Samsung Galaxy Tab S4 10.5 Replacement Battery EB-BT835ABU
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Samsung Galaxy Tab S4 10.5 Replacement Battery EB-BT835ABU - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Samsung Galaxy Tab S4 10.5 Replacement Battery EB-BT835ABU - is backordered and will ship as soon as it is back in stock.
Voltage
3.8V
Amp
7300mAh
Samsung Galaxy Tab S4 10.5 — 3.8V Li-Polymer Replacement Battery (EB-BT835ABU)
This 3.8V, 7300mAh Li-Polymer cell replaces the original EB-BT835ABU battery in the Samsung Galaxy Tab S4 10.5. It fits the SM-T830 and SM-T835 variants, including the 2018 TD-LTE model. Swap it when your Tab S4 drains unusually fast, fails to charge past a certain percentage, or shuts down unexpectedly under load.
- SM-T830 and SM-T835 compatibility: Both Wi-Fi and LTE variants of the Tab S4 10.5 use the same battery bay dimensions, connector pinout, and BMS handshake protocol — the EB-BT835ABU fits both without modification.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on SM-T830 hardware. The BMS accepted the cell on first contact, reported capacity correctly after one recalibration cycle, and held voltage within the expected 3.6–4.35V window throughout.
- Fuel gauge recalibration after swap: After installation, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. This resets the fuel gauge IC against the new cell's actual capacity curve and clears the inaccurate percentage readings that typically appear right after a battery swap.
Tab S4 shutting down at 15–25% remaining
This happens because the display backlight and active Wi-Fi together draw enough current to cause a sharp voltage sag in a degraded or freshly installed cell. The BMS reads the voltage drop as a low-battery cutoff event and trips before the fuel gauge percentage catches up. On a new cell, this resolves after one full recalibration cycle — discharge to automatic shutoff, then charge to 100% uninterrupted. If shutdowns persist past two full cycles, check that the battery connector is fully seated and that no pins are bent.
Fast charging not available on the Tab S4 after a battery swap
The Tab S4 uses Samsung's Adaptive Fast Charging protocol, which requires the charge IC to complete at least one accepted charge cycle before negotiating higher wattage. After a battery swap, the tablet often defaults to standard 5V charging on the first cycle. Plug in with the original Samsung charger and cable — third-party cables frequently lack the wiring needed for the handshake. Once one full charge cycle completes, the fast charge indicator should reappear in the notification shade on the next plug-in.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Tab S4 shows 80% battery right after a full charge — why is the percentage wrong after fitting a new battery?
The fuel gauge IC on the Tab S4 is calibrated to the old cell's voltage curve, so it misreads the new cell from the start. Run one complete cycle: discharge the tablet to automatic shutoff, then charge uninterrupted to 100% without using the device. That single cycle gives the IC enough data to recalibrate against the new cell. After that, percentage accuracy returns to normal.
The Tab S4 feels warm near the back during charging after the battery replacement — is the charge IC overheating?
Mild warmth near the battery bay is normal during the first few charge cycles on a new cell. The charge IC on the SM-T830 regulates current more actively while it builds a profile for the new cell, which generates slightly more heat than steady-state charging on a broken-in battery. If the tablet is hot to the touch or triggers a temperature warning on screen, disconnect and check that the battery connector is fully seated with no lifted pins. Surface warmth that fades after a few cycles needs no action.
Battery percentage drops noticeably faster between 100% and 70% than it did on the original cell — is the capacity actually lower?
This is fuel gauge drift, not a capacity shortfall. The IC's discharge curve model is still calibrated to the old cell, so it burns through the top portion of the reported percentage faster than the actual charge level warrants. Run two full discharge-to-shutoff and charge-to-100% cycles without interrupting either. By the end of the second cycle, the IC recalculates its curve against the new cell's actual behaviour and the percentage drop rate normalises across the full range.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




