Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Sony Clie PEG-J25 PDA Compatible Battery 3.7V 1350mAh

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Sony Clie PEG-J25 and PEG-TJ35 models, replaces OEM part PL-383450.
3.7V, 1350mAh Li-Polymer cell delivers full charge capacity to the PEG-J25 PDA platform.
Connector seats into the battery bay with a single locking tab on the rear edge.
We cycled this cell on a PEG-J25 bench unit — BMS accepted the pack on insertion, no fault codes.
Sync all open calendar entries and contacts to your host computer before removing the old battery; PDA RAM loses power during the swap and unsaved data will not recover.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1350mAh

Sony Clie PEG-J25 / PEG-TJ35 — 3.7V Li-Polymer Replacement Battery (PL-383450)

This 3.7V, 1350mAh Li-Polymer cell replaces the original PL-383450 battery in the Sony Clie PEG-J25 and PEG-TJ35 handheld PDAs. Both devices run Palm OS and store contacts, calendar data, and application state in RAM that depends on continuous battery power. Swapping this cell restores full PDA operation when the original battery no longer holds a charge.

  • PEG-J25 and PEG-TJ35 compatibility: Both models use the same PL-383450 cell with identical voltage rail, connector pinout, and physical footprint at 61.20 × 34.69 × 3.92mm. The BMS on each device communicates charge state the same way, so one cell covers both units without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on PEG-series hardware. The BMS accepted the cell without fault codes, balanced to full charge correctly, and held voltage within the expected range across load cycles.
  • RAM data sync before removal: Perform a full HotSync to your PC before removing the old battery. The Clie stores open application state, unsaved memos, and contacts in volatile RAM powered directly by this cell. Cutting power without syncing first can wipe that data permanently.

Why the Clie PEG-J25 loses saved data after a battery swap

Palm OS devices keep a portion of working data in SRAM, which requires continuous battery voltage to retain its contents. When the main cell drops below roughly 3.0V or is removed entirely, that SRAM loses power and the data it holds is gone. This is not a fault with the new battery — it is how the architecture works. The fix is a HotSync before any battery work, so the host PC holds a full backup ready to restore.

Clie not booting after new battery installed

A freshly shipped Li-Polymer cell can arrive at a storage charge of around 3.6–3.7V, which is below the minimum threshold some Palm OS boot sequences require. The device may power on briefly then shut down, or show nothing at all. Charge the new cell fully before attempting the first boot — connect to the Clie cradle or USB cable and allow a complete charge cycle to 4.2V. After that, boot proceeds normally.

Compatible Models

Clie PEG-J25 Clie PEG-TJ35

Replaces Part Numbers

PL-383450

Technical Specifications

Voltage3.7V
Amp Hours1350mAh
Capacity1350mAh
Rate5Wh
Net Weight19g /0.67 oz
Gross Weight44g /1.55 oz
Approximate Weight44g /1.55 oz
Dimension 61.20 x 34.69 x 3.92mm

Product Highlights

  • Brand: Sony
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Clie PEG-J25 wiped all my contacts and calendar after I swapped the battery — is the new cell faulty?

The cell is not faulty. The PEG-J25 holds contacts, calendar entries, and app data in volatile SRAM that loses its contents the moment battery power is cut. This happens even with a fully charged replacement. Always run a HotSync to your PC before removing the old battery, then restore from that backup after fitting the new cell.

The Clie powers on for a second then shuts straight back off after fitting the new battery — what's wrong?

Li-Polymer cells ship at a reduced storage voltage, often around 3.6V, which can fall below the PEG-TJ35 and PEG-J25 boot threshold. The device starts the boot sequence, detects insufficient voltage, and shuts down as a protection measure. Place the Clie in its cradle or connect it to charge before powering it on — let it reach a full 4.2V charge first, then boot normally.

Battery life on my PEG-TJ35 seems noticeably shorter since I replaced the cell — is 1350mAh correct?

The 1350mAh rating matches the original PL-383450 spec for this device. Shorter-than-expected endurance on a new cell usually means the battery has not completed its first few full charge cycles — capacity stabilises after two or three complete charge and discharge cycles on the device. If life is still low after cycling, check whether the backlight is set to maximum brightness, as the PEG series display draw is the single largest factor in daily capacity consumption.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.