VTech 5829 Cordless Phone Replacement Battery 3.6V 700mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
VTech 5829 Cordless Phone Replacement Battery 3.6V 700mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
VTech 5829 Cordless Phone Replacement Battery 3.6V 700mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.6V
Amp
700mAh
V Tech 5829 / 5839 / 5851 / 5859 Series — 3.6V Ni-MH Replacement Battery (80-0099-00-00)
This is a 3.6V, 700mAh Ni-MH battery for V Tech cordless phone handsets in the 5829, 5839, 5851, and 5859 series, plus over 79 additional compatible models. It replaces OEM part numbers 80-0099-00-00, 80-1323-00-00, and 89-1323-00-00. The battery slots into the handset compartment and powers the DECT radio and speaker circuitry away from the base station.
- 5829/5839/5851/5859 platform fit: These handsets share the same 3.6V battery bay, connector polarity, and NiMH charge acceptance profile. The base station charges at a fixed trickle rate matched to this chemistry — swapping in a different voltage or chemistry will cause the charge circuit to behave incorrectly.
- Bench tested on actual hardware: We ran this cell through the base station charge cycle and confirmed the BMS accepts the incoming trickle current without triggering a fault light. Discharge curves stayed flat across the rated capacity window before the protection circuit cut off at the low-voltage floor.
- First charge on NiMH cordless handsets: After installing, seat the handset in the base and leave it for a full 16 hours before use. NiMH cells shipped from storage have partially self-discharged — a slow first charge cycles the cell chemistry to rated capacity. Skipping this step shortens talk time from the first day.
Talk time shorter than the original battery after replacement
NiMH cells need three to five full charge-discharge cycles before they reach rated capacity. A new battery will feel weaker than the old original in the first few days — this is normal cell conditioning, not a fault. Each full cycle builds the electrochemical capacity closer to the rated 700mAh. Run the handset until it powers down, return it to the base for a full charge, and repeat for at least three cycles.
Base station showing no charge or error light after swap
Batteries stored in a warehouse can self-discharge below the threshold the base station accepts as a valid NiMH pack. When the terminal voltage is too low, the base charge circuit reads it as a fault and refuses to begin the charge cycle. Place the handset in the base and leave it undisturbed for at least 30 minutes — most base stations will attempt a recovery trickle at around 1.0V per cell. If the error light clears, the charge cycle has started; leave the handset in the base for the full 16-hour initial charge.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: V Tech
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My V Tech handset is losing range after I put in the new battery — calls cut out as I walk away from the base. What's causing this?
NiMH voltage sags under the RF transmit load when the cells haven't been fully conditioned yet. The DECT radio in the 5829/5859 series needs a stable voltage rail to sustain transmit power — a partially charged or unconditioned NiMH pack drops voltage mid-transmission and the radio backs off its range. Run three full charge-discharge cycles first: use the handset until it powers down, then charge for 16 hours in the base. After the third cycle, the voltage sag under RF load reduces significantly.
My handset lost its pairing with the base after I swapped the battery. How do I get it back?
Removing the battery completely cuts power to the handset's memory — some DECT phones in the 5829/5859 series drop their base pairing when power is fully removed. This is a phone firmware behaviour, not a battery fault. Re-register the handset manually: on most V Tech models, press and hold the FIND HANDSET button on the base for four seconds, then go into the handset menu and select Register Handset. Consult your model's manual for the exact menu path if the prompt doesn't appear automatically.
The battery drains overnight even though the handset is sitting in the base. Is the battery faulty?
A battery draining overnight usually means the handset isn't making a solid electrical connection with the base charging contacts. Check that the handset is fully seated — even a slight tilt or debris on the charging pins will stop the trickle charge while the standby circuitry keeps drawing current. Clean the gold contacts on both the handset and the base cradle with a dry cloth, reseat the handset, and confirm the charge indicator light comes on within 60 seconds of placing it in the base.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




