Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Samsung Galaxy J7 2017 Replacement Battery EB-BJ730ABE 3600mAh

Up to 20% off
New arrival
Sale priceFrom $25.99 USD Regular price $31.99
Shipping calculated at checkout.
Fits Samsung Galaxy J7 2017 and Galaxy J7 Pro 2017 Duos, replacing OEM part EB-BJ730ABE.
3.85V and 3600mAh output restores full-day operation on this mid-range processor and 5.5-inch display load.
Connector slides into the battery slot with a single locking tab at the base, no adapter needed.
We bench-tested this cell against the original discharge curve — fuel gauge IC accepted the new BMS without cutoff errors on first cycle.
On first full charge cycle after installation, keep the phone at standard charging speed before enabling fast charge to let the coulomb counter recalibrate against the new cell's discharge curve.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.85V

Amp

3600mAh

Samsung Galaxy J7 2017 — 3.85V Li-Polymer Replacement Battery (EB-BJ730ABE)

This is a 3600mAh, 3.85V lithium-polymer battery for the Samsung Galaxy J7 2017 and Galaxy J7 Pro 2017 Duos. It replaces part number EB-BJ730ABE across SM-J730G/DS and related variants. Capacity is 13.86Wh — matching the original cell specification.

  • J7 2017 and J7 Pro 2017 Duos compatibility: These models share the same physical cell format, connector pinout, and BMS handshake protocol. The SM-J730G/DS and TD-LTE Duos variants draw from the same voltage rail, so one cell covers the full range without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on SM-J730G hardware. The BMS communicated correctly with the charge IC on each pass, and the fuel gauge IC accepted the cell without throwing calibration errors after the first full cycle.
  • Fuel gauge recalibration on first use: On first use after installation, disable fast charging and complete one full discharge-charge cycle at standard rate. This lets the fuel gauge IC map the new cell's discharge curve before high-current charging pushes current into an uncalibrated cell.

Sudden shutdown at 20–30% on the J7 2017 after a cell swap

This is a voltage cliff issue, not a capacity fault. Under peak load — modem transmitting or display at full brightness — the new cell momentarily drops below the shutdown threshold the fuel gauge IC is watching. The IC triggers a hard cutoff even though the coulomb counter still shows charge remaining. One full recalibration cycle — full discharge to below 5%, then charge uninterrupted to 100% — resets the threshold mapping and eliminates most of these events.

Phone won't power on after sitting in storage for several months

Lithium-polymer cells self-discharge in storage. If the cell drops below approximately 2.5V, the BMS enters a lockout state and blocks charge current to prevent thermal runaway on a deeply discharged cell. The phone will show nothing when you press the power button or connect a charger. Connect to a wall adapter — not a PC USB port — and leave it for 20–30 minutes without pressing anything. The BMS requires a sustained low-current trickle before it will re-initialise and allow normal charging to resume.

Compatible Models

Galaxy J7 2017 Galaxy J7 Pro 2017 Duos SM-J730G/DS Galaxy J7 Pro 2017 Duos TD-LTE SM-J730K Galaxy J7 7 TD-LTE SM-J730GM/DS SM-J730F/DS Galaxy J7 2017 Duos TD-LTE Galaxy J7 Pro SM-J730FM/DS

Replaces Part Numbers

EB-BJ730ABE

Technical Specifications

Voltage3.85V
Amp Hours3600mAh
Capacity3600mAh
Rate13.86Wh
Net Weight39.8g /1.40 oz
Gross Weight75g /2.65 oz
Approximate Weight75g /2.65 oz
Dimension 96.46 x 41.70 x 3.88mm

Product Highlights

  • Brand: Samsung
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My J7 2017 says 35% battery and then shuts off without warning — is the new cell faulty?

It is not a faulty cell. This is a fuel gauge IC mismatch — the IC is still calibrated to the discharge curve of the old cell, so it misreads the voltage cliff on the new one and triggers a hard shutdown before the display reaches 0%. Run one complete cycle: drain the phone below 5% until it shuts itself off, then charge uninterrupted to 100% on a wall adapter. That single cycle recalibrates the coulomb counter against the new cell and removes the premature cutoff.

Fast charging stopped working after I replaced the battery — the phone now only charges slowly.

The Samsung Adaptive Fast Charging handshake runs through the BMS, and on the first cycle after a cell swap the charge IC defaults to standard current until it validates the new cell's internal resistance profile. This is normal behaviour. Complete one full standard-rate charge cycle first. After that cycle, fast charging resumes automatically on compatible chargers — no settings change or reset is needed.

The battery percentage jumps around erratically — it skips from 60% down to 41% in seconds.

Erratic percentage jumps are caused by the fuel gauge IC interpolating against a discharge curve it has not yet measured on the new cell. Until the IC has logged at least one full discharge-to-charge cycle, it fills in missing data points with estimates from the old curve, which produces visible jumps. Drain the phone to automatic shutdown, then charge to 100% without interruption on a wall adapter. After that cycle the readings stabilise at roughly ±2% accuracy.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.