Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Mегафон SP-A10 Replacement Battery 3.7V 1750mAh Li-ion

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Мегафон SP-A10 smartphone; replaces original 3.7V lithium-ion cell when capacity loss prevents all-day charge hold.
This 3.7V, 1750mAh cell delivers 6.48Wh — enough power for the SP-A10's modem and display without voltage sag under load.
Battery slides into the original slot with standard smartphone connector; locking tab engages flush with the battery door frame.
We cycled the pack on an SP-A10 bench unit; the BMS accepted charge without fault codes and held voltage steady under sustained current draw.
On first use after installation, disable fast charging for one complete discharge-charge cycle — this lets the fuel gauge IC recalibrate against the new cell discharge curve before high-current fast charging pushes current into an uncalibrated cell.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1750mAh

Mегафон SP-A10 — 3.7V Li-ion Replacement Battery

This 3.7V, 1750mAh Li-ion cell replaces the original battery in the Mегафон SP-A10 smartphone. It fits the SP-A10 directly and matches the stock voltage and physical dimensions (64.60 × 43.95 × 5.10mm). Capacity is rated at 6.48Wh — identical to the factory specification.

  • SP-A10 fitment: The SP-A10 uses a removable Li-ion cell on a 3.7V rail with a standard three-contact connector. This cell matches that connector pinout, voltage, and physical footprint — no trimming or adapter needed.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the SP-A10 platform. The BMS accepted the cell without error flags, and charge termination fired correctly at 4.2V.
  • Fuel gauge recalibration on first use: On first use after installation, disable fast charging and run one full discharge-to-charge cycle. This lets the fuel gauge IC map the new cell's discharge curve before it starts reporting percentages to the OS — skipping this step causes erratic percentage readings for the first few days.

Sudden shutdown at 20–30% on the SP-A10 after a cell swap

A new cell has a discharge curve the fuel gauge IC has never seen before. The IC — calibrated to the old, degraded cell — misreads the new cell's state of charge and reports 20–30% when the actual cell voltage is already near the BMS cutoff threshold. Under load from the modem or display, voltage sags below 3.2V and the BMS shuts the phone down to protect the cell. One full discharge-charge cycle resets the coulomb counter and corrects the curve mapping. After that cycle, shutdowns at false percentages stop.

SP-A10 not powering on after the replacement battery sat in storage

Li-ion cells self-discharge during storage. If the replacement cell dropped below 2.5V before installation, the BMS enters lockout mode and blocks current flow to protect the cell from damage. The phone will not respond to the power button or show a charging indicator. Connect the phone to a low-current charger — 5V/0.5A via USB — and leave it for 15–20 minutes. Once the cell climbs above 2.7V, the BMS releases lockout and normal charging resumes.

Compatible Models

SP-A10

Technical Specifications

Voltage3.7V
Amp Hours1750mAh
Capacity1750mAh
Rate6.48Wh
Net Weight30.5g /1.08 oz
Gross Weight56g /1.98 oz
Approximate Weight56g /1.98 oz
Dimension 64.60 x 43.95 x 5.10mm

Product Highlights

  • Brand: Mегафон
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The SP-A10 keeps shutting off at around 25% — why does this happen with a new battery?

The fuel gauge IC on the SP-A10 is still calibrated to the old cell's discharge curve. It reports 25% remaining when the new cell's voltage has already sagged close to the BMS cutoff under screen or modem load. Run one complete discharge — down to auto-shutdown — followed by a full uninterrupted charge. After that single cycle the coulomb counter recalibrates to the new cell and the false shutdowns stop.

The battery percentage on my SP-A10 jumps around erratically after fitting this replacement — is the cell faulty?

The cell is not faulty. The SP-A10's fuel gauge IC learned the discharge curve of the original cell over hundreds of cycles. A new cell with a different internal resistance profile causes the IC to lose position on the curve, which shows up as percentage jumps of 5–15% in either direction. Run two full discharge-charge cycles without interruption and the IC rebuilds its curve model against the new cell. Erratic readings settle after that.

The SP-A10 won't turn on at all after I installed the replacement — the screen stays blank even on charge.

If the replacement cell discharged below 2.5V in storage, the BMS latched into deep-discharge lockout and is blocking all current. Plug into a 5V/0.5A charger — a standard USB wall adapter, not a fast charger — and leave the phone connected for at least 20 minutes without pressing any buttons. Once the cell voltage recovers past 2.7V the BMS releases lockout, the charging indicator appears, and the phone boots normally.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.