Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Alta Calidad B10 3.7V Replacement Battery 1800mAh Li-ion

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Coolpad B10 smartphone; replaces OEM part number JLY15050100001.
3.7V, 1800mAh lithium-ion cell restores full charge cycles on aged B10 units showing degraded capacity.
Flat connector slides into battery slot with locking tab; orientation marked on device housing.
We ran a full discharge cycle on bench; BMS accepted charge without fault codes and held voltage under idle load.
On first use after installation, disable fast charging for one complete discharge-charge cycle — this recalibrates the fuel gauge IC to the new cell's discharge curve before high-current charging stresses an uncalibrated circuit.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1800mAh

Alta Calidad Coolpad B10 — 3.7V Li-ion Replacement Battery (JLY15050100001)

This is a 3.7V, 1800mAh Li-ion replacement battery for the Coolpad B10 smartphone. It fits the original battery slot and connects to the B10's charge IC using the same pin layout as the factory cell. Capacity is 1800mAh (6.66Wh), matching the OEM specification.

  • Coolpad B10 fit: The B10 uses a 3.7V single-cell Li-ion architecture with a dedicated fuel gauge IC that communicates charge state to the OS. This replacement cell matches the voltage profile and connector pinout that the B10's BMS expects.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a B10 unit. The BMS accepted the cell without error flags, and the charge IC reached full cutoff voltage at 4.2V as expected for this chemistry.
  • Fuel gauge recalibration on first use: On first use after installation, disable fast charging for one complete discharge-charge cycle. This lets the fuel gauge IC recalibrate against the new cell's discharge curve before high-current charging pushes current into an uncalibrated cell.

Why the B10 reports wrong battery percentage after a cell swap

The B10's fuel gauge IC builds a discharge model based on the old cell's impedance and capacity curve. When a new cell goes in, that model is still calibrated to the worn cell. The OS reads the coulomb counter data and displays percentages that don't match the actual state of charge. One full discharge down to auto-shutoff followed by an uninterrupted charge to 100% resets the reference points and brings the percentage display back into line.

Sudden shutdown at 20–30% on the replacement cell

This happens when the modem or display pulls a current spike and the cell voltage drops below the BMS low-voltage cutoff threshold — typically around 3.0V under load — even though the fuel gauge still shows charge remaining. A new cell with an uncalibrated fuel gauge IC is especially prone to this during the first few cycles. Run the phone through two full discharge-to-shutoff cycles without interruption. After those cycles, the coulomb counter recalibrates and the cutoff behaviour stabilises.

Compatible Models

B10

Replaces Part Numbers

JLY15050100001

Technical Specifications

Voltage3.7V
Amp Hours1800mAh
Capacity1800mAh
Rate6.66Wh
Net Weight36g /1.27 oz
Gross Weight61g /2.15 oz
Approximate Weight61g /2.15 oz
Dimension 70.65 x 59.80 x 4.10mm

Product Highlights

  • Brand: Alta Calidad
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Coolpad B10 won't power on at all after the replacement battery sat unused for a few months — what happened?

If a Li-ion cell drops below roughly 2.5V during storage, the BMS enters lockout mode to prevent unsafe recovery charging. Plug the B10 into a wall charger — not a PC USB port — and leave it for 20–30 minutes without pressing the power button. The charge IC on the B10 runs a trickle pre-charge sequence that slowly brings the cell voltage up to the threshold where the BMS will re-initialise. If the charge LED comes on and stays on, the cell is recovering; let it reach at least 3.6V before attempting to boot.

Fast charging stopped working on the Coolpad B10 after fitting this replacement battery — is something wrong?

On the first cycle after a cell swap, the B10's charge IC sometimes defaults to standard charging rather than accepting the fast charge handshake. This is the charge IC being cautious with an uncalibrated cell — it hasn't yet confirmed the cell can handle high current without voltage sag. Complete one full standard charge to 100%, then discharge normally and charge again. Fast charge protocol should reinitiate on the second or third cycle once the IC has logged the cell's impedance response.

The battery percentage on the Coolpad B10 jumps around erratically — it dropped from 60% to 15% in minutes. What causes that?

The fuel gauge IC on the B10 is still using the discharge model it built for the old, degraded cell. A fresh cell has lower internal impedance and a different voltage-versus-capacity curve, so the coulomb counter misreads state of charge and the percentage display becomes unreliable. Run one complete discharge cycle — use the phone normally until it shuts itself off — then charge uninterrupted to 100%. That single full cycle gives the fuel gauge IC enough data to rebuild an accurate model against the new cell's actual curve.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.