Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Ecovacs Deebot T8 Compatible Battery 14.4V 5200mAh

Up to 19% off
New arrival
From $80.99 USD $99.99
Shipping calculated at checkout.
Fits Ecovacs Deebot T8, T8AIVI, T8+, T8 Aivi, and 66+ variants using S10-Li-144-5200 or 201-1913-4201 pack.
This 14.4V 5200mAh cell delivers 74.88Wh to sustain motor torque on carpet and hard floors.
Connector slides into the battery bay with a positive locking tab; orientation is keyed to prevent misinstall.
We charged this pack on a Deebot dock and confirmed the BMS accepted the handshake without fault codes.
Do not leave the vacuum on its charging dock continuously after full charge — trickle current degrades capacity faster than removing and charging only when depleted.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

14.4V

Amp

5200mAh

Ecovacs Deebot T8 Series — 14.4V Li-ion Replacement Battery (S10-Li-144-5200)

This is a 14.4V 5200mAh Li-ion replacement battery pack for the Ecovacs Deebot T8 robotic vacuum range. It fits the T8, T8+, T8AIVI, and T8 Aivi Max Power, among others. When the original cell degrades and the robot cuts cleaning cycles short or fails to dock correctly, this unit restores full operating voltage to the drive motors and suction system.

  • T8 platform compatibility: The T8 series robots share a common 14.4V architecture and the same physical battery bay across variants including the T8+ and T8AIVI. The connector pinout and BMS communication protocol are identical across these models, so one battery cell covers the full range without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a T8 platform and confirmed the BMS handshake completed correctly at startup. The protection circuit responded to overcurrent conditions as expected and voltage held steady across both drive motor and suction motor load.
  • Dock charging behaviour on the T8: The T8 returns to its dock between sessions and will trickle charge continuously if left there. Remove the robot from the dock once charging is complete. Leaving it permanently docked accelerates cell degradation faster than regular charge-and-discharge cycling does.

Suction dropping before the battery indicator reaches low

A degraded cell loses voltage under motor load well before the state-of-charge display reflects it. The T8's suction motor draws peak current on carpet and through partially blocked filters, and a weak cell sags below the BMS threshold before the indicator catches up. The robot then reduces suction output to protect the circuit rather than showing a low-battery warning. If suction performance drops mid-cycle but the battery indicator reads 50% or above, the cell's internal resistance is the cause — not a software or filter issue.

Robot cuts out completely and recovers after sitting idle

This is a BMS overcurrent trip, not a power failure. When the suction path is restricted — blocked filter, tangled brush roll, or dense carpet pile — the motor draws sustained current above the BMS overcurrent threshold and the circuit opens to protect the cell. The robot appears dead for 30 to 60 seconds, then recovers once the BMS resets. Clean the filter and check the brush roll before concluding the battery is faulty. If trips continue after clearing restrictions, check that battery output voltage under load holds above 12.5V.

Compatible Models

Deebot T8 T8AIVI T8+ T8 Aivi Max Power DLX11-21/61 DBX11-11/21 Deebot T8+ Deebot T8 Aivi Max Power T5 T8 N5 DJ65 DX33 DX53 DX55 T8 AIVI O950 Deebot Ozmo 9er Deebot Ozmo 950 DX9GDeebot Ozmo T8 Ozmo T8 Ozmo T8 AIVI DBX11-11 Ozmo T8+ DLX11-54 Deebot T9 Deebot T9 AIVI O920 O750 N5S N7 Deebot T9+ Deebot Ozmo 920 Deebot Ozmo 950 Deebot Ozmo T8+ Deebot Ozmo T8 AIVI Ozmo 950 DX9G Ozmo T8 AIVI DBX11-11 Ozmo T8+ DLX11-54 T9 T9+ T9 AIVI X1 TURBO T10 X1 Plus T10 PLUS X1 OMNI T10 TURBO T10 OMNI T20 OMNI N10 N10 PLUS T20e OMNI N20 N20 PRO N20 PLUS N20 PRO PLUS N20 COMBO T30S COMBO T30 OMNI T30 PRO OMNI T30S OMNI N20e N20e Plus N30 PRO OMNI N30 OMNI N30 MAX PLUS Deebot N20e Deebot N30 Pro Omin N30PROOMNI Deebot N30 Omin

Replaces Part Numbers

S10-Li-144-5200 201-1913-4201 S10-Li-144-6800 201-1913-4200 201-1913-420 10002644 201-2102-24Q5 201-2353-1097

Technical Specifications

Voltage14.4V
Amp Hours5200mAh
Capacity5200mAh
Rate74.88Wh
Net Weight369.2g /13.02 oz
Gross Weight549.2g /19.37 oz
Approximate Weight549.2g /19.37 oz
Dimension 137.00 x 50.50 x 37.25mm

Product Highlights

  • Brand: Ecovacs
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Deebot T8 keeps returning to dock mid-clean even with a new battery — what's causing that?

A partially blocked filter forces the suction motor to draw more current than rated, which pushes the new cell's BMS to trip early and triggers a dock return. Remove and clean the filter completely, then run a full cycle. If the robot completes a full clean without docking early, the filter was the cause, not the battery.

The T8 ran fine for six months and now barely covers half the floor — is this normal fade or something else?

Six months of continuous dock charging — where the robot sits plugged in between every short session — compresses cell capacity significantly faster than cycling does. Trickle charge damage builds up across hundreds of shallow cycles and looks identical to normal age-related fade. Pull the robot off the dock after each full charge and only return it when depleted. If capacity doesn't recover across a few full cycles, the original cell needs replacing.

Replacement battery installed but the T8 won't start charging on the dock — charge light just flashes and stops.

The T8's charging circuit expects a BMS handshake from the battery before it commits to a charge cycle — a flashing then stopping charge light usually means the BMS hasn't initialised. Press and hold the power button for 10 seconds to force a hard reset, then place the robot on the dock again. If the dock contact pins are clean and the battery is seated fully, the charge cycle should initiate and the indicator should show a steady charging state within 60 seconds.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Yeedi Vac Robot Vacuum Replacement Battery, 14.4V, 5200mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections