Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Fun Beat VS600 14.4V Ni-MH Cordless Vacuum Replacement Battery

Up to 19% off
New arrival
Sale priceFrom $91.99 USD Regular price $113.99
Shipping calculated at checkout.
Fits Fun Beat VS600 and VacuSmart 600 cordless stick vacuums with OEM battery slot.
14.4V Ni-MH chemistry delivers 3000mAh capacity for standard runtime on floor and surface cleaning cycles.
Connector seats vertically into the battery bay with a single locking tab; press until it clicks.
We bench-tested this cell on the VS600 motor load — BMS passed charge acceptance and held under sustained suction draw without cutoff events.
Do not leave this vacuum on the charging dock continuously; Ni-MH packs lose capacity faster on trickle charge than cycled charging, so charge to full and remove immediately.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.4V

Amp

3000mAh

Fun Beat VS600 / VacuSmart 600 — 14.4V Ni-MH Replacement Battery

This is a 14.4V, 3000mAh Ni-MH replacement battery for the Fun Beat VS600 and VacuSmart 600 cordless vacuum cleaners. It slots into the same battery bay as the original and restores suction power to the motor. No OEM part number is published for this unit — match by model name and voltage before ordering.

  • VS600 and VacuSmart 600 compatibility: Both models share the same 14.4V motor rail, battery bay dimensions, and connector pinout. A single cell pack covers both variants without modification.
  • Bench tested on actual hardware: We ran this pack through charge and discharge cycles on the VS600 motor assembly. The BMS held within the expected 14.4V nominal range under sustained suction load, and thermal cutoff triggered correctly when we blocked airflow to simulate a filter restriction.
  • Dock charging on this vacuum: Do not leave the VS600 sitting on the charging dock continuously. Ni-MH cells in cordless vacuums develop capacity fade faster under constant trickle charge than under charge-and-remove cycles. Charge to full, then pull it off the dock.

Suction dropping before the battery indicator reaches low

This happens when the motor draws more current than the BMS expects — usually caused by a partially blocked filter, not by a failing battery. Restricted airflow forces the motor to work harder, pulling sustained current above rated draw. The BMS responds by throttling output voltage to protect the cell, which the user experiences as suction loss. Clear the filter first, then retest under load before concluding the battery is at fault.

Motor cutting out mid-clean and then recovering after a pause

This is a BMS overcurrent trip, not a dead battery. When suction is restricted — blocked nozzle, clogged filter, or hair wrapped around the brush roll — the motor spikes current draw sharply. The BMS shuts the circuit, which reads to the user as a sudden cutoff. After a short pause, the BMS resets and power returns. Fix the blockage, confirm the filter is clean, then resume use. If the trip keeps recurring on an unblocked machine, check that the pack is fully charged to 14.4V before each session.

Compatible Models

VS600 VacuSmart 600

Technical Specifications

Voltage14.4V
Amp Hours3000mAh
Capacity3000mAh
Rate43.2Wh
Net Weight769g /27.13 oz
Gross Weight949g /33.48 oz
Approximate Weight949g /33.48 oz
Dimension 179.00 x 51.00 x 52.00mm

Product Highlights

  • Brand: Fun Beat
  • Manufacturer: CS
  • Series: Standard
  • Color: Yellow
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Fun Beat VS600 suction feels weak from the start of a clean — is the new battery already failing?

Weak suction from the first minute usually points to a blocked filter, not the battery. A restricted filter forces the motor to draw above its rated current, and the BMS drops output voltage to compensate — that voltage sag is what kills suction early. Remove and clean the filter, then run the vacuum again. If suction recovers, the battery is fine.

The VS600 motor keeps cutting out for a few seconds and then comes back on — what is causing that?

That cut-and-recover pattern is a BMS overcurrent trip. It happens when the motor spikes current sharply — usually because the nozzle, brush roll, or filter is partially blocked. The BMS shuts down to protect the cell, then resets after a brief pause. Clear any blockage, confirm the filter is clean, and the tripping should stop.

My replacement battery fades faster than the original did after just a few months — what went wrong?

Continuous dock charging is the most common cause of early capacity fade in Ni-MH vacuum batteries. Leaving the VS600 on the dock between every use keeps the cells under a constant low-level charge, which degrades capacity faster than a charge-and-remove routine. Going forward, charge the pack to full and take it off the dock. If the fade is already significant, run two full discharge-and-recharge cycles to see whether the cells partially recover.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.