Samsung Galaxy Tab 5 EB-BT367ABA Compatible Battery 3.7V 3500mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Samsung Galaxy Tab 5 EB-BT367ABA Compatible Battery 3.7V 3500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Samsung Galaxy Tab 5 EB-BT367ABA Compatible Battery 3.7V 3500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
3500mAh
Samsung Galaxy Tab A 8.0 2017 — 3.7V Li-Polymer Replacement Battery (EB-BT367ABA)
This 3.7V, 3500mAh lithium-polymer cell replaces the original battery in the Samsung Galaxy Tab A 8.0 2017 and related variants, including TD-LTE and WiFi models. OEM part numbers EB-BT367ABA, EB-BT367ABE, and GH43-04539A all cross to this cell. Install it when the original no longer holds a charge or fails to power the tablet on.
- Galaxy Tab A 8.0 2017 platform fit: The WiFi, TD-LTE, and base Galaxy Tab A 8.0 2017 variants all share the same battery bay dimensions, connector pinout, and charge IC handshake — one cell covers the full lineup without modification.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a Galaxy Tab A 8.0 2017 unit. The BMS accepted the charge IC handshake cleanly on first connection, with no fault flags during either the constant-current or constant-voltage phase.
- Fuel gauge reset after installation: After fitting this battery, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without unplugging early. This single full cycle forces the fuel gauge IC to recalibrate against the new cell and clears inaccurate percentage readings that appear immediately after a swap.
Galaxy Tab A 8.0 shutting down at 15–25% remaining after battery replacement
This happens because the fuel gauge IC still holds calibration data from the old, degraded cell. The tablet interprets a voltage drop — caused by the combined load of the display and active WiFi — as a critically low state that triggers shutdown. The new cell actually has charge remaining at that point, but the gauge doesn't know it yet. One full discharge-to-shutoff followed by an uninterrupted charge to 100% resets the calibration and resolves the early cutoff.
Fast charging unavailable on Galaxy Tab A 8.0 after swapping the battery
Samsung's adaptive fast charge protocol requires the charge IC and battery to complete at least one full accepted charge cycle before the device enables higher charge rates. Immediately after a swap, the tablet defaults to standard 5V charging as a precaution. Plug in using the original Samsung charger and cable, let the tablet charge fully without interruption, and fast charge should activate on the following charge cycle. If it still doesn't appear, verify the cable supports USB 2.0 data lines — charge-only cables block the USB-PD negotiation handshake.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Galaxy Tab A 8.0 says 80% battery but shuts off immediately under load — is the new battery faulty?
The battery is not faulty. The fuel gauge IC calibrated itself to the worn-out original cell, so its voltage map no longer matches the new cell's discharge curve. Under the combined load of the display and WiFi, the tablet sees a voltage drop it incorrectly reads as empty and cuts power. Drain the tablet fully to automatic shutoff, then charge uninterrupted to 100% — the gauge recalibrates and the shutdowns stop.
The battery percentage on my Galaxy Tab A 8.0 is jumping around after replacement — it dropped from 60% to 30% in minutes without heavy use.
Erratic percentage jumps after a battery swap are a fuel gauge drift issue, not a defective cell. The Samsung fuel gauge IC stores a learned discharge profile from the old battery, and that profile doesn't match the new cell's actual voltage curve. The numbers will appear unstable until the IC recalibrates. Run one complete cycle — discharge to automatic shutoff, then charge to 100% without interruption — and the percentage should stabilise within ±3%.
The Galaxy Tab A 8.0 feels warm near the charging port while charging with the new battery — should I stop charging?
Warmth near the charging port during the first few charge cycles is normal when a new lithium-polymer cell goes through its initial charge IC negotiation. The charge controller runs in constant-current mode at a higher rate until it learns the new cell's internal resistance, which generates more heat than a broken-in battery produces. Surface temperature up to around 38–40°C is within spec. If the tablet becomes hot to the touch or shows a temperature warning on screen, disconnect and let it cool before resuming.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





