Lenovo IdeaPad Y330 Replacement Battery LO8S6D11 11.1V 4400mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Lenovo IdeaPad Y330 Replacement Battery LO8S6D11 11.1V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Lenovo IdeaPad Y330 Replacement Battery LO8S6D11 11.1V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
4400mAh
Lenovo IdeaPad Y330 Series — 11.1V Li-ion Replacement Battery (LO8S6D11)
This 11.1V, 4400mAh (48.84Wh) lithium-ion cell replaces the original battery in Lenovo IdeaPad Y330 laptops, including the Y330-20002, Y330-2269, and Y330A variants. It fits the OEM connector and BMS communication protocol on these models without modification. Cross-references OEM part numbers LO8S6D11 and L08L6D11.
- IdeaPad Y330 platform compatibility: These Y330 variants share the same 11.1V three-cell configuration, connector pinout, and BMS handshake protocol — so one cell works across the full series without re-pinning or firmware changes.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on Y330 hardware. The BMS accepted the new cell immediately, balanced all three cell groups, and held voltage stable across full CPU and display load.
- First-cycle calibration after install: After fitting this cell, run one full discharge to hibernate cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the false "poor health" warning that appears after most cell swaps on this platform.
BIOS reporting battery health as poor immediately after replacement
The Y330 BIOS reads health data from EEPROM registers on the battery controller, not from real-time voltage. When a new cell goes in, those registers still carry the degraded history of the old pack. The BIOS flags the new cell as worn before it has run a single cycle. One full discharge-to-hibernate followed by an uninterrupted charge to 100% forces the firmware to rewrite the learn cycle data against the actual new cell chemistry. After that cycle, the health indicator corrects itself without any BIOS intervention.
Laptop shutting down at 20–30% charge shown on screen
This happens when the fuel gauge IC's stored discharge curve no longer matches the actual cell. The gauge reports 25% remaining, but the real cell voltage has already hit the BMS low-voltage cutoff under combined CPU and display load. The Y330 draws hard during full-screen video or sustained CPU tasks — enough to trigger an abrupt shutdown even when the status bar shows charge remaining. Run two full calibration cycles — discharge to hibernate, charge to 100% — to align the fuel gauge IC with the new cell's actual voltage curve.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Lenovo
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Why does Windows show 0% or "plugged in, not charging" right after I installed the new battery?
The Y330's fuel gauge IC retains the discharge curve from the old cell and cannot immediately map it to the new one. Windows reads that stale data and reports 0% or refuses to show a valid state of charge. Plug in the charger, let the battery reach 100% without interruption, then run it down to hibernate — after one full cycle the gauge IC recalibrates against the new cell and Windows reports correctly.
The system info screen shows the wrong Wh rating — it still shows the old battery's capacity, not 48.84Wh. Is the cell faulty?
The Wh figure Windows displays comes from the EEPROM on the battery controller, not from a live measurement. When the old pack is swapped out, the BIOS may still be reading a cached or mismatched register value from the previous session. Run one full discharge-to-hibernate cycle followed by a full uninterrupted charge — this prompts the firmware to rewrite the design capacity register from the new cell's EEPROM data, and the correct 48.84Wh figure should appear in system info afterward.
My Y330 charges fine but the battery percentage jumps wildly — drops from 60% to 10% in minutes, then climbs back. What causes that?
This is a fuel gauge IC calibration issue. The gauge is interpolating charge state from a discharge curve built around the old, degraded cell — so it misreads voltage slopes on the new cell and produces erratic percentage jumps. The fix is two consecutive full calibration cycles: discharge to automatic hibernate, then charge without interruption to 100%, twice in a row. After the second cycle, the IC has enough data points to track the new cell accurately and the percentage readout stabilises.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





