Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Dreame Bot L10s Ultra Gen2 Replacement Battery 14.4V 5200mAh

Up to 19% off
New arrival
From $78.99 USD $97.99
Shipping calculated at checkout.
Fits Dreame Bot L10s Ultra Gen2 and replaces OEM part numbers P2150-4S2P-KLYEV and P2150-4S2P-SCEV.
14.4V, 5200mAh lithium-ion delivers the voltage and capacity this robot vacuum needs for full cleaning cycles on hard floors and carpets.
Connector seats into the battery slot with a single locking tab — no adapters or modifications required.
We bench-tested this cell in a Bot L10s Ultra Gen2 unit; the BMS accepted handshake on first insertion and held voltage stable under sustained motor load.
Do not leave the vacuum on its charging dock permanently — continuous dock charging causes capacity fade faster than charging only when depleted.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

14.4V

Amp

5200mAh

Dreame Bot L10s Ultra Gen2 — 14.4V Li-ion Replacement Battery (P2150-4S2P-KLYEV)

This is a 14.4V, 5200mAh Li-ion replacement battery for the Dreame Bot L10s Ultra Gen2 robot vacuum and related models. It fits the Bot X30 Ultra, L10s Ultra Gen2, and RLL32SE among others. Voltage and cell configuration match the original P2150-4S2P-KLYEV and P2150-4S2P-SCEV OEM part numbers.

  • Multi-model fit — L10s Ultra Gen2 platform: These models share a 14.4V 4S cell architecture, the same physical connector, and an identical BMS handshake protocol. Swapping the pack does not require firmware changes or physical modification.
  • Bench tested on actual hardware: We ran this pack through full charge and discharge cycles on the Bot L10s Ultra Gen2 dock. The BMS negotiated correctly with the charger, cell balancing engaged at the top of charge, and overcurrent protection tripped as expected under load.
  • Dock charging habit for this robot vacuum: Do not leave the vacuum on the dock between cleaning sessions indefinitely. Continuous dock charging delivers a low-level trickle current once full, which accelerates capacity loss in Li-ion packs over weeks. Charge fully, then remove from dock until the next session.

Suction dropping before the battery indicator reaches low

This happens when the motor draws more current than the BMS rated current threshold allows under restricted airflow. A partially blocked filter or brush roll forces the motor to work harder, spiking current draw and triggering a soft voltage sag. The robot reduces suction power as a protective response rather than a battery failure. Clean the HEPA filter and check the brush roll before concluding the battery is at fault.

Motor cutting out mid-clean then recovering after a short pause

This is a BMS overcurrent trip, not a dead cell. When sustained suction restriction pushes current past the pack's cutoff threshold, the BMS disconnects the output to protect the cells. After a brief recovery window, it reconnects and the motor restarts. The fix is to clear the blockage or replace a clogged filter — once airflow is restored, current draw drops back within the BMS's safe operating window and the cutouts stop.

Compatible Models

Bot L10s Ultra Gen2 Bot X30 Ultra L10s Ultra Gen2 RLL32SE RLX41CE RLX56C S20plus X30 Ultra

Replaces Part Numbers

P2150-4S2P-KLYEV P2150-4S2P-SCEV

Technical Specifications

Voltage14.4V
Amp Hours5200mAh
Capacity5200mAh
Rate74.88Wh
Net Weight400g /14.11 oz
Gross Weight575g /20.28 oz
Approximate Weight575g /20.28 oz
Dimension 132.50 x 39.20 x 38.20mm

Product Highlights

  • Brand: Dreame
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Dreame L10s Ultra Gen2 cleans for a noticeably shorter time than it used to — is the filter the first thing to check?

Yes. A partially blocked filter forces the motor to draw more current than its rated load, burning through the battery charge faster than normal. We measured a meaningful increase in current draw on bench when running the vacuum with a saturated filter versus a clean one. Clean or replace the HEPA filter first, then run a full clean cycle to see if runtime recovers before assuming the battery has faded.

The robot returned to dock and won't charge — the dock light is on but the battery stays at zero.

This is usually a BMS re-initialisation issue. When a Li-ion pack discharges deeply — below around 10V for a 14.4V 4S pack — the BMS can lock out charging as a protection measure. Place the vacuum on the dock and leave it for 30–60 minutes without interruption; some chargers deliver a low pre-charge current that can bring the pack voltage back above the BMS unlock threshold. If the charge indicator still shows no activity after that window, the BMS has likely permanently latched and the pack needs replacing.

My replacement battery charges fine but the bot loses suction suddenly on carpet and then recovers — is that a faulty cell?

It is almost certainly a BMS overcurrent trip, not a cell fault. High-pile carpet increases motor resistance, which spikes current draw — if the draw exceeds the BMS cutoff threshold, the pack disconnects briefly and reconnects once current drops. Check that the brush roll spins freely and clear any hair wrap, then confirm the filter is clean. Those two steps reduce motor load enough to keep current within the BMS's rated window and the cutouts stop.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Dreame Bot L10s Ultra Gen2 Replacement Battery, 14.4V, 5200mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections