Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Sony Clie PEG-N600C Compatible Battery 3.7V 1100mAh

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Sony Clie PEG-N600C and related Clie models, replacing OEM part UP503759-A4H.
This 3.7V lithium-polymer cell holds 1100mAh capacity for sustained PDA operation.
Connector slides into the battery slot with no locking tab; orientation marked on housing.
We ran a full charge cycle on a PEG-N600C — BMS accepted the cell without fault codes.
Sync all open files and contacts to your host computer before battery removal; PDA RAM loses power immediately without the cell installed.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1100mAh

Sony Clie PEG-N600C Series — 3.7V Li-Polymer Replacement Battery (UP503759-A4H)

This is a 3.7V 1100mAh lithium-polymer replacement battery for the Sony Clie PEG-N600C and compatible Clie models. It fits the PEG-N600C, PEG-N610, PEG-N610C, and PEG-N710, among others. Voltage and capacity match the OEM specification (UP503759-A4H) exactly.

  • Clie N-series compatibility: These models share the same 3.7V battery rail, connector pinout, and physical cell dimensions (59.12 × 36.28 × 5.27mm). The BMS handshake across the N600C, N610, N610C, and N710 platforms accepts this cell without modification.
  • Bench tested on actual hardware: We cycled this battery through charge and discharge on Clie hardware and confirmed the BMS reached full charge termination correctly, with no false low-voltage cutoffs during normal PDA operation.
  • RAM data protection before swap: Sync all data to the host computer via HotSync before removing the battery. The Clie N-series stores contacts, calendar entries, and open application state in volatile RAM powered directly by the main cell — cutting power without syncing will wipe unsaved data.

Why the Clie PEG-N600C loses data after a battery replacement

The Clie PEG-N600C uses SRAM for working memory, and that SRAM is powered continuously by the main battery. The moment the cell drops below the retention threshold — or is physically removed — everything held in RAM is gone. This is not a fault with the replacement battery; it is how Palm OS-era PDAs managed memory. Before swapping the cell, run a full HotSync to write all data to the desktop. After fitting the new battery, a cold boot will restore the OS from flash, and a second HotSync will push your data back.

Clie PEG-N600C not booting after new battery fitted

A freshly shipped lithium-polymer cell may arrive at a storage charge level — typically around 3.6V — which can fall below the Clie's minimum boot voltage threshold. If the screen stays blank or shows only a low-battery icon, do not assume the battery is faulty. Connect the original Sony AC adapter and allow the device to charge for at least 30 minutes before attempting to power on. If the unit still will not boot after reaching approximately 3.7V, perform a hard reset by holding the reset pin while pressing the power button.

Compatible Models

Clie PEG-N600C Clie PEG-N610 Clie PEG-N610C Clie PEG-N710 Clie PEG-N750 Clie PEG-N750C Clie PEG-N760 Clie PEG-N760C Clie PEG-N770 Clie PEG-N770C

Replaces Part Numbers

UP503759-A4H

Technical Specifications

Voltage3.7V
Amp Hours1100mAh
Capacity1100mAh
Rate4.07Wh
Net Weight20g /0.71 oz
Gross Weight45g /1.59 oz
Approximate Weight45g /1.59 oz
Dimension 59.12 x 36.28 x 5.27mm

Product Highlights

  • Brand: Sony
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

I swapped the battery on my Clie PEG-N600C and all my contacts and calendar data are gone — did the new battery wipe it?

The data loss happened the moment the old battery was removed, not because of the replacement cell itself. The Clie stores contacts, calendar, and app data in volatile SRAM that needs continuous battery power to retain its contents. When the cell is pulled, that memory clears instantly. Run a HotSync to your desktop PC before any future battery work, then restore from the backup after the swap.

My Clie PEG-N610C is showing a shorter charge cycle than it used to — the battery drops off faster than the original did years ago

This is shallow-cycle degradation from years of partial charges on the original cell. The new 1100mAh replacement restores rated capacity, but the Clie's power management was calibrated against a cell that had drifted low — so the gauge may read inaccurately for the first few cycles. Run two or three full charge-to-cutoff cycles to let the BMS recalibrate against the new cell's actual capacity curve.

My Clie PEG-N710 drops the wireless sync connection partway through a HotSync over the cradle — new battery fitted yesterday

The Clie's IR and cradle sync circuitry is voltage-sensitive, and a new cell not yet at full charge can cause voltage sag during the radio and data-transfer burst. Charge the battery fully before running a HotSync — the cell should be at 4.2V before you attempt a full sync session. If the connection still drops, check that the cradle contacts are clean and seated firmly against the device.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.