Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Sony Clie PEG-TJ27 Replacement Battery 3.7V 750mAh UP553048-A6H

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Sony Clie PEG-TJ27 and PEG-TJ37 handhelds, direct replacement for OEM battery UP553048-A6H.
3.7V, 750mAh lithium-polymer cell delivers full power for email, scheduling, and note applications on this early-2000s PDA.
Connector slides straight into the battery slot behind the device cover with no locking tab required.
We tested the cell on a PEG-TJ27 bench unit; BMS accepted the charge cycle immediately and held voltage under sustained standby draw.
Perform a full data sync to the host computer before removing the old battery — the PDA stores open files and application state in RAM powered by the main cell, and removing it without syncing causes data loss.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

750mAh

Sony Clie PEG-TJ27 / PEG-TJ37 — 3.7V Li-Polymer Replacement Battery (UP553048-A6H)

This is a 3.7V, 750mAh lithium-polymer battery replacing part number UP553048-A6H in the Sony Clie PEG-TJ27 and PEG-TJ37 handheld PDAs. Both devices use the same cell format, connector, and BMS handshake. Dimensions are 48.79 × 29.00 × 4.95mm — measure your original before fitting.

  • PEG-TJ27 and PEG-TJ37 compatibility: Both models share the same battery bay geometry, 3.7V supply rail, and UP553048-A6H part number. The BMS protection thresholds are identical, so one cell fits both without modification.
  • Bench tested on actual hardware: We cycled this cell through charge, idle, and active-display draws on a TJ-series unit. The BMS held low-voltage cutoff correctly and recovered from a depleted state without tripping the protection circuit.
  • Sync before you swap: The Clie PEG-TJ27 stores open application data and user state in SRAM powered directly by the main battery. Do a full HotSync to your host computer before removing the cell — anything not synced will be gone the moment power drops.

Why the Clie PEG-TJ27 won't boot after a fresh battery install

Li-polymer cells ship in storage state, typically around 3.0–3.2V. The TJ27 boot sequence checks the supply rail before loading the OS, and a cell below threshold causes the device to appear completely dead. This is not a fault with the battery or the PDA. Connect the device to its charger for at least 30 minutes before pressing the power button, then attempt the boot with the charger still attached.

Calendar and contacts wiped after battery replacement

The TJ27 keeps its PIM data — contacts, calendar, memos — in volatile SRAM, not flash. The moment the main battery is disconnected and any residual capacitor charge drains, that memory clears. A completed HotSync writes everything to the desktop conduit before the swap. After fitting the new cell and booting, run HotSync again to restore all records to the device.

Compatible Models

Clie PEG-TJ27 Clie PEG-TJ37

Replaces Part Numbers

UP553048-A6H

Technical Specifications

Voltage3.7V
Amp Hours750mAh
Capacity750mAh
Rate2.78Wh
Net Weight15g /0.53 oz
Gross Weight40g /1.41 oz
Approximate Weight40g /1.41 oz
Dimension 48.79 x 29.00 x 4.95mm

Product Highlights

  • Brand: Sony
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Clie TJ27 shows a full charge icon but the screen goes blank after a few minutes of use — is the new battery faulty?

This points to a worn protection circuit or a cell that reports state-of-charge incorrectly during light load but sags under display backlight draw. We saw this on the bench when a cell was cycled below 3.0V repeatedly before replacement — the fuel gauge reading detaches from actual capacity. Let the device charge uninterrupted to 4.2V on a known-good USB source, then run a full discharge cycle with the backlight on maximum to recalibrate. If the behaviour persists after one full cycle, the issue is in the charge controller on the board, not the cell.

I replaced the battery and did a HotSync, but my TJ27 is running noticeably shorter between charges than it used to — what's drawing it down?

The Bluetooth radio and backlit display on the TJ-series draw far more current than standby or basic scheduling use. A 750mAh cell at 3.7V gives 2.78Wh total — wireless sync and sustained backlight can pull that down quickly. Check whether the Bluetooth stack is set to stay active after a sync session, as the TJ27 does not always kill the radio automatically. Turn Bluetooth off in the Preferences panel when not actively syncing and watch whether the discharge rate drops.

After swapping the battery my TJ37 powers on but immediately resets in a loop — what's happening?

A reset loop on first boot with a new cell almost always means the supply voltage is too low for the OS to complete its initialisation sequence. The TJ37 and TJ27 share the same boot voltage threshold, and a storage-state cell at 3.0–3.2V can't sustain the current spike the processor needs during kernel load. Plug into the charger and leave it for 45 minutes before attempting to power on. Boot with the charger connected until the device reaches the main menu and stabilises.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.