TEAC R1 DAB Radio Replacement Battery BP-R1EU 7.2V 2000mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
TEAC R1 DAB Radio Replacement Battery BP-R1EU 7.2V 2000mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
TEAC R1 DAB Radio Replacement Battery BP-R1EU 7.2V 2000mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.2V
Amp
2000mAh
TEAC R1 / R2 Series — 7.2V Ni-MH Replacement Battery (BP-R1EU)
This is a 7.2V, 2000mAh Ni-MH replacement battery for the TEAC R1, R-1, R2, and R-2 portable DAB digital radios. It replaces OEM part numbers BP-R1EU, BP-R1, BP-R2, BP-R5, and BP-R12EU. When the original pack no longer holds a charge, this restores full portable operation to your DAB receiver.
- R1 / R2 platform compatibility: These models share the same battery bay dimensions, connector pinout, and 7.2V supply rail. The DAB decoder and RF front-end both draw from the same pack, so voltage and cell count must match exactly — this battery does.
- Bench tested on actual hardware: We cycled this pack through charge and discharge on a DAB receiver load. The BMS held voltage stable across both the RF stage and the digital decoder without dropout. Cell balance stayed consistent across multiple cycles.
- Station list recovery after swap: After fitting this battery, let the radio run a full auto-scan before manually selecting stations. DAB station lists are stored in volatile memory and are wiped on power loss — a complete scan rebuilds the full station index correctly.
Radio cutting out mid-station at low battery
The DAB decoder in the R1 and R2 requires a stable, uninterrupted voltage supply to decode the OFDM stream. When cell voltage sags below roughly 6.0V under load, the decoder loses sync and the audio drops out — this is a voltage floor issue, not a signal issue. A fresh, fully charged pack eliminates the sag. If cutouts persist with a new battery, check that the radio's battery contacts are clean and making firm contact with the pack terminals.
Reception noticeably worse than with the original battery
The RF front-end in a DAB radio draws more current when it's hunting for a weak multiplex signal. If the battery voltage is marginal, the radio can't sustain full RF output power and signal acquisition degrades. This appears as poor reception or frequent re-buffering even in areas where the radio previously performed well. Charge the new pack fully before testing reception — Ni-MH cells need at least one complete charge cycle to reach rated capacity.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: TEAC
- Manufacturer: CS
- Series: Standard
- Color: Blue
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My TEAC R1 lost all its saved stations after I swapped the battery — do I need to re-enter them manually?
No manual re-entry needed. DAB station lists are held in volatile memory, so any power interruption — including a battery swap — wipes them. Go to the radio's menu and run a full auto-scan (sometimes labelled "Auto Tune" or "Full Scan"). The radio will rebuild the complete station index from the current DAB multiplex signal, which takes a few minutes to complete.
The radio cuts out and restarts mid-broadcast, but only when the battery icon shows one bar — why?
The DAB decoder needs a steady voltage to maintain its OFDM lock on the broadcast stream. When the pack voltage sags below approximately 6.0V under the combined load of the RF stage and digital decoder, the stream sync breaks and the radio resets to recover it. A new, fully charged pack eliminates the sag. If the cutouts still happen with a charged battery, clean the battery bay contacts with a dry cloth — corrosion increases resistance and produces the same voltage drop under load.
Why does the new battery drain faster when I'm listening in areas with weak DAB signal?
In areas with a weak multiplex signal, the RF front-end continuously increases its search and acquisition power to lock onto the broadcast. That sustained high-current draw depletes the pack noticeably faster than normal listening conditions. This is normal Ni-MH behaviour under variable load — it's not a battery fault. For regular use in a known weak-signal location, keep a second charged pack on hand, or position the radio near a window to reduce the signal search load.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




