Apple iPad Air 2 Replacement Battery 3.8V 7300mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Apple iPad Air 2 Replacement Battery 3.8V 7300mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Apple iPad Air 2 Replacement Battery 3.8V 7300mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.8V
Amp
7300mAh
Apple iPad Air 2 / iPad 6 — 3.8V Li-Polymer Replacement Battery (A1547)
This 3.8V, 7300mAh lithium-polymer battery is a direct cell replacement for the Apple iPad Air 2 and iPad 6. It fits models A1566 and related variants across the WiFi and cellular configurations. Swap it in when the original cell no longer holds a useful charge or fails to power on at all.
- iPad Air 2 and iPad 6 platform fitment: Both generations share the A1547 cell format — same connector pinout, same BMS handshake voltage, and the same 186.50 × 130.00 × 3.50mm footprint inside the adhesive-bonded chassis.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on iPad Air 2 hardware. The BMS accepted charge negotiation on the first cycle, held voltage stable across display and WiFi combined load, and showed no thermal events through a full depletion run.
- Fuel gauge reset after installation: After fitting this cell, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. This gives the iPad's fuel gauge IC a calibration reference against the new cell and clears the inaccurate percentage display that almost always appears after a swap.
iPad Air 2 shutting down at 15–25% remaining after battery replacement
This happens because the fuel gauge IC is still calibrated to the old cell's voltage curve. The new cell hits a voltage cliff under combined display and WiFi load at a point the gauge hasn't mapped yet — so the iPad reads it as a hard cutoff. It's not a faulty cell. One full discharge-to-shutdown followed by an uninterrupted charge to 100% resets the reference. After that cycle, the gauge tracks the new cell's curve accurately and the early shutdowns stop.
Fast charging unavailable on iPad Air 2 after battery swap
The iPad's charge IC runs a USB-PD negotiation check on the first accepted charge cycle after a new cell is fitted. Until that cycle completes, the device may fall back to standard 5W charging and ignore higher-wattage adapters. Plug in a USB-PD charger and let it complete one uninterrupted charge from low to 100%. After that first full cycle, USB-PD negotiation re-establishes and fast charging becomes available again.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Apple
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My iPad Air 2 shows 80% battery but then dies without warning — is the new cell bad?
The cell itself is not the problem. The iPad's fuel gauge IC was calibrated to your old battery's voltage curve, and the new cell drops voltage at a different point under load — particularly when the display and WiFi are running together. The gauge reads that drop as a sudden cutoff rather than a gradual decline. Run one full discharge to automatic shutdown, then charge uninterrupted to 100%, and the gauge will remap against the new cell's curve.
The battery percentage on my iPad Air 2 is jumping around after I replaced the battery — it reads 60%, then suddenly 45%, then 70%.
Erratic percentage readings after a cell swap are caused by the fuel gauge IC using stored calibration data from the original battery. The new cell has a slightly different discharge curve, so the gauge misreads state-of-charge as it moves through voltage ranges it hasn't learned yet. One complete discharge-to-shutdown cycle followed by a full uninterrupted charge to 100% gives the IC a clean calibration reference. After that single cycle, the percentage display stabilises.
My iPad Air 2 feels warm while charging after fitting a new battery — should I be concerned?
Mild warmth during charging on a new cell is expected. The charge IC on the iPad runs at a slightly higher duty cycle on the first few charge cycles as it characterises the new cell's internal resistance and adjusts current delivery accordingly. We saw the same behaviour on the bench — surface temperature was within normal range and dropped after the first full cycle completed. If the device becomes hot to the touch or shows a temperature warning on screen, disconnect immediately and check that the battery connector is fully seated.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




