Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME10
BatteryWeb

WO03XL HP Split 13 Compatible Battery 11.1V 2950mAh

Up to 20% off
New arrival
Sale priceFrom $58.99 USD Regular price $72.99
Shipping calculated at checkout.
Fits HP Split 13 and replaces WO03XL, HSTNN-IB5I, 725496-1B1, 725606-001 OEM batteries.
11.1V at 2950mAh delivers 32.75Wh — matches original capacity for full hybrid tablet-notebook runtime.
Connector plugs straight into the Split 13 battery slot with positive lead forward and locking tab engagement.
We bench-tested this cell on a Split 13-M010DX; BMS accepted the pack on first charge with clean voltage ramp to 11.1V nominal.
On first startup after install, run one full discharge cycle until the system hibernates, then charge uninterrupted to 100% — this resets the BIOS battery learn cycle and clears inaccurate health warnings.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

11.1V

Amp

2950mAh

HP Split 13 x2 Series — 11.1V Li-Polymer Replacement Battery (WO03XL)

This is an 11.1V, 2950mAh (32.75Wh) Li-Polymer replacement battery for the HP Split 13 hybrid notebook line. It fits the Split 13, Split 13-M010DX, Split 13 x2, and Pavilion 13-P100ER among over 100 compatible models. The OEM part number is WO03XL, also cross-referenced as HSTNN-IB5I and 725606-001.

  • Split 13 x2 hybrid platform: These models share a single battery rail tied to both the tablet and keyboard dock sections. The 11.1V three-cell configuration matches the voltage requirement across that shared BMS handshake — swapping a mismatched cell trips the dock connector protection circuit.
  • Bench tested on actual hardware: We ran this cell through a full charge and load cycle on the Split 13 platform. The BMS negotiated correctly, charge acceptance was clean to 100%, and no protection faults triggered during the discharge sweep.
  • Post-install calibration on the Split 13: After fitting this cell, run the laptop down to hibernate cutoff under normal use, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.

Why the Split 13 BIOS reports poor battery health after a cell swap

The Split 13 stores charge history and health data in EEPROM on the original cell's BMS board. When a new cell goes in, that EEPROM data is blank or mismatched, so the BIOS reads it as a degraded or unknown battery. This is a firmware interpretation issue, not a fault with the replacement cell. Running one full discharge-to-hibernate followed by an uninterrupted charge to 100% gives the BIOS enough data to recalibrate. After two to three full cycles, the health indicator typically returns to normal.

Split 13 shutting down at 20–30% charge shown on screen

This symptom appears when the fuel gauge IC hasn't yet mapped the new cell's voltage curve. The gauge is still using the old cell's discharge profile, so it predicts a safe cutoff well before the actual voltage cliff. The laptop shuts down because the system hits its low-voltage threshold while the displayed percentage still looks safe. Run two to three full discharge and charge cycles — the fuel gauge IC recalibrates against the new cell and the shutdowns stop. After calibration, set the display brightness to mid-range and recheck the gauge reads correctly at the 15% mark.

Compatible Models

Split 13 Split 13-M010DX Split 13 x 2 Pavilion 13-P100ER Pavilion 13-P151XX Split 13-M100EE Split 13-M101SL Split 13-M109TU Split 13-M115SG Split 13-M210EG Split 13-M006TU Split 13-M101EC Split 13-M103SH Split 13-M110SI Split 13-M200ER Pavilion 13-P100SR Pavilion 13-P165EO Split 13-M100ER Split 13-M101SS Split 13-M110CA Split 13-M121SA Split 13T-M000 CTO X2 SPLIT 13-M002TU Split 13-M008TU Split 13-M101EL Split 13-M103TU Split 13-M111SA Split 13-M201SA Pavilion 13-P101LA Split 13-M001TU Split 13-M100EX Split 13-M101TU Split 13-M110EA Split 13-M170EF SPLIT 13-M105TU Split 13-M010TU Split 13-M101ER Split 13-M106TU Split 13-M112TU Split 13-M210CA Pavilion 13-P101XX Split 13-M100SE Split 13-M102XX Split 13-M110ET Split 13-M200EF Split 13-M100BR Split 13-M101SE Split 13-M108TU Split 13-M115EG Split 13-M210EA Split 13-M005TU Split 13-M100SX Split 13-M103ES Split 13-M110SA Split 13-M200EO Pavilion 13-P100ES Pavilion 13-P160EF Split 13-M100EI Split 13-M101SO Split 13-M110BR Split 13-M121EA Split 13-M210SA Pavilion 13-P110SP Split 13-M007TU Split 13-M101EE Split 13-M103SS Split 13-M110TU Split 13-M200SA Pavilion 13-P100SS Pavilion 13Z-P100 Split 13-M100ES Split 13-M101SX Split 13-M160EO Split 13T-M100 CTO X2 Split 13-M009TU Split 13-M101EO Split 13-M104TU Split 13-M111TU Split 13-M207EX Pavilion 13-P101SS Split 13-M001XX Split 13-M100LA Split 13-M102TU Split 13-M110EN Split 13-M200EA Pavilion 13-P100ED Pavilion 13-P120CA Split 13-M011TU Split 13-M101EX Split 13-M107TU Split 13-M113TU Split 13-M210DX Pavilion 13-P105SA Split 13-M004TU Split 13-M100SS Split 13-M103EM Split 13-M110EW Split 13-M200EL Pavilion 13-P110NR Pavilion 13-P111NR Pavilion 13-P117CL Split 13-M003TU Pavilion 13-P100EL Pavilion 13-P120NR Split 13-M110DX Pavilion 13-P113CL Pavilion 13-P106SA

Replaces Part Numbers

WO03XL HSTNN-IB5I 725496-1B1 725606-001 3ICP/59/121 725496-171 W003XL W0O3XL WOO3XL

Technical Specifications

Voltage11.1V
Amp Hours2950mAh
Capacity2950mAh
Rate32.75Wh
Net Weight173.7g /6.13 oz
Gross Weight433.7g /15.30 oz
Approximate Weight433.7g /15.30 oz
Dimension 266.36 x 130.50 x 4.03 mm

Product Highlights

  • Brand: HP
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

HP Split 13 showing "0% available (plugged in, charging)" after I put in the new battery — is the cell dead?

The cell isn't dead. The BIOS read blank EEPROM from the new battery and flagged it as unknown, which collapses the displayed percentage to 0%. Unplug the charger, let the laptop run down to hibernate, then plug in and charge uninterrupted to 100%. After that first full cycle, the BIOS recalibrates and the percentage reads correctly.

Why does my Split 13 say the battery is 32Wh in HP Support Assistant but then show a completely different number after replacement?

The Wh figure shown in HP Support Assistant is pulled from the EEPROM on the battery's BMS board. A new cell writes its rated chemistry data, which can differ slightly from what the old cell had stored after years of degradation entries. The replacement cell in this listing is rated at 32.75Wh — if the system shows a slightly different figure in the first few cycles, allow two to three full charge-discharge cycles for the EEPROM data to settle and the system report to stabilise.

New battery fitted to the HP Split 13 x2 — charge stops at 80% and won't go higher no matter how long it's plugged in.

This is a BIOS-controlled charge limit, not a fault with the battery. HP's battery health management firmware caps charging at 80% when it detects a pattern it flags as thermal or cycle risk — it's triggered by old data carried over from the degraded original cell. Go into HP BIOS Setup (F10 at boot), navigate to Power Management, and disable or reset the Battery Care Function. After saving and rebooting, plug in and the charge will proceed to 100%.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.