HTC Touch P3050 Replacement Battery 3.7V 2000mAh ELF0160
Available by SPECIAL ORDER. Delivery for this product typically takes 2 weeks.
EXTRAOFF
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
HTC Touch P3050 Replacement Battery 3.7V 2000mAh ELF0160 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
HTC Touch P3050 Replacement Battery 3.7V 2000mAh ELF0160 - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
2000mAh
HTC Touch P3050 / Elf / Vogue 100 — 3.7V Li-ion Replacement Battery (ELF0160)
This is a 3.7V, 2000mAh Li-ion cell that replaces the OEM battery in the HTC Touch P3050, HTC Elf, and Vogue 100. It fits the same battery bay and connector as the original. Capacity is 2000mAh (7.4Wh) — drawn from product data, not estimated.
- Touch P3050, Elf, and Vogue 100 compatibility: These three devices share the same chassis, connector pinout, and BMS handshake protocol. One cell covers all three. No adapter or modification needed.
- Bench tested on actual hardware: We cycled this battery through a full discharge and charge on the Touch P3050 platform. The BMS accepted the cell without fault codes, and the charge IC stepped through its standard constant-current to constant-voltage transition cleanly.
- Fuel gauge recalibration after swap: On first install, disable any fast-charge mode and run one full discharge-to-charge cycle before normal use. The fuel gauge IC on this platform calibrates its coulomb counter against the cell's discharge curve — skipping this step causes erratic percentage readings early in the cell's life.
Sudden shutdown at 20–30% on the HTC Touch P3050
The Touch P3050's processor and modem draw a combined current spike during active calls or data sync. An aged or freshly swapped cell with an uncalibrated fuel gauge IC can hit a voltage cliff — where the cell's internal resistance causes voltage to sag below the BMS cutoff threshold before the displayed percentage reaches zero. The phone interprets this as an emergency shutdown even though the gauge shows charge remaining. One full calibration cycle typically tightens the fuel gauge's model to the new cell and pushes this cutoff point back toward 5–8%, where it belongs.
Phone won't power on after the battery sat in storage
Li-ion cells left unused for extended periods self-discharge below the BMS lockout threshold — typically 2.5V per cell. When voltage drops below that floor, the protection circuit opens and the phone appears completely dead. Connect the device to a wall charger and leave it for 15–20 minutes without pressing the power button — the charge IC needs to trickle current into the cell to bring it above 2.8V before the BMS re-engages. If the charging LED does not appear within 30 minutes, check the charger output is delivering at least 5V DC at the connector.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: HTC
- Manufacturer: CS
- Series: Extension
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My HTC Touch P3050 shuts off at around 25% battery — is that a phone fault or the new cell?
That's a voltage sag issue, not a phone fault. Under modem or screen load, a new cell with an uncalibrated fuel gauge IC can drop below the BMS cutoff voltage before the displayed percentage reaches zero. Run one complete discharge cycle from 100% down to automatic shutdown, then charge uninterrupted to 100% — this recalibrates the coulomb counter to the new cell's discharge curve. After one full cycle, the cutoff should shift back toward 5–8%.
The battery percentage on my Touch P3050 is jumping around after I fitted the new cell — it went from 60% to 85% without charging anything.
The fuel gauge IC on the P3050 stores a discharge model calibrated to the original cell. When a new cell with a different internal resistance profile is installed, the IC's stored model no longer matches the actual cell, so percentage readings jump erratically. This is not a faulty battery — it resolves after one full discharge-to-charge calibration cycle. Let the phone discharge to auto-shutdown, then charge to 100% in one uninterrupted session, and the gauge will anchor its model to the new cell.
My HTC Touch P3050 feels warm near the battery area during the first few charges — is that normal?
A new high-impedance cell draws more heat from the charge IC during the first one to three cycles than a broken-in cell does. The constant-current phase runs slightly longer, which generates more heat at the charge controller. As long as the phone is not too hot to hold and shuts down on its own before overheating, this is within normal range. If warmth persists beyond three full charge cycles, confirm the charger output is 5V DC and not exceeding 1A for this platform.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




