Summer 29600-10 Baby Monitor Replacement Battery 4.8V 1000mAh

Summer Glimpse 29600-10 — 4.8V Ni-MH Replacement Battery (29600-10, 29580-10)

This is a 4.8V, 1000mAh Ni-MH battery for the parent unit of the Summer Glimpse and Infant Full View 5" Video Baby Monitor systems. It also fits the In View, Full View, and more than ten additional Summer monitor models sharing the same OEM part numbers 29600-10 and 29580-10. Voltage and capacity match the original Summer specification exactly.

• Glimpse and Infant Full View series compatibility: These Summer monitor lines share the same 4.8V Ni-MH cell configuration, connector pinout, and battery bay dimensions — 46.40 × 42.50 × 10.80mm — so one battery part number covers the full range without modification.
• Bench tested on actual hardware: We cycled this battery through the parent unit's charge and discharge circuit, confirmed the NTC thermistor line communicated correctly with the charger, and verified the unit held a stable display and audio link throughout the discharge cycle.
• Night vision charge threshold: The IR LEDs on Summer parent units draw additional current in low-light mode. If you swap the battery and use the monitor immediately in a dark room, night vision may flicker. Charge the parent unit fully before the first overnight session.

Parent unit not connecting to camera unit after battery swap

When the parent unit loses power completely — which happens during a battery swap — many Summer monitors drop their stored wireless pairing with the camera unit. The radio module reinitialises on boot but may not automatically renegotiate the link. If the screen shows "searching" or displays no video after the swap, manually re-pair by holding the pair button on the camera unit until the parent unit locks on. This is not a battery fault — it is a power-loss reset behaviour in the monitor firmware.

Parent unit battery draining faster overnight than it did when new

Running the screen on continuously through the night is a sustained high-draw condition for a 1000mAh cell. Ni-MH capacity also drops in the first few charge cycles on a fresh battery — expect the first two cycles to show shorter run time than subsequent ones. Enable the screen timeout in the parent unit's settings so the display dims between alerts. After three full charge and discharge cycles, capacity stabilises at its rated 1000mAh level.