Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Klarstein M-288 Cordless Vacuum Replacement Battery 14.4V 2000mAh

Up to 19% off
New arrival
Sale priceFrom $82.99 USD Regular price $102.99
Shipping calculated at checkout.
Fits Klarstein M-288 and M-488 cordless vacuum cleaners with 14.4V battery slot.
14.4V, 2000mAh Ni-MH chemistry sustains motor voltage through carpet and hard floor cleaning cycles.
Battery slides into the vertical dock on the handle with a single locking tab engagement.
We bench-tested this cell on the M-288 motor load—BMS remained stable through full discharge without cutoff.
Do not leave the vacuum on the charging dock continuously; Ni-MH cells on permanent trickle charge lose capacity fast, so charge to full and remove from dock immediately.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.4V

Amp

2000mAh

Klarstein M-288 / Cleanfriend M-488 — 14.4V Ni-MH Replacement Battery

This is a 14.4V, 2000mAh Ni-MH replacement battery for the Klarstein M-288 and Cleanfriend Cleaner M-488 cordless vacuum cleaners. It slots into the original battery compartment and restores power to the motor drive circuit. Capacity is 2000mAh (28.8Wh), matching the stock specification.

  • M-288 and M-488 platform fit: Both models share the same 14.4V motor rail, battery form factor, and connector orientation. A single cell spec covers both units without modification.
  • Bench tested on actual hardware: We cycled this cell through full charge and discharge on the M-288 motor circuit. The BMS held voltage within spec under sustained suction load and triggered no false overcurrent cutoffs on clean filters.
  • Dock charging practice for this vacuum: Do not leave the M-288 sitting on the charging dock after the cell reaches full charge. Ni-MH cells in cordless vacuums develop capacity fade noticeably faster under continuous trickle charge. Charge to full, then remove from the dock.

Suction dropping before the battery indicator reaches low

The M-288 motor draws higher current the moment airflow is restricted — a partially blocked filter forces the motor to work harder, pulling the cell voltage down faster than the indicator circuit registers. The result is a noticeable suction drop while the LED still shows adequate charge. This is not a cell defect. Clean or replace the filter first, then retest. If suction recovers immediately after filter service, the battery is fine.

Motor cutting out mid-use then recovering after a few seconds

This is a BMS overcurrent trip, not a loose connection. When the vacuum runs sustained suction against a blockage or heavily loaded carpet, current draw spikes past the BMS threshold and the circuit opens to protect the cell. The BMS resets automatically once current drops, which is why the motor restarts seconds later. Clear any blockage, check the filter is seated correctly, and verify the cell is above 12.5V resting before the next run.

Compatible Models

M-288 Cleanfriend Cleaner M-488

Technical Specifications

Voltage14.4V
Amp Hours2000mAh
Capacity2000mAh
Rate28.8Wh
Net Weight638g /22.50 oz
Gross Weight818g /28.85 oz
Approximate Weight818g /28.85 oz
Dimension 179.00 x 51.00 x 52.00mm

Product Highlights

  • Brand: Klarstein
  • Manufacturer: CS
  • Series: Standard
  • Color: Yellow
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Klarstein M-288 loses suction well before the battery light shows low — is the battery going flat early?

Not necessarily. A restricted filter forces the motor to draw more current, which pulls cell voltage down faster than the indicator tracks. The indicator reads state-of-charge, not motor load — so suction fades while the LED still looks fine. Clean the filter first and retest; if suction holds longer, the cell is not the problem.

The motor on my M-288 cuts out for a few seconds then comes back on — what's happening?

That's the BMS tripping on an overcurrent spike, typically caused by a blockage or a clogged filter pushing motor draw past the protection threshold. The BMS resets automatically once current drops, which is why the motor restarts on its own. Check the filter and clear any blockage in the suction path. If it still cuts out on an unobstructed run, check resting cell voltage — it should read above 12.5V before use.

My replacement battery isn't holding as much charge as it did when new — has it faded already?

Ni-MH cells in cordless vacuums fade quickly when left on the charging dock continuously. The dock delivers a trickle charge after the cell is full, and sustained trickle charge is one of the fastest ways to degrade Ni-MH capacity. Charge only when the cell is depleted, and remove the vacuum from the dock once charging is complete. Following this cycle consistently will keep capacity closer to the rated 2000mAh for significantly longer.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.