Samsung P200 Replacement Battery AA-PBAN6AB 10.8V 4400mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Samsung P200 Replacement Battery AA-PBAN6AB 10.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Samsung P200 Replacement Battery AA-PBAN6AB 10.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
4400mAh
Samsung P200 / P210 / P330 Series — 10.8V Li-ion Replacement Battery (AA-PBAN6AB)
This is a 10.8V, 4400mAh (47.52Wh) Li-ion battery for Samsung P200, P210, P230, and P330 series notebooks, along with 69 additional compatible models. It replaces part numbers AA-PBAN6AB, AA-PLAN6AB, and AA-PLAN9AB. It fits directly into the original bay and connects to the same BMS handshake circuit the Samsung BIOS expects.
- P200 / P210 / P230 / P330 platform fit: These Samsung notebook lines share the same 10.8V three-cell rail, identical connector pinout, and the same EEPROM communication protocol the BIOS uses to read battery state. One cell works across all four model families because the BMS handshake is identical.
- Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on a P210 unit. The BMS initialised correctly on first connection, the BIOS recognised the cell without prompting a firmware warning, and charge current tapered normally at the 4.2V-per-cell ceiling.
- First-cycle calibration on the P-series: After fitting this battery, run the laptop on battery power until it hibernates from low charge, then charge it uninterrupted to 100% without interruption. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on these models.
Why the Samsung P-series BIOS flags a new battery as poor health
The Samsung BIOS reads capacity and cycle data stored in the original cell's EEPROM. When a new cell arrives, that EEPROM data doesn't match the BIOS's stored baseline, so it reports degraded health even though the cell is new. This is a data mismatch, not a hardware fault. One full discharge-to-hibernate followed by an uninterrupted charge resets the learn cycle and brings the health indicator back to normal.
Laptop shuts off at 20–30% charge shown on screen
This happens when the fuel gauge IC hasn't yet calibrated against the new cell's actual voltage curve. The OS reads a state-of-charge percentage based on the old cell's characteristics, but the new cell hits a steeper voltage drop under full CPU and display load at that level. The system interprets the voltage cliff as empty and shuts down before the gauge catches up. Run two to three full discharge-and-charge cycles and the fuel gauge IC recalibrates — the cutoff point will shift back to the correct low-voltage threshold near 3.0V per cell.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Samsung P210 BIOS says battery health is poor right after fitting a new cell — is the replacement faulty?
It isn't a fault. The BIOS compares incoming EEPROM data against a stored baseline from the original cell, and a new cell's EEPROM doesn't match that record. We see this on every P-series swap we bench test — the warning clears after one full discharge-to-hibernate cycle followed by an uninterrupted charge to 100%.
The battery percentage on my P230 jumps around wildly for the first few charges — what's causing that?
The fuel gauge IC is still reading the new cell against calibration data built from the old chemistry. Until it collects enough charge and discharge data points from the replacement cell, the percentage estimates are unreliable. Run two or three complete discharge-to-hibernate then full-charge cycles without interrupting them, and the gauge IC will lock onto the correct voltage curve — readings stabilise from that point.
Windows shows the P330 battery capacity as lower than the rated 47.52Wh in system info — is it undersized?
The Wh figure Windows displays is pulled from the EEPROM on the cell, not measured live. The EEPROM on a replacement cell carries rated chemistry values that don't always match exactly what Windows expects from the original OEM part number. This is a data reporting difference, not a capacity shortfall. After one full calibration cycle, check the reported design capacity again — it typically aligns closer to 47Wh once the BIOS has completed a learn pass.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.



