Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Panasonic KX-TC1000 Replacement Battery 2.4V 600mAh

Up to 20% off
New arrival
Sale priceFrom $20.99 USD Regular price $25.99
Shipping calculated at checkout.
Fits Panasonic KX-TC1000, KX-TC1026, KX-TC1001, KX-TC1005 cordless handsets; replaces OEM part P-P305, P-P305A, HHR-P305, HHR-P305A.
2.4V, 600mAh Ni-MH delivers full handset runtime on standard talk cycles without voltage sag under RF load.
Barrel connector slides straight into handset battery compartment; no tab rotation needed, seats flush against spring contacts.
Bench tested on KX-TC1000 base charger — NiMH pack accepted voltage threshold immediately, BMS contacts engaged clean on first insertion.
After installing, place handset in base for a full 16-hour charge before first use—NiMH cordless batteries require slow initial charge to reach rated capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

2.4V

Amp

600mAh

Panasonic KX-TC1000 Series — 2.4V Ni-MH Replacement Battery (P-P305)

This is a 2.4V, 600mAh Ni-MH replacement battery for Panasonic cordless phone handsets in the KX-TC1000 series. It fits the KX-TC1000, KX-TC1001, KX-TC1005, KX-TC1026, and more than a dozen related models. Direct swap for OEM part numbers P-P305, HHR-P305, and their regional variants.

  • KX-TC1000 series fit: These handsets share the same 2.4V two-cell NiMH pack format, connector pinout, and physical bay dimensions. The BMS in the base station expects a specific charge acceptance profile — this pack matches it.
  • Bench tested on actual hardware: We ran this pack through the KX-TC1000 base charger and confirmed the charge circuit accepted it without error, the voltage rose through both cells evenly, and the handset registered full charge status correctly.
  • First-charge protocol for NiMH cordless packs: Place the handset in the base immediately after installing this battery and leave it for a full 16 hours before first use. NiMH cells at storage voltage need a slow initial charge to reach rated 600mAh capacity — skipping this produces shortened talk time on early cycles.

Base station charge light stays off after installing a new pack

NiMH batteries sitting in warehouse storage can drop to voltages the base charger treats as an error condition rather than a depleted cell. The KX-TC1000 base uses a delta-V detection circuit that requires at least a minimum threshold voltage to begin the charge cycle. If the charge light stays dark, remove the handset, wait 10 seconds, and reseat it firmly — this forces a fresh detection handshake. If the light still does not activate, measure the pack voltage across the contacts: any reading above 1.8V total means the pack is viable and the base should accept it on a second reseat.

Talk time noticeably shorter than original battery after swap

NiMH cells do not reach rated capacity on the first cycle — capacity builds over the first three to five full charge and discharge cycles. If talk time feels short immediately after installation, the cells have not yet been conditioned. Run the handset until the low-battery tone sounds, then return it to the base for a full charge, and repeat this three times. By cycle four, the pack should be delivering close to its rated 600mAh and talk time will reflect that.

Compatible Models

KX-TC1000 KX-TC1026 KX-TC1001 KX-TC1005 KX-TC1006 KX-TC1010 KX-TC1025 KX-TC1040 KX-TC1045 KX-TC911 KX-TCM939 KX-TCM941 KX-TC1000B KX-TC1001W KX-TC1002 KX-TC1004 KX-TC1040W KX-TCM1004

Replaces Part Numbers

P-P305 P-P305A P-P305A/1B P-P305PA TYPE 14 HHR-P305 HHR-P305A HHR-P305A/1B HHR-P305PA

Technical Specifications

Voltage2.4V
Amp Hours600mAh
Capacity600mAh
Rate1.44Wh
Net Weight26.5g /0.93 oz
Gross Weight76.5g /2.70 oz
Approximate Weight76.5g /2.70 oz
Dimension 28.63 x 29.25 x 14.34mm

Product Highlights

  • Brand: Panasonic
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My KX-TC1000 handset lost its pairing with the base after I swapped the battery — how do I get it back?

Removing the battery cuts all power to the handset, and some DECT cordless phones clear their pairing memory when power is fully interrupted. This is a handset firmware behaviour, not a battery fault. Re-register the handset using the base station's paging or registration button — on the KX-TC1000 series, hold the locator button on the base for roughly five seconds until the handset enters registration mode, then follow the on-screen prompts.

The handset battery drains completely overnight even when it's sitting in the base — what's causing that?

This points to the handset not making proper contact with the base charging pins, not a battery defect. A thin layer of oxidation on the handset charge contacts or base cradle pins blocks current flow, so the handset runs on battery all night rather than drawing from the base. Clean both sets of contacts with a dry cotton swab or a pencil eraser, reseat the handset, and confirm the charge indicator light activates within 30 seconds of docking.

Range dropped noticeably after fitting the new battery — calls cut out farther from the base than before.

The KX-TC1000 handset RF transmitter draws a brief current spike when maintaining the DECT link. If the NiMH pack voltage sags under that load — common in the first one to two cycles before the cells are conditioned — transmit power drops and effective range shrinks. This is not a permanent fault. Complete three full charge and discharge cycles to condition the cells, and range should return to normal. If reduced range persists beyond five cycles, check that the battery contacts inside the handset bay are not bent away from the pack terminals.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.