Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Samsung Galaxy J5 2017 Replacement Battery EB-BJ530ABE 3.85V 3000mAh

Up to 20% off
New arrival
Sale priceFrom $25.99 USD Regular price $31.99
Shipping calculated at checkout.
Fits Samsung Galaxy J5 2017 (SM-J530L, SM-J530K) and replaces OEM part EB-BJ530ABE.
3.85V at 3000mAh capacity restores full day operation for calls, messaging, and apps on this device.
Connector slides straight into the battery slot; locking tabs on both sides secure the cell flush against the phone frame.
We ran full discharge cycles on the bench — BMS fuel gauge IC accepted the new cell without lockout or early cutoff errors.
On first use after installation, disable fast charging for one complete discharge-charge cycle so the fuel gauge recalibrates against this cell's discharge curve before high-current charging begins.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.85V

Amp

3000mAh

Samsung Galaxy J5 2017 — 3.85V Li-Polymer Replacement Battery (EB-BJ530ABE)

This is a 3.85V, 3000mAh Li-Polymer replacement battery for the Samsung Galaxy J5 2017 smartphone. It fits the SM-J530L, SM-J530K, Galaxy J5 2017 TD-LTE, and related SM-J530 variants. OEM part number EB-BJ530ABE confirms direct fitment to this battery bay.

  • SM-J530 series compatibility: All SM-J530 variants share the same battery bay dimensions, connector pinout, and BMS handshake protocol. The fuel gauge IC across this series reads cell impedance on first boot — the replacement cell must match the original voltage rail at 3.85V nominal for the handshake to complete without error flags.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the SM-J530 platform. The BMS accepted the cell without fault codes, and the charge IC progressed normally through trickle, constant-current, and constant-voltage phases to full termination.
  • Fuel gauge recalibration on first install: After fitting this cell, disable fast charging and complete one full discharge-charge cycle before resuming fast charge. This allows the coulomb counter to map its calibration curve against the new cell before high-current charging begins on an uncalibrated gauge.

Sudden shutdown at 20–30% on the replacement cell

This is a voltage cliff issue. When the modem fires a transmission burst or the screen peaks at full brightness, the cell must sustain voltage under that load spike. A new cell with an uncalibrated fuel gauge can show 25% remaining while the actual open-circuit voltage has already dropped close to the BMS cutoff threshold. The phone shuts down because the BMS trips, not because the gauge reads zero. One full discharge-charge cycle recalibrates the coulomb counter and resolves this — confirm the cell reaches 4.35V at full charge termination.

Phone stays dark after sitting in storage — no charge response on screen

If the replacement battery discharged below approximately 2.5V during storage, the BMS enters lockout to prevent damage to the cell. Standard charging will not wake it from this state. Connect to a wall charger — not a PC USB port — and leave it untouched for 20–40 minutes. The charge IC applies a trickle recovery current that slowly brings the cell voltage back above the BMS re-enable threshold, after which normal charging resumes and the screen responds.

Compatible Models

Galaxy J5 2017 SM-J530L Galaxy J5 2017 TD-LTE SM-J530K SM-J530S SM-J530F/DS Galaxy J5 2017 Duos TD-LTE Galaxy J5 Pro SM-J530Y/DS Galaxy J5 Pro 2017 Duos TD-LTE SM-J530YM/DS SM-J530FM/DS

Replaces Part Numbers

EB-BJ530ABE

Technical Specifications

Voltage3.85V
Amp Hours3000mAh
Capacity3000mAh
Rate11.55Wh
Net Weight36.2g /1.28 oz
Gross Weight71g /2.50 oz
Approximate Weight71g /2.50 oz
Dimension 87.60 x 39.52 x 4.10mm

Product Highlights

  • Brand: Samsung
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Galaxy J5 2017 shows 100% after charging but drops to 70% within minutes of unplugging — is the new battery faulty?

The cell is most likely fine. The fuel gauge IC was calibrated to the discharge curve of the old, degraded cell — it does not automatically reset when a new cell is installed. The coulomb counter is misreading state-of-charge against the wrong reference curve. Run one full discharge down to auto-shutdown, then charge uninterrupted to 100% with fast charging disabled — the gauge recalibrates against the new cell and the percentage readings stabilise.

Fast charging stopped working on the J5 2017 after I swapped the battery — the phone only slow-charges now.

On the first cycle after a cell swap, the charge IC sometimes defaults to standard current until it has completed one full charge termination. This is a conservative protection behaviour — the IC does not apply high current to a cell it has not yet profiled. Charge the phone fully once at standard speed, allow it to discharge to around 20%, then charge again. Fast charging protocol typically re-engages from the second cycle onward once the charge IC has a completed profile.

The back of my J5 2017 feels warm near the battery during the first few charges after replacement — is something wrong?

Mild warmth on the first one or two charges is normal for a new Li-Polymer cell. A fresh cell has higher internal impedance than a conditioned one, and the charge IC dissipates slightly more energy as heat during the constant-current phase as a result. If the phone feels hot rather than warm, or if charging stops prematurely, disconnect and check that the battery connector is fully seated — a partially seated connector increases contact resistance and raises heat at the joint. After two or three full cycles, impedance drops and the warmth should be gone.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.