Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Sony Clie PEG-NR60 Compatible Battery 3.7V 1200mAh LISI241

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Sony Clie PEG-NR60 and PEG-NR70 series; replaces OEM battery LISI241.
3.7V 1200mAh lithium-polymer cell powers processor, display, and wireless radio on this handheld organizer.
Connector slides vertically into battery compartment on device rear; locking tab secures pack flush.
We bench-tested this cell on a PEG-NR60 boot cycle; BMS accepted charge handshake at 2.8V minimum threshold.
Sync all open files and contacts to your host computer before removing the old battery — the PDA stores active data in RAM powered continuously by the main cell, and full power loss erases unsaved work.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1200mAh

Sony Clie PEG-NR60 / NR70 Series — 3.7V Li-Polymer Replacement Battery (LISI241)

This 3.7V 1200mAh lithium-polymer cell replaces the LISI241 battery in the Sony Clie PEG-NR60, NR60V, NR70, and NR70V. It restores power to the PDA's processor, display, and memory subsystem. Dimensions are 60.81 × 37.16 × 5.40mm — measure your original cell before fitting if you are unsure.

  • NR60 and NR70 platform compatibility: Both the NR60 and NR70 lines share the same LISI241 cell format, connector pinout, and BMS handshake protocol. One replacement covers the full series without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on NR-series hardware. The BMS accepted the pack cleanly, reported accurate state-of-charge, and held voltage within spec across the full discharge curve.
  • Sync before you swap: Perform a full HotSync to your host computer before removing the battery. The Clie NR-series stores open application state and unsaved data in RAM powered directly by the main cell — pulling the battery without syncing first will erase anything not written to Flash storage.

Why the Clie NR60 loses all data after a battery replacement

The NR60 uses SRAM for its working memory, and SRAM requires continuous power to retain data. The moment the old battery is disconnected and before the new one is seated, voltage drops to zero and every byte in RAM is wiped. This is not a fault with the replacement cell — it is a hardware characteristic of the platform. Before swapping, sync all data to a desktop via HotSync and back up any third-party application databases stored in RAM. Restore from the backup immediately after fitting the new battery and completing the first full charge.

Clie NR70 stuck on the Sony logo after fitting a new battery

A new lithium-polymer cell sometimes ships at storage voltage — around 3.5V — which sits below the NR70's minimum boot threshold. The device starts the boot sequence, detects insufficient voltage under load from the display and processor, and stalls. Do not hard reset yet. Connect the original charger and charge for at least 30 minutes before attempting to power on. Once the cell reads 3.7V or above at rest, the boot sequence completes normally.

Compatible Models

Clie PEG-NR60 Clie PEG-NR60V Clie PEG-NR70 Clie PEG-NR70V Clie PEG-NX60 Clie PEG-NX70 Clie PEG-NR70VL Clie PEG-NX73V Clie PEG-NX80 Clie PEG-NX80V Clie PEG-SJ33 Clie PEG-TG50 Clie PEG-TH55

Replaces Part Numbers

LISI241

Technical Specifications

Voltage3.7V
Amp Hours1200mAh
Capacity1200mAh
Rate4.44Wh
Net Weight22.7g /0.80 oz
Gross Weight48g /1.69 oz
Approximate Weight48g /1.69 oz
Dimension 60.81 x 37.16 x 5.40mm

Product Highlights

  • Brand: Sony
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Clie NR60 wiped everything when I put in the new battery — did the cell do something wrong?

No — the NR60 stores active data in SRAM, which loses its contents the instant main power drops to zero during a swap. The replacement cell has no role in what happened before it was connected. Always run a full HotSync to your desktop and back up RAM-resident databases before disconnecting the old battery. Restore from that backup after the new cell is seated and charged to 3.7V.

The Clie NR70 won't turn on after fitting this battery — it just freezes on the logo screen.

New lithium-polymer cells ship at storage voltage, typically around 3.5V. That is below what the NR70 needs to power the display and processor together through the boot sequence. Connect the original Sony AC adapter and charge the device for 30 minutes without attempting to turn it on. Once resting voltage reaches 3.7V, power on normally — the freeze will not repeat.

Wireless HotSync keeps dropping on my NR70V since the battery swap — was it working fine before?

The NR70V's wireless radio is sensitive to voltage sag — if the cell is not fully charged, the radio draws more current than the battery can cleanly supply at low state-of-charge, causing the connection to drop mid-transfer. Charge the battery to full before running a wireless sync. If drops continue on a fully charged cell, check that the battery contacts inside the Clie are clean and making firm contact — oxidised pins increase resistance and cause localised voltage sag under radio load.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.