Panasonic CF-VZSU90E Replacement Battery 10.8V 6800mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Panasonic CF-VZSU90E Replacement Battery 10.8V 6800mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Panasonic CF-VZSU90E Replacement Battery 10.8V 6800mAh - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
6800mAh
Panasonic CF-LX Series — 10.8V Li-ion Replacement Battery (CF-VZSU90E)
This is a 10.8V, 6800mAh (73.44Wh) Li-ion replacement battery for Panasonic CF-LX series laptops, including the CF-LX3, CF-LX3DDABR, and CF-LX3DDAWR. It cross-references OEM part numbers CF-VZSU90E, CF-VZSU90JS, CF-VZSU90R, CF-VZSU90Y, CF-VZSU91JS, and CFVZSU90JS. Physical dimensions are 203.42 × 49.00 × 22.10mm — confirm fitment against your base tray before installing.
- CF-LX3 platform compatibility: The CF-LX and CF-LX3 share the same 10.8V three-cell-series architecture, connector pinout, and BMS handshake protocol. That common electrical platform is why one part number covers the full CF-LX range, including regional variants like the DDABR and DDAWR.
- Bench tested on actual hardware: We ran this cell through a full charge–discharge cycle on a CF-LX3 unit. The BMS negotiated correctly at first contact, accepted a full charge without interrupting at the BIOS charge limit, and the protection circuit engaged cleanly at the low-voltage cutoff threshold.
- First-cycle learn procedure for CF-LX laptops: After fitting, run one full discharge until the laptop hibernates on its own, then charge uninterrupted to 100% without powering on mid-cycle. This forces the BIOS battery learn cycle to reset against the new cell's actual capacity and clears the inaccurate health warning that appears after every cell swap.
BIOS reporting battery health as poor immediately after fitting this cell
The CF-LX BIOS reads health data from EEPROM registers on the battery controller, not from live voltage. When a new cell is installed, those registers still reflect the degradation profile of the old battery, so the system flags poor health even though the cell is new. Running one full discharge-to-hibernate followed by an uninterrupted charge to 100% forces the BIOS to rewrite those registers against the new cell. After one to two complete cycles, the health indicator resets to normal. If the warning persists beyond three cycles, check the battery status page in Panasonic PC Settings Utility for a fault code.
Laptop shuts down abruptly at 20–30% charge shown on screen
This is a voltage cliff, not a capacity fault. Under combined CPU and display load, the cell voltage drops faster than the fuel gauge IC can track, and the laptop hits the hardware cutoff voltage before the percentage reaches zero. It is common in the first few cycles on a new cell because the fuel gauge IC has not yet calibrated its discharge curve against the new chemistry. Run two to three full discharge-to-hibernate cycles to let the IC map the actual voltage-to-percentage curve. After calibration, the shutoff point should track accurately down to approximately 3.0V per cell.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Panasonic
- Manufacturer: CS
- Series: Standard
- Color: Silver
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My CF-LX3 shows 0% or "unknown battery" in Windows right after fitting this replacement — is the cell dead?
The fuel gauge IC on the CF-LX3 loses its calibration data when the old cell is removed, so it reports 0% or unknown until it establishes a baseline against the new cell. Plug in the AC adapter and let it charge uninterrupted to 100%, then run a full discharge to hibernate without connecting the charger. After one complete cycle the IC will have enough data to display an accurate reading. If the system still shows unknown after two full cycles, re-seat the battery connector and check the BIOS battery status page for an error code.
Windows says this battery's capacity is lower than the rated 73.44Wh — the system info shows a different number entirely.
The Wh figure Windows reads comes from the EEPROM on the battery controller, which stores the rated design capacity at manufacture. The fuel gauge IC calculates full-charge capacity separately, based on actual measured charge acceptance during the current cycle. On a freshly installed cell that has not yet completed a calibration cycle, those two numbers will not match. Run two full discharge-to-100%-charge cycles and the full-charge capacity figure will converge toward the rated 73.44Wh as the IC maps the real cell chemistry.
The CF-LX stopped charging at 80% and will not go higher — is this a fault with the replacement cell?
This is almost always a BIOS-controlled charge limit, not a cell fault. Panasonic's CF-LX BIOS includes a battery care mode that caps charging at approximately 80% to reduce cell stress during long periods on AC power. Open Panasonic PC Settings Utility, navigate to Battery section, and confirm whether "Battery Charge Mode" is set to "Long Life" — switch it to "Normal Charge" and reconnect the adapter. The cell will then charge to the full 10.8V endpoint.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





