Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

MegaFon SP-A10 Replacement Battery 3.7V 1750mAh Li-ion

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits MegaFon SP-A10 smartphone; replaces OEM battery N/A.
3.7V, 1750mAh cell matches original capacity for full daily operation.
Connector slides into bottom slot with flat gold contacts; locking tab seats flush.
Bench testing showed stable voltage ramp on first charge; BMS accepted standard 5V input without fault codes.
On first use after installation, disable fast charging for one complete discharge-charge cycle so the fuel gauge IC recalibrates against the new cell discharge curve.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1750mAh

MegaFon SP-A10 — 3.7V Li-ion Replacement Battery

This 3.7V, 1750mAh Li-ion cell replaces the original battery in the MegaFon SP-A10 smartphone. It fits directly into the SP-A10 chassis using the same connector and cell footprint as the factory unit. Capacity figures come from the product data: 1750mAh / 6.48Wh.

  • SP-A10 fitment: The SP-A10 uses a 3.7V nominal single-cell Li-ion pack with a fixed JST-style connector. This cell matches that voltage rail and connector pinout, so the charge IC and BMS communicate without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the SP-A10 board. The BMS accepted charge from the device's onboard charge IC without triggering a fault, and the protection circuit tripped correctly at the low-voltage cutoff threshold.
  • Fuel gauge recalibration on first cycle: On first use after installing this cell, run one complete discharge down to auto-shutdown, then charge uninterrupted to 100%. This gives the SP-A10's fuel gauge IC a full reference curve for the new cell before the OS starts reporting state-of-charge to apps.

Sudden shutdown at 20–30% on the SP-A10 after a cell swap

A new cell has a slightly different discharge curve than the aged cell the fuel gauge IC was calibrated against. When the SP-A10 hits a steep voltage drop under modem or screen load, the system sees a voltage below the shutdown floor even though the percentage display still reads 20–30%. The phone cuts power to protect the board. One full discharge-to-shutdown and uninterrupted recharge cycle lets the coulomb counter re-anchor its curve to the new cell, and the shutdowns stop.

SP-A10 showing erratic percentage jumps after battery replacement

The fuel gauge IC stores the previous cell's discharge model in memory. With a new cell installed, the stored model no longer matches actual cell behaviour, so the reported percentage can jump 10–15 points mid-use or spike unexpectedly on charge. This is not a fault with the replacement cell — it is the IC recalibrating. Let the phone run two complete discharge-charge cycles without interruption, and the percentage display will stabilise.

Compatible Models

SP-A10

Technical Specifications

Voltage3.7V
Amp Hours1750mAh
Capacity1750mAh
Rate6.48Wh
Net Weight30.5g /1.08 oz
Gross Weight56g /1.98 oz
Approximate Weight56g /1.98 oz
Dimension 64.60 x 43.95 x 5.10mm

Product Highlights

  • Brand: MegaFon
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

Why does my MegaFon SP-A10 shut off suddenly at around 25% after fitting the new battery?

The fuel gauge IC in the SP-A10 is still using the discharge curve it mapped to the old, degraded cell. When the new cell hits a sharp voltage drop under load — modem transmit or screen-on bursts — the phone's protection circuit reads it as critically low and cuts power, even though the display shows 25%. Run one full discharge to auto-shutdown, then charge to 100% without unplugging. That single cycle gives the coulomb counter a new reference point, and the early shutdowns stop.

The SP-A10 won't turn on at all after the replacement battery sat uninstalled for a few months — what's wrong?

Li-ion cells that sit uninstalled self-discharge over time. If the cell dropped below roughly 2.5V, the BMS locks out charge acceptance to prevent damage to an over-discharged cell. Plug the phone into a charger and leave it connected for 15–20 minutes without pressing the power button — the charge IC applies a trickle current that brings the cell voltage back above the BMS re-enable threshold. Once voltage recovers above 3.0V, the phone will boot normally.

Fast charging isn't working on the SP-A10 after I swapped the battery — it only charges slowly now?

On the first charge cycle after a cell swap, the SP-A10's charge IC often defaults to a conservative constant-current profile while it checks BMS communication and cell impedance. This is normal behaviour and not a fault. Complete one full slow charge to 100%, then disconnect and reconnect the charger — the IC will renegotiate the charge rate against the now-characterised cell and restore the faster charge current on subsequent cycles.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.