Meister Craft MAS144 14.4V Li-ion Replacement Battery 3000mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Meister Craft MAS144 14.4V Li-ion Replacement Battery 3000mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Meister Craft MAS144 14.4V Li-ion Replacement Battery 3000mAh - is backordered and will ship as soon as it is back in stock.
Voltage
14.4V
Amp
3000mAh
Meister Craft MAS144 / MAS144VL — 14.4V Li-ion Replacement Battery (5451170)
This is a 14.4V 3000mAh Li-ion battery for Meister Craft cordless tools — specifically the MAS144, MAS144VL, and 5450880 models. It slots into the same port as the original pack and communicates with the same BMS handshake the charger expects. Capacity is 3000mAh (43.2Wh), matching the original specification.
- MAS144 and MAS144VL compatibility: Both models run on the same 14.4V rail and share the same connector pinout and BMS communication protocol. The 5450880 part number is the OEM battery these tools shipped with — this pack is built to the same electrical spec.
- Bench tested on actual hardware: We cycled this pack through motor-start inrush loads on a 14.4V drill platform. The BMS handled repeated trigger-pull current spikes without tripping into overcurrent cutoff, and cell voltage recovery between draws stayed within the expected window.
- First-use load conditioning: On first use, run the tool at half load for two cycles before any maximum-torque applications. This lets the BMS profile the motor's inrush current draw and calibrate overcurrent protection thresholds before you push it hard.
BMS cutoff on drill motor-start inrush surge
When you pull the trigger on a drill or impact driver, current spikes sharply in the first milliseconds before the motor reaches speed. A new pack — especially one coming out of storage — can have a stiff BMS that interprets this inrush as an overcurrent fault and shuts the pack down immediately. The fix is to run two or three short, low-load cycles first so the BMS accumulates inrush data and widens its fault threshold. After conditioning, the pack should sustain full trigger pulls without cutting out.
Charger not recognising the pack after extended storage
Li-ion packs stored for several months can drop below 2.5V per cell — the minimum voltage most chargers need to begin a charge cycle. If the charger blinks red or shows no activity, the pack has likely self-discharged past the charger's acceptance threshold. Some Meister Craft chargers have a recovery or "boost" mode — check the charger manual for a reset sequence, usually a long press or a specific light pattern. If cell voltage has dropped below 2.0V per cell, recovery is not possible and the pack should be replaced.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Meister Craft
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My MAS144 drill cuts out the instant I pull the trigger on a tough screw — why?
That's a BMS overcurrent trip, not a dead battery. The motor-start inrush current — the spike that happens in the first milliseconds before the motor spins up — exceeds the BMS fault threshold and shuts the pack down as a protection measure. It's more common on a new or recently stored pack because the BMS hasn't yet profiled the motor's draw. Run two short, low-load cycles first, then try full torque — the BMS adjusts its threshold after seeing real inrush data.
The tool bogs down and loses power halfway through a long drilling session — is it the battery?
This is voltage sag under sustained load, not a full cutoff. As cells heat up during extended use, internal resistance rises and the voltage rail drops — the tool loses torque even though the battery isn't empty. Check that the pack contacts are clean and seating firmly; high contact resistance makes sag worse. Let the pack cool for 10 minutes between heavy sessions to keep cell temperature below the point where resistance climbs sharply.
The MAS144 runs fine in summer but feels noticeably weaker in a cold garage — what's happening?
Li-ion internal resistance increases significantly below 5°C, which cuts the current the pack can deliver at its rated voltage. The tool doesn't get less power because the battery is failing — it gets less power because the cells are cold. Bring the pack indoors for 20–30 minutes before use, or keep it in a jacket pocket on the way to site. Once cell temperature is above 10°C, output returns to normal levels.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





