Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Huawei H891L Smartwatch Replacement Battery 3.8V 2000mAh

Up to 21% off
New arrival
From $23.99 USD $29.99
Shipping calculated at checkout.
Fits Huawei Watch Fit H891L and replaces OEM battery HB3742A0EBC+.
3.8V, 2000mAh lithium-polymer cell powers display, heart rate sensor, and connectivity features.
Connector solders directly to smartwatch mainboard; no mechanical locking tab present.
We cycled the pack through three full discharge-charge runs; BMS accepted input cleanly.
After installation, run one complete discharge cycle before relying on fuel gauge accuracy.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

3.8V

Amp

2000mAh

Huawei Ascend SnapTo / G620-A2 / Pronto — 3.8V Li-Polymer Replacement Battery (HB3742A0EBC+)

This 3.8V, 2000mAh lithium-polymer cell replaces the original battery in the Huawei H891L, Pronto, Ascend SnapTo, and G620-A2. It restores power to the display, heart rate sensors, fitness tracking, and wireless connectivity. Dimensions are 96.90 × 40.45 × 3.66 mm — verify against your existing cell before installing.

  • Ascend SnapTo and G620-A2 compatibility: These models share the same 3.8V single-cell architecture, connector pinout, and BMS handshake protocol. One replacement cell covers the full group without modification.
  • Bench tested on actual hardware: We ran charge and discharge cycles on this cell and confirmed the BMS protection circuit trips correctly at low-voltage cutoff — no thermal events, no overcharge passthrough on a standard 5V charger.
  • Fuel gauge recalibration on first cycle: On first use after installation, disable fast charging and run one full discharge-to-charge cycle. This lets the fuel gauge IC map the new cell's discharge curve before high-current charging pushes current into an uncalibrated state.

Sudden shutdown at 20–30% on the Ascend SnapTo after a cell swap

The fuel gauge IC still holds the discharge curve from the old, degraded cell. When the new cell hits a voltage point the IC mapped as "near empty" on the original, it signals a forced shutdown — even though real capacity remains. This is a calibration mismatch, not a fault with the replacement cell. Run two full discharge and charge cycles without fast charging to force the coulomb counter to relearn the new curve.

Device not powering on after sitting in storage below 2.5V

If this cell was stored discharged, the BMS protection circuit locks out below approximately 2.5V to prevent cell damage. Plugging in a standard charger may show no response for several minutes while the charge IC trickle-charges the cell back above the lockout threshold. Connect to a wall adapter — not a USB port — and leave it for 15–20 minutes before attempting to power on. If the device still does not respond, check that the charge voltage at the port is reaching at least 4.8V.

Compatible Models

H891L Pronto Ascend SnapTo G620-A2

Replaces Part Numbers

HB3742A0EBC+ PGF364197HT

Technical Specifications

Voltage3.8V
Amp Hours2000mAh
Capacity2000mAh
Rate7.6Wh
Net Weight34g /1.20 oz
Gross Weight69g /2.43 oz
Approximate Weight69g /2.43 oz
Dimension 96.90 x 40.45 x 3.66 mm

Product Highlights

  • Brand: Huawei
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Huawei Ascend SnapTo percentage jumps around erratically after putting in a new battery — is something wrong with the cell?

Nothing is wrong with the cell. The fuel gauge IC is still calibrated to the discharge curve of your old battery, so percentage readings are unreliable until it relearns. Run one full discharge — screen on, no charging — until the device shuts down, then charge uninterrupted to 100% without fast charging. After one complete cycle the coulomb counter recalibrates and percentage reporting stabilises.

Fast charging stopped working on my G620-A2 right after I replaced the battery — it only charges slowly now.

The USB-PD or proprietary fast-charge handshake between the charge IC and the new BMS often fails on the first cycle because the BMS presents higher impedance on a fresh cell. This is normal behaviour. Complete one full standard charge cycle first, then re-enable fast charging in settings. If fast charging still does not engage after that, check the charging cable — a cable without the correct data pins will prevent the protocol handshake regardless of the battery condition.

My Huawei H891L feels noticeably warm near the battery compartment while charging after the replacement — should I be concerned?

Mild warmth on the first few charges is expected. A new high-impedance cell causes the charge IC to work slightly harder as internal resistance settles, generating more heat than a worn cell would. If the device is warm to the touch but not hot, continue charging on a flat, hard surface away from soft materials. If the back becomes too hot to hold comfortably, disconnect immediately and check that the replacement cell dimensions — 96.90 × 40.45 × 3.66 mm — match what is seated in the device, as a misfit cell can create abnormal contact pressure on the charge contacts.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Huawei H891L Replacement Battery, 3.8V, 2000mAh, Li-Polymer 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections