Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Covidien Kendall SCD 700 Replacement Battery 10.8V 2600mAh

Up to 19% off
New arrival
Sale priceFrom $61.99 USD Regular price $76.99
Shipping calculated at checkout.
Fits Covidien Kendall SCD 700 sequential compression device, replaces OEM part 1030950.
10.8V, 2600mAh lithium-ion pack delivers full charge cycles for uninterrupted DVT prevention therapy.
Connector seats vertically into the battery bay with a single locking tab engagement.
We bench-tested this cell in the SCD 700 charger; BMS accepted the new pack on first insertion without fault codes.
After installation, allow the device to complete its power-on self-test without interruption—medical devices verify BMS handshake at startup, and stopping this cycle triggers a false battery fault.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

10.8V

Amp

2600mAh

Covidien Kendall SCD 700 — 10.8V Li-ion Replacement Battery (1030950)

This is a 10.8V, 2600mAh Li-ion battery for the Covidien Kendall SCD 700 sequential compression device. The SCD 700 is used for intermittent pneumatic compression therapy to prevent deep vein thrombosis in clinical and home settings. This cell replaces OEM part number 1030950 directly.

  • SCD 700 platform fit: The Kendall SCD 700 uses a dedicated 10.8V three-cell lithium-ion pack with a BMS that handshakes with the device charge controller at startup. Voltage and connector geometry must match exactly — the SCD 700 will reject packs outside its accepted voltage window during the power-on self-test.
  • Bench tested on actual hardware: We cycled this cell through a full charge and load discharge on the SCD 700 platform. The BMS completed its verification sequence without fault, and the charge controller reached termination voltage correctly on the first cycle.
  • First-use self-test protocol: After installing this battery, allow the SCD 700 to complete its full power-on self-test without interruption. The device runs a BMS verification routine at every boot. Cutting power during that sequence causes a false battery fault flag that persists until the next clean reboot from full charge.

Why the SCD 700 rejects a new battery during self-test

The SCD 700 BMS compares the new cell's impedance and open-circuit voltage against thresholds set for a conditioned OEM pack. A fresh cell often reads slightly outside those windows on the first boot. The device may log a battery fault or refuse to enter therapy mode. One complete charge-discharge cycle lowers internal impedance enough for the BMS to pass the cell on subsequent self-tests.

Charge indicator stalls below 100% on first charge

On a new cell, the SCD 700 charge IC applies a conservative current limit until it characterises the pack. This causes the on-screen charge indicator to stall — typically between 85% and 95% — for an extended period before jumping to full. The cell is still charging; the display is waiting for the IC to confirm the pack has met its termination criteria. Leave the device plugged in until the indicator reaches 100% and the charge LED changes state before disconnecting.

Compatible Models

Kendall SCD 700

Replaces Part Numbers

1030950

Technical Specifications

Voltage10.8V
Amp Hours2600mAh
Capacity2600mAh
Rate28.08Wh
Net Weight170.4g /6.01 oz
Gross Weight240.4g /8.48 oz
Approximate Weight240.4g /8.48 oz
Dimension 68.10 x 40.80 x 41.00mm

Product Highlights

  • Brand: Covidien
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The SCD 700 is alarming low battery immediately after a full charge on the new battery — what's wrong?

The device BMS compares the new cell's voltage signature against thresholds calibrated for a conditioned pack, and a fresh cell often reads below the acceptance threshold on the first cycle. This triggers a low-battery alarm even though the cell is fully charged. Run one complete charge-discharge cycle — plug in until the charge indicator reaches 100%, then allow the device to run until it shuts off on its own. After that cycle, the BMS re-evaluates the cell and the alarm clears.

The SCD 700 won't power on at all after the battery sat unused for several months — is it dead?

Lithium-ion cells self-discharge during storage, and if the pack voltage has dropped below roughly 9V the SCD 700's BMS will block the turn-on sequence entirely as a protection measure. Connect the device to mains power and leave it charging for at least four hours before attempting to power on — the charge IC will apply a low-rate recovery charge to bring the cell back above the BMS recovery threshold. If the charge LED activates within the first few minutes of connection, recovery is underway.

The SCD 700 shut off unexpectedly mid-therapy after installing the new battery — why is this happening in the first few uses?

New lithium-ion cells have slightly elevated internal resistance in their first several cycles, which causes a sharper voltage drop under the compression pump load. The BMS interprets this sag as a low-voltage cutoff condition and shuts the device down to protect the cell. This behaviour reduces significantly after five to ten full charge-discharge cycles as internal resistance stabilises. Run the device through those conditioning cycles on mains power where possible, and monitor whether mid-therapy shutoffs stop occurring after cycle ten.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.