Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME10
BatteryWeb

Eufy L50 Replacement Battery 14.4V 2600mAh AK330

Up to 19% off
New arrival
Sale priceFrom $45.99 USD Regular price $56.99
Shipping calculated at checkout.
Fits Eufy L50 cordless vacuum and replaces OEM part number AK330.
14.4V and 2600mAh capacity restore full motor power and cleaning cycles on the L50 platform.
Connector slides into the vertical slot with a single locking tab — orientation is keyed.
We bench-tested this cell in an L50 unit; BMS accepted the pack on first insertion with no fault handshake delay.
Do not leave this battery on the charging dock continuously — trickle charge degrades capacity faster than charge-and-remove cycles.
Extended delivery time

Available by SPECIAL ORDER. Delivery for this product typically takes 2 weeks.

Extra Discount: As a thank you for your patience, enjoy an extra 5% off your order
EXTRAOFF

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.4V

Amp

2600mAh

Eufy L50 / L60 Series — 14.4V Li-ion Replacement Battery (AK330)

This is a 14.4V 2600mAh Li-ion replacement battery for the Eufy L50 and L60 series cordless stick vacuums. It fits models T2265, L60 SES, and additional variants sharing the AK330 form factor. Voltage and connector match the original cell exactly.

  • L50 and L60 platform compatibility: These models share the same 14.4V battery rail, connector pinout, and BMS handshake protocol. A single cell revision covers both generations — Eufy did not change the battery interface between them.
  • Bench tested on actual hardware: We cycled this cell through full charge and discharge on the L50 motor platform. The BMS held within spec voltage limits under sustained suction load and discharged cleanly to the cutoff threshold without spurious trips.
  • Dock charging habit for L50 and L60: Do not leave the vacuum sitting on the charging dock continuously. These vacuums trickle charge when docked at full capacity, which accelerates cell degradation. Charge to full, then remove from the dock until the next use.

Suction dropping before the battery indicator reaches low

The L50 motor draws more current when airflow is restricted — a partially clogged filter forces the motor to work harder, pulling the cell voltage down earlier than the indicator reflects. The indicator reads state of charge, not load-adjusted voltage, so it can show two bars while the motor is already voltage-starved. Clean the filter before assuming the battery is at fault. If suction recovers after a filter clean, the cell is not the issue.

Motor cuts out mid-session then comes back on

This is a BMS overcurrent trip, not a dead battery. When the L50 is run on thick carpet or encounters a sustained blockage, the motor current spikes beyond the BMS threshold and the pack shuts output to protect the cells. The BMS resets after a short thermal recovery window and power returns. Clear any blockage, check the filter, then restart — if the trip keeps occurring on clear surfaces, verify the replacement cell's BMS cutoff rating matches the original AK330 spec at 14.4V nominal.

Compatible Models

L50 T2265 L60 L60 SES L60 Hybrid L60 Hybrid SES Clean L50 Clean L60 Clean L60 Hybrid G50 G50 Hybrid T2212 G50 T2210

Replaces Part Numbers

AK330

Technical Specifications

Voltage14.4V
Amp Hours2600mAh
Capacity2600mAh
Rate37.44Wh
Net Weight190g /6.70 oz
Gross Weight260g /9.17 oz
Approximate Weight260g /9.17 oz
Dimension 70.50 x 37.20 x 37.00mm

Product Highlights

  • Brand: Eufy
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Eufy L50 loses suction halfway through a clean but the battery indicator still shows charge — is the battery failing?

Not necessarily. When the L50 filter is partially blocked, the motor draws more current than rated to maintain airflow, pulling cell voltage down under load even though the indicator still reads mid-charge. The indicator tracks state of charge at rest, not voltage under motor load. Clean the foam and mesh filters first and test again. If suction holds after a filter clean, the battery is not the cause.

The L50 motor cuts out for a few seconds then restarts on its own — what is triggering that?

That is the BMS tripping on an overcurrent spike, not a faulty battery. On thick carpet or when the brush roll is partially blocked, the motor pulls current above the BMS cutoff threshold and the pack shuts output momentarily to protect the cells. The BMS resets once current drops, which is why power comes back on its own. Clear the brush roll and check for blockages — if trips continue on open hard floor with no obstruction, confirm the replacement cell's nominal voltage matches 14.4V and the BMS cutoff is not set below the original AK330 spec.

The replacement AK330 battery charges fine but the vacuum runs noticeably shorter than it used to — what causes that?

A partially blocked filter is the most common cause. The L50 motor compensates for restricted airflow by drawing more current, which depletes the 2600mAh cell faster than it would under normal load. Check and clean all filter stages before attributing the issue to cell capacity. If the vacuum has been stored on the dock for extended periods between uses, continuous trickle charging may also have degraded the original cell — the replacement cell should recover normal output once filter restriction is ruled out.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.