as "0% available (plugged in, not charging)" — what's wrong?
The Clevo NH50 BMS occasionally fails to hand off correctly if the old pack was deeply discharged before removal. Connect the charger and leave the laptop off for 15 minutes — this lets the BMS pre-charge the cell to the minimum threshold before the system negotiates a full charge session. If the issue persists, remove the battery, hold the power button for 30 seconds to drain residual board power, then reinsert and connect the charger before powering on.
The system info panel shows a wrong Wh rating — it's listing something other than 31.68Wh. Is the battery faulty?
No. The Wh figure displayed in Windows or Linux system tools is read from the battery pack's EEPROM, which stores the manufacturer's rated capacity value. Different production batches of NH50BAT-4 cells can carry slightly different EEPROM entries even at the same nominal spec. The actual chemistry and voltage are correct at 14.4V Li-ion. The displayed Wh value normalises after the BIOS completes a learn cycle — run one full discharge to hibernate-cutoff and recharge to 100% to trigger it.
After two weeks of normal use, the fuel gauge is still jumping around — it'll show 60%, drop to 45%, then climb back. Is this a defective cell?
The fuel gauge IC on the Clevo NH50 platform needs several full charge-discharge cycles to map the new cell's voltage curve accurately. Erratic readings in the first one to three weeks are a calibration issue, not a cell defect. Run two more full discharge-to-hibernate cycles followed by uninterrupted charges to 100%. After the third calibration cycle, the gauge typically stabilises to within a 3–5% variance.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




