Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

XTOOL P52 Diagnostic Scanner Replacement Battery 7.4V 4000mAh

Up to 20% off
New arrival
Sale priceFrom $40.99 USD Regular price $50.99
Shipping calculated at checkout.
Fits XTOOL P52 diagnostic scanner, replacing OEM battery part number JW3970125-7.4-4000.
7.4V 4000mAh lithium-ion cell delivers full power to the scanner's processor and display subsystems.
Connector seats into the battery slot on the P52 chassis with single-point alignment and friction locking.
We tested the BMS on cold start — boot threshold cleared on first charge, no fault codes.
Export all saved vehicle profiles to your laptop before removing the old battery — the P52 stores active vehicle data in RAM powered only by this main cell.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.4V

Amp

4000mAh

XTOOL P52 — 7.4V Li-ion Replacement Battery (JW3970125-7.4-4000)

This 7.4V 4000mAh Li-ion battery is a direct replacement for the XTOOL P52 automotive diagnostic scanner. It fits the P52 specifically — a handheld OBD tool used by technicians for DTC reading, system scans, and live vehicle data. Capacity is 29.6Wh, matching the original specification.

  • P52 platform fit: The P52 uses a slim 7.90mm cell stack with a BMS that handshakes on the same voltage rail as the original JW3970125-7.4-4000. The connector orientation and cell dimensions (125.30 x 69.33 x 7.90mm) match the chassis bay without modification.
  • Bench tested on actual hardware: We ran this cell through the P52 boot sequence and full OBD session load. The BMS held stable voltage through CAN bus polling cycles and did not trip under the scanner's peak draw during module scans.
  • Data export before swap: Export all saved vehicle profiles and session logs before removing the battery. The P52 holds vehicle data in RAM backed by the main battery — cutting power without exporting first will erase stored profiles permanently.

Why the P52 won't boot after a battery swap

The P52 has a minimum boot threshold — if the replacement cell ships below that voltage, the scanner will not power on even after pressing the button. This is a BMS protection state, not a fault with the unit. Plug the scanner into its charger for at least 20 minutes before attempting to power on. Once the cell clears the boot threshold, the P52 will start normally.

Wireless connection dropping mid-diagnostic session

The P52's Bluetooth and Wi-Fi stack draws from the same cell that powers the display and processor. When battery voltage sags under combined load — particularly during active module scans — the wireless link drops before the battery indicator shows critical. This is voltage sag, not a defective radio. A fresh, fully charged cell resolves the sag. If drops persist on a charged battery, check that the scanner firmware is current, as older builds have less aggressive power arbitration.

Compatible Models

P52

Replaces Part Numbers

JW3970125-7.4-4000

Technical Specifications

Voltage7.4V
Amp Hours4000mAh
Capacity4000mAh
Rate29.6Wh
Net Weight139.2g /4.91 oz
Gross Weight174g /6.14 oz
Approximate Weight174g /6.14 oz
Dimension 125.30 x 69.33 x 7.90mm

Product Highlights

  • Brand: XTOOL
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My P52 scanner is completely dead after swapping in the new battery — nothing happens when I press the power button. What's wrong?

The replacement cell likely shipped at a storage voltage below the P52's minimum boot threshold. The scanner will not start if the cell hasn't cleared that floor, even if the battery is otherwise fine. Connect the P52 to its charger and leave it for 20–30 minutes before pressing power. Once the cell reaches approximately 7.0V or above, the scanner will boot normally.

I lost all my saved vehicle profiles after replacing the battery — is there any way to recover them?

No recovery is possible once the battery is removed. The P52 stores vehicle profiles and session data in RAM that is powered directly by the main battery — when the cell is disconnected, that data is gone. Before any future battery swap, go into the P52's data management menu and export all vehicle profiles to the SD card or connected device first.

The P52 screen starts dimming well before the battery indicator hits red — why does that happen?

The P52's display driver is voltage-sensitive and begins throttling backlight output as cell voltage drops, even while the fuel gauge still reads moderate charge. This is normal behaviour on a degraded original battery but should not occur on a fresh replacement at full charge. If dimming starts early on the new battery, run a full charge cycle — charge to 100% uninterrupted before use. If the issue continues, check that the charging cable and port are delivering consistent current rather than intermittent contact.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.