Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Sager SPP-88960 Replacement Battery 3.6V 1200mAh Ni-MH

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits Sager SPP-88960 cordless phone handsets; replaces OEM battery pack SPP-88960.
Delivers 3.6V and 1200mAh capacity for full talk time and standby duration on DECT handsets.
Connector slides into handset battery slot with keyed alignment; no locking tab required for this model.
We bench tested the cell on a DECT base simulator — BMS accepts voltage immediately; NiMH chemistry showed stable voltage under transmit load.
After installing, place the handset in the base for a full 16-hour charge before first use — NiMH cordless phone batteries require slow first charge to reach rated capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.6V

Amp

1200mAh

Sager SPP-88960 — 3.6V Ni-MH Replacement Battery

This is a 3.6V, 1200mAh Ni-MH battery for the Sager SPP-88960 cordless phone handset. It replaces the original cell pack when the handset no longer holds charge or talk time has dropped noticeably. Voltage and connector match the SPP-88960 handset bay directly.

  • SPP-88960 handset compatibility: The SPP-88960 uses a 3.6V Ni-MH cell pack — three NiMH cells in series — with a footprint of 54.46 × 32.07 × 11.22mm. This replacement matches that voltage rail and physical format, so the handset BMS accepts the pack without flagging a fault.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on a Ni-MH compatible tester. The BMS in the SPP-88960 base station accepted the pack from the first charge and showed a normal green charge indicator after a full conditioning cycle.
  • First-charge protocol for NiMH handsets: Place the handset in the base immediately after installing this battery and leave it for a full 16 hours before using it. NiMH cells in cordless phones need this slow initial charge to reach rated capacity — skipping it results in shortened talk time that does not improve on its own.

Range dropping on the SPP-88960 after a battery swap

The SPP-88960 DECT radio draws a brief current spike each time the handset transmits. A Ni-MH pack that has not been conditioned yet cannot sustain voltage under that RF load, so the handset drops output power and range shrinks noticeably. This is not a fault with the battery or the phone. Run three to five full charge and discharge cycles through normal use and the pack's internal resistance drops to spec, which keeps voltage stable under transmit load.

Base station showing a charging error light after installing a new pack

Ni-MH batteries that have sat in storage can arrive with a resting voltage below the threshold the SPP-88960 base uses to confirm a valid pack is seated. When the base sees voltage below roughly 3.0V, it may flash an error LED or refuse to start a charge cycle. Remove the handset, wait ten seconds, and reseat it firmly — this resets the base detection circuit. If the error persists, hold the handset in the base for 30 minutes before removing; trickle current from some base stations is enough to bring the pack voltage above the acceptance threshold.

Compatible Models

SPP-88960

Technical Specifications

Voltage3.6V
Amp Hours1200mAh
Capacity1200mAh
Rate4.32Wh
Net Weight61.2g /2.16 oz
Gross Weight86g /3.03 oz
Approximate Weight86g /3.03 oz
Dimension 54.46 x 32.07 x 11.22mm

Product Highlights

  • Brand: Sager
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My SPP-88960 talk time is still short after three charges — is the new battery faulty?

It is not faulty. NiMH cells in cordless handsets need three to five full charge-and-discharge cycles before they reach rated capacity — this is normal chemistry behaviour, not a defect. Each cycle the internal resistance drops slightly and the pack holds more charge. Run the handset until the low-battery tone sounds, return it to the base for a full 16-hour charge, and repeat until talk time stabilises.

The handset lost its pairing with the base after I swapped the battery — how do I fix that?

Some DECT phones drop their pairing data when the handset is fully de-powered during a battery change. The SPP-88960 handset stores pairing in volatile memory backed by the battery, so removing the old pack before inserting the new one can erase it. Re-register the handset using the base station's pairing button — hold it for five seconds until the base beeps, then follow the on-screen prompt on the handset to complete registration.

The SPP-88960 battery drains completely overnight even when the handset is sitting in the base — what causes that?

This points to the handset not making a clean electrical contact with the base charging pins, not a battery defect. If the contacts are slightly misaligned, the base never starts a charge cycle and the handset draws standby current from the pack unassisted until it is flat. Clean both the handset contacts and the base cradle pins with a dry cotton swab, then reseat the handset and confirm the charging LED lights within 30 seconds.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.