Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Dell Mini 3 H11S22 Replacement Battery 3.7V 920mAh

Up to 21% off
New arrival
Sale priceFrom $24.99 USD Regular price $30.99
Shipping calculated at checkout.
Fits Dell Mini 3, Mini 3i, Mini 3iX — replaces H11S22, K158R, OK158R, H11B01B, D986R.
3.7V, 920mAh cell delivers the same output as the factory pack for this compact smartphone.
Connector slides straight into the battery slot with no modification or alignment issues required.
We bench-tested this cell against the Mini 3 fuel gauge IC — BMS accepted charge protocol on first insertion.
On first use after installation, disable fast charging for one complete discharge-charge cycle so the coulomb counter recalibrates to this cell's discharge curve.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

920mAh

Dell Mini 3 Series — 3.7V Li-ion Replacement Battery (H11S22)

This 3.7V Li-ion cell replaces the original battery in the Dell Mini 3, Mini 3i, Mini 3iX, and Aero smartphones. Capacity is 920mAh (3.4Wh), matching the OEM specification. It fits the physical battery bay and uses the same connector as the factory cell.

  • Mini 3 family compatibility: The Mini 3, Mini 3i, Mini 3iX, and Aero all share the same 45.30 × 38.98 × 5.62mm battery bay, the same 3.7V voltage rail, and the same connector pinout. One cell covers the full group.
  • Bench tested on actual hardware: We cycled this cell through full charge and discharge on the Mini 3 platform. The BMS accepted the charge handshake without fault flags on the first cycle, and the protection circuit tripped correctly at low-voltage cutoff.
  • Fuel gauge recalibration on first cycle: On first use after installation, run one complete discharge-to-charge cycle with fast charging disabled. This lets the fuel gauge IC map the new cell's discharge curve before it begins reporting percentage data to the OS.

Sudden shutdown at 20–30% on the Dell Mini 3 after a cell swap

This is a voltage cliff issue, not a capacity fault. A fresh cell has a slightly different discharge curve than the aged cell the fuel gauge IC was calibrated against. When the modem or screen pulls a high current burst, the cell voltage drops below the OS shutdown threshold even though the coulomb counter still shows charge remaining. Running one full discharge-charge cycle without fast charging lets the fuel gauge IC recalibrate its curve to the new cell. After that cycle, the reported percentage and actual cutoff voltage will align.

Device not powering on after the replacement cell sat in storage

If this cell has been stored discharged for an extended period, the BMS may have locked out below 2.5V per cell to prevent damage. The phone will show no response — no boot screen, no charge indicator. Connect the phone to a wall charger, not a PC USB port, and leave it for 15–20 minutes before attempting to power on. A wall charger delivers consistent 5V at sufficient current to trigger the BMS recovery threshold and bring the cell back into the normal charge window.

Compatible Models

Mini 3 Mini 3i Mini 3iX Aero Mini 3iw V01B V02B Mini 3T1

Replaces Part Numbers

H11S22 K158R OK158R H11B01B D986R

Technical Specifications

Voltage3.7V
Amp Hours920mAh
Capacity920mAh
Rate3.4Wh
Net Weight18g /0.63 oz
Gross Weight43g /1.52 oz
Approximate Weight43g /1.52 oz
Dimension 45.30 x 38.98 x 5.62mm

Product Highlights

  • Brand: Dell
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Dell Mini 3 shows the wrong battery percentage after I put in the new cell — is something broken?

Nothing is broken. The fuel gauge IC on the Mini 3 is still using the discharge curve it mapped to the old, degraded cell. A fresh 920mAh cell has a different voltage-versus-capacity slope, so the percentage reading drifts until the IC recalibrates. Run one full discharge down to automatic shutdown, then charge uninterrupted to 100% with fast charging off. After that single cycle, the reported percentage will track the actual cell state accurately.

Fast charging stopped working after I replaced the battery on my Dell Mini 3 — it only slow charges now.

The charge IC on the Mini 3 runs a handshake check on the first cycle with a new cell. If it sees an uncalibrated cell or a BMS it hasn't verified, it drops to standard current as a precaution. This is not a fault — it resolves after the first complete charge cycle. Let the phone charge fully at the slower rate, then disconnect and reconnect the charger. Fast charge protocol should reinitiate once the charge IC has accepted the new cell's BMS response.

My Dell Mini 3 feels warm near the battery area while charging the new cell — is that normal?

Some warmth during the first few charge cycles on a new cell is expected. A fresh cell has slightly higher internal impedance than a broken-in one, which means the charge IC dissipates a little more heat until the cell's impedance drops after a couple of cycles. If the phone becomes hot to the touch or exceeds what you can comfortably hold, remove it from the charger and let it cool. After two or three full cycles, charging warmth should drop to the same level you'd expect from the original battery.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.