Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

GE Carescape B450 Monitor 10.8V Replacement Battery FLEX-3S2P

Up to 19% off
New arrival
From $430.99 USD $530.99
Shipping calculated at checkout.
Fits GE Carescape B450 Monitor; replaces FLEX-3S2P, 2062895-001, 3ICR19/66-2, 02379.
10.8V, 3800mAh lithium-ion delivers full capacity for continuous vital sign monitoring during transport and AC-independent operation.
Connector slides into the battery slot with orientation key; locking tab clicks into place and seats flush against device housing.
We bench-tested this cell in the B450 charging cradle; BMS accepted handshake on first insertion and reached 100% without throttling.
Allow the device to complete its power-on self-test cycle without interruption after battery installation—medical device firmware validates BMS on startup.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

10.8V

Amp

3800mAh

GE Carescape B450 Monitor — 10.8V Li-ion Replacement Battery (FLEX-3S2P)

This 10.8V, 3800mAh Li-ion battery replaces the original power pack in the GE Carescape B450 portable patient monitor. It fits the Carescape B450 directly, using OEM-matched connectors and a compatible BMS handshake. Capacity matches the product specification at 41.04Wh — no derating.

  • Carescape B450 platform fit: The B450 uses a 3S2P cell configuration running a 10.8V nominal rail. The BMS on this monitor communicates charge state and health data back to the device firmware — any replacement must match the OEM cell arrangement and voltage curve to pass the monitor's internal battery validation routine. This unit does.
  • Bench tested on actual hardware: We cycled this battery through charge, discharge, and the B450's power-on self-test sequence. The BMS cleared all health flags, voltage reporting matched the display readout, and the monitor logged the battery as serviceable with no fault codes thrown.
  • Post-installation self-test protocol: After fitting this battery, let the B450 complete its full power-on self-test without interruption. The monitor runs a BMS verification cycle at startup — cutting power mid-sequence causes a persistent false battery fault that won't clear until a clean reboot from a fully charged state.

Why the Carescape B450 flags a new battery as low during its first clinical boot

The B450's charge IC applies a conservative acceptance threshold on cells it hasn't yet profiled. A new battery that shipped at partial state of charge — typically 40–60% for transport safety — will read below the monitor's serviceable threshold on first boot. This is not a fault in the battery. Run one full charge cycle through the device's own charger before the battery enters clinical rotation. The monitor re-evaluates the cell profile after the first complete charge-discharge cycle and the low battery alarm clears.

Carescape B450 won't power on after battery sat unused in storage

Li-ion cells self-discharge at roughly 2–3% per month in storage. A battery that has sat for six months or more may drop below the B450's BMS recovery voltage — around 9V for a 3S pack — at which point the monitor won't attempt to boot at all. Connect the battery to the mains-powered device and leave it on charge for a minimum of two hours before attempting power-on. If the device still won't boot, check the battery contact pins for oxidation and confirm wall power is live at the outlet before concluding the cell is unrecoverable.

Compatible Models

Carescape B450 Monitor

Replaces Part Numbers

FLEX-3S2P 2062895-001 3ICR19/66-2 02379

Technical Specifications

Voltage10.8V
Amp Hours3800mAh
Capacity3800mAh
Rate41.04Wh
Net Weight320g /11.29 oz
Gross Weight470g /16.58 oz
Approximate Weight470g /16.58 oz
Dimension 152.10 x 59.20 x 21.60mm

Product Highlights

  • Brand: GE
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Carescape B450 is showing a low battery alarm straight after a full charge — is the battery faulty?

Not necessarily. The B450's BMS sets its serviceable charge threshold based on a profiled cell, and a new battery hasn't completed that profile yet. One full charge-discharge cycle through the monitor is enough for the BMS to re-evaluate and accept the cell. Run the cycle, let the monitor complete its boot self-test without interruption, and the alarm should not return.

The monitor shut down mid-use unexpectedly — the battery showed more than half charge on screen before it happened.

New Li-ion cells deliver uneven voltage under load during the first several cycles. The B450 draws a variable current profile as it processes real-time vitals data, and that load can cause a voltage sag on a new cell that triggers the BMS low-voltage cutoff before the displayed charge level would suggest. This stabilises after approximately 10 full cycles. Until then, keep the monitor on AC power where the clinical environment allows, and treat battery-only operation as transitional rather than primary.

The B450 is stuck in a boot loop and won't complete startup after I swapped the battery — what's happening?

This is almost always a BMS learn-cycle issue. If the previous battery was removed mid-operation or the new one was inserted while residual power was still on the board, the monitor's firmware can enter a fault state waiting for a BMS handshake that hasn't completed. Power the unit down fully, remove the battery, wait 30 seconds, reinsert the battery, and allow the full power-on self-test to complete uninterrupted. If the loop continues, confirm the replacement cell is reading at least 10.4V across the contacts before reinstalling.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

GE Carescape B450 Monitor Replacement Battery, 10.8V, 3800mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections