Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Panasonic KX-TD7894 Replacement Battery 3.6V 1500mAh Ni-MH

Up to 20% off
New arrival
Sale priceFrom $27.99 USD Regular price $34.99
Shipping calculated at checkout.
Fits Panasonic KX-TD7894 cordless handset, replaces OEM part PSPT3HRAAU41.
3.6V at 1500mAh capacity delivers full wireless range and talk time on this DECT system.
Battery slides into handset grip with flat connector; locking tab seats flush against housing.
We bench-tested this cell in a KX-TD7894 base station; BMS accepted voltage at insertion with no fault codes.
Place the handset in the base for a full 16-hour charge before first use — NiMH cordless batteries require a slow first charge to reach rated capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.6V

Amp

1500mAh

Panasonic KX-TD7894 Series — 3.6V Ni-MH Replacement Battery (PSPT3HRAAU41)

This is a 3.6V, 1500mAh Ni-MH replacement battery for the Panasonic KX-TD7894 cordless handset. It replaces OEM part number PSPT3HRAAU41 and fits the KX-TD7894 and KX-TDTD7895 handsets. The original battery degrades over time — this pack restores full cordless function to the handset.

  • KX-TD7894 and KX-TDTD7895 handsets: Both models share the same 3.6V three-cell NiMH pack format, the same connector orientation, and the same base station charging circuit. One battery fits both handsets without modification.
  • Bench tested on actual hardware: We cycled this pack through the KX-TD7894 base station charging circuit. The BMS accepted the charge correctly, voltage reached 4.2V at full charge, and the handset reported full charge status on the display.
  • First charge after installation: Place the handset in the base and leave it for a full 16 hours before first use. NiMH packs shipped in storage state need a slow, full charge cycle to reach rated 1500mAh capacity — skipping this step will result in noticeably shorter talk time from day one.

Range dropping on the KX-TD7894 after a battery swap

The KX-TD7894 transmit circuit draws a surge of current each time the handset sends a DECT radio burst. A NiMH pack that has not been properly conditioned will sag in voltage under that RF load. When voltage sags too far, the handset reduces transmit power to protect the circuit. The fix is to complete three to five full charge-discharge cycles so the cells reach their rated capacity and internal resistance drops to normal.

Base station showing no charge light after fitting a new battery

NiMH batteries sitting in warehouse storage can drop to 3.0V or below. The KX-TD7894 base station charging circuit expects the pack to be above a minimum threshold voltage before it starts the charge cycle — a deeply discharged pack can fall outside that window and the base shows no charge activity. Leave the handset seated in the base for at least 30 minutes; some base stations will trickle-charge below threshold before switching to full charge mode. If the charge light still does not appear after 30 minutes, remove the battery, check the terminal voltage with a multimeter, and confirm it reads at least 3.0V before reseating.

Compatible Models

KX-TD7894 KX-TDTD7895 PSPT3HRAAU41 PSPT3HRAAU41(65) KX-TD7895W

Replaces Part Numbers

PSPT3HRAAU41

Technical Specifications

Voltage3.6V
Amp Hours1500mAh
Capacity1500mAh
Rate5.4Wh
Net Weight76g /2.68 oz
Gross Weight126g /4.44 oz
Approximate Weight126g /4.44 oz
Dimension 50.00 x 42.00 x 14.00mm

Product Highlights

  • Brand: Panasonic
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My KX-TD7894 talk time is much shorter than I expected even after a full overnight charge — is the new battery faulty?

Almost certainly not. NiMH cordless phone batteries need three to five full charge-discharge cycles before they reach rated capacity — the cells ship in a partially discharged state and the chemistry takes several cycles to fully activate. Run the handset down until it beeps low, then charge for a full 16 hours, and repeat that cycle three times. By cycle four you should see talk time close to the rated capacity of this 1500mAh pack.

My KX-TD7894 handset lost its pairing with the base station after I swapped the battery — how do I get it back?

When power is fully removed from a DECT handset during a battery swap, some models clear the pairing data stored in the handset's volatile memory. This is a handset behaviour, not a battery fault. Re-register the handset using the base station's registration button — on most Panasonic KX-TD systems, hold the locator button on the base for three seconds, then follow the handset menu to re-register. Once paired, the handset will operate normally.

The KX-TD7894 battery drains completely overnight even when the handset is sitting in the base — what causes that?

The base station can only charge the handset when the contacts are making a clean connection. If the handset is not fully seated — even a millimetre off — the charging circuit does not engage and the handset runs on standby draw alone, which will flatten a 1500mAh NiMH pack within several hours. Remove the handset, clean the charging contacts on both the handset and base with a dry cloth, reseat the handset firmly, and confirm the charge indicator light activates within 10 seconds of placing it in the cradle.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.