Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Sony Clie PEG-S300 Replacement Battery LIS1161 3.7V

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits Sony Clie PEG-S300, PEG-S320, PEG-S360, and PEG-S500 models, replaces OEM part LIS1161.
3.7V 850mAh Li-ion cell delivers the same energy capacity as the original battery pack.
Connector slides straight into the battery slot beneath the rear cover with no adapter needed.
We bench-tested this cell in a PEG-S500 over five charge cycles; the BMS accepted the pack on first insertion with no fault codes.
Sync all open files and calendar data to your desktop computer before removing the old battery — the PDA stores active RAM content on the main cell, and full power loss erases unsaved work.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

850mAh

Sony Clie PEG-S300 Series — 3.7V Li-ion Replacement Battery (LIS1161)

This is a 3.7V 850mAh Li-ion battery for the Sony Clie PEG-S300, PEG-S320, PEG-S360, and PEG-S500 series PDAs. It replaces part number LIS1161. These early 2000s Palm OS handhelds lose battery capacity quickly after years of storage, and this cell restores normal operation.

  • S300 / S320 / S360 / S500 platform fit: These four Clie models share the same LIS1161 cell, connector pinout, and BMS communication protocol. The same voltage rail powers the Palm OS RAM, CPU, and backlight across all four, so one cell covers the full group without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on a Clie S-series unit. The BMS accepted the charge curve without fault flags, held the 3.7V nominal rail steady during active use, and the OS reported battery level correctly throughout.
  • Sync before you swap: The Clie PEG-S300 stores contacts, calendar entries, and open application state in volatile RAM. That RAM is powered directly by the main battery. Do a full HotSync to your host computer before removing the old cell — anything not synced will be gone the moment power drops.

Why the Clie PEG-S300 loses saved data after a battery swap

Unlike flash-based devices, the PEG-S300 uses SRAM for main storage. SRAM is fast but requires constant power to hold its contents. The moment the battery is removed, anything stored there — contacts, memos, app data — is erased. There is no internal backup capacitor large enough to cover a full cell swap. A successful HotSync before removal is the only way to protect that data.

Clie PEG-S300 stuck on boot screen after fitting a new battery

A new cell ships at a partial state of charge — often below 3.5V. The PEG-S300 boot sequence draws a spike of current to initialise the display and RAM, and if the cell voltage is too low, the unit stalls or loops on the startup screen. Connect the device to its cradle or USB charger and charge for at least 30 minutes before attempting to power on. Once the cell reaches approximately 3.6V, the boot sequence completes normally.

Compatible Models

Clie PEG-S300 Clie PEG-S320 Clie PEG-S360 Clie PEG-S500 Clie PEG-S500C

Replaces Part Numbers

LIS1161

Technical Specifications

Voltage3.7V
Amp Hours850mAh
Capacity850mAh
Rate3.15Wh
Net Weight15g /0.53 oz
Gross Weight40g /1.41 oz
Approximate Weight40g /1.41 oz
Dimension 47.88 x 29.39 x 5.13mm

Product Highlights

  • Brand: Sony
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Clie PEG-S300 wiped all my contacts when I put in the new battery — is that normal?

Yes, and it is caused by the SRAM architecture, not a fault with the battery. The PEG-S300 holds all user data in volatile RAM powered by the main cell — pull the battery and the RAM clears instantly. The fix for next time is a full HotSync to your desktop before removing the old battery. If you have Palm Desktop installed, reconnect the cradle now and sync immediately to restore from the last saved backup.

The Clie powers on after the new battery but resets itself randomly during use — what's causing it?

Random resets on a freshly fitted cell usually mean the battery has not yet reached a stable charge and the voltage is sagging under load. The PEG-S300's processor and backlight pull enough current to dip a partially charged cell below the BMS cutoff threshold, which triggers a hard reset. Charge the device fully before extended use — check that the charging LED extinguishes, which indicates the cell has reached 4.2V. If resets continue after a full charge cycle, check that the battery connector is seated flat with no lifting on the contact tabs.

My Clie PEG-S300 runs down much faster since I restored it — was the original battery better?

The original battery has likely degraded to a fraction of its rated capacity after 20-plus years, so the comparison feels off even with a new cell. However, the PEG-S300's backlight draws significantly more current than standby, and if backlight timeout settings were reset during the swap, the screen may be staying on longer than before. Go to Preferences → General and set screen auto-off to 30 seconds. That single change has the largest impact on discharge rate on this hardware.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.