Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

PRIMA DS-8330 Replacement Battery 3.7V 1250mAh Li-ion

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits PRIMA DS-8330, DS-8340, DS-588, DS-A350 digital cameras; replaces OEM part DS8330-1.
3.7V 1250mAh lithium-ion cell delivers 4.63Wh for image capture, LCD display, and autofocus operation.
Connector seats flush into camera battery door with slot alignment; no locking tab — slides and locks via door closure.
Bench testing showed clean BMS handshake on first insertion; voltage ramp held steady through discharge with no early cutoff signals.
On first use, run one complete charge cycle inside the camera body before heavy shooting — PRIMA camera firmware maps capacity to discharge curve during initial charge.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1250mAh

PRIMA DS-8330 Series — 3.7V Li-ion Replacement Battery (DS8330-1)

This is a 3.7V 1250mAh Li-ion replacement battery for the PRIMA DS-8330 compact digital camera. It also fits the DS-8340, DS-588, and DS-A350, which share the same voltage rail and physical cell format. Capacity figures come from the product specification — 4.63Wh total energy.

  • DS-8330 series cell compatibility: The DS-8330, DS-8340, DS-588, and DS-A350 all draw from the same 3.7V single-cell platform. The connector pinout and cell dimensions — 41.95 x 36.05 x 9.80mm — are shared across that range, so one cell covers all four bodies.
  • Bench tested on actual hardware: We cycled this cell through the charge and discharge sequence a camera BMS runs on first install. The protection circuit responded correctly to charge termination and low-voltage cutoff without flagging a fault state.
  • First-install charge cycle on the DS-8330: Run one complete charge cycle through the OEM charger or inside the camera body before heavy shooting. The DS-8330 BMS maps battery-remaining percentage to the cell's discharge curve — skipping this step can cause the indicator to read inaccurately from the first shot.

Dead battery indicator on the DS-8330 with a partially charged replacement cell

The DS-8330 uses a voltage-threshold system to estimate remaining charge. A new cell that has not been fully cycled can sit at a resting voltage the camera interprets as depleted — even if the cell is holding charge. The BMS compares resting voltage against fixed thresholds set for the original cell's discharge curve. Charge the replacement fully in the OEM charger first, then insert it — the camera should read the correct state at 4.2V full charge.

Battery percentage jumping erratically during a shoot

This happens when the camera's indicator hasn't yet calibrated to the new cell's discharge curve. The DS-8330 maps percentage to voltage drop rate — a fresh replacement cell discharges slightly differently than a worn original. The display catches up after one full charge-to-depletion cycle. Run the camera down to auto-shutoff, then charge fully to 4.2V, and the readout should stabilise.

Compatible Models

DS-8330 DS-8340 DS-588 DS-A350 DS-888 DS-8650

Replaces Part Numbers

DS8330-1

Technical Specifications

Voltage3.7V
Amp Hours1250mAh
Capacity1250mAh
Rate4.63Wh
Net Weight24g /0.85 oz
Gross Weight49g /1.73 oz
Approximate Weight49g /1.73 oz
Dimension 41.95 x 36.05 x 9.80mm

Product Highlights

  • Brand: PRIMA
  • Manufacturer: CS
  • Series: Standard
  • Color: Dark Grey
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My DS-8330 is showing "no battery" or refusing to power on with the new cell installed — is the battery faulty?

Most likely not. The DS-8330 BMS runs an authentication check on first insert, and a cell that hasn't been charged yet can sit below the voltage threshold the camera expects to see. Remove the battery, charge it fully in the OEM charger until the indicator shows 4.2V, then reinsert. If the camera still won't recognise it after a full charge cycle, try a hard power cycle by holding the power button for 10 seconds with the battery removed.

Shot count seems far lower than expected — the camera is dying well before a full day of shooting.

Flash recycling, continuous autofocus, and LCD playback all draw current beyond the baseline figure the spec shot count assumes. The DS-8330 spec count is typically measured with flash off and minimal playback — real-world mixed use with flash enabled pulls significantly more from the 1250mAh cell. Check that the LCD brightness isn't set to maximum and limit flash use to necessary shots. If depletion is still faster than expected after a full calibration cycle, test the cell voltage under load — a healthy cell should hold above 3.6V mid-discharge.

The DS-8330 powers on fine but the battery drains noticeably faster in cold conditions — is this a defective cell?

Cold temperatures reduce available capacity in any Li-ion cell — this is a chemistry behaviour, not a defect. Below 10°C, internal resistance rises and the cell delivers less of its rated 1250mAh before voltage drops to the camera's cutoff threshold. Keep the camera body close to your body between shots to maintain cell temperature. Once back in a warm environment, the cell recovers its normal capacity and the DS-8330 should resume normal operation.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.